• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.126-132
• /
• 1978

This study was carried out through the survey questionaries in order to get the information for proper operating technique of the two-wheel tractors which are widely used in the farm, and investigated various accidents which occurred during the operation of two-wheel tractors for farm works in 7 Provinces of Korea. The summarized results are as follows ; 1. Annual accident frequency of the two-wheel tractor was 2.07 times, and the average rate of accident was 0.72 times per hour. Its value was the largest in the pre-operations , and the smallest in the threshing operation. 2. The accident distribution according to each month was nearly propertional to the operating hours of the two-wheel tractor. More than 60 % of total accident was concentrated during the rice transplanting and harvesting season. 3. The careless accident was more than 50% of total accident , and inevitable accident about 18% . The rate of careless accident showed the highest in pre-operation such as engine starting, check, and adjustment, and belt change. 4. The serious wounded operator was 7.1 % to total wounded operator , and about 50 % of accident of casualties to operators occurred during haruling operations. 5. The amount of casualties to property was range of 1,000 to 10,000 won, and annual total amount per unit tractor could be estimated to be 10 , 000 won.

• Journal of Drive and Control
• /
• v.11 no.2
• /
• pp.22-29
• /
• 2014

This paper presents simulation-based analysis of energy flow of a wheel loader. The objective of this study is to analyze the energy flow of a wheel loader during driving and working. Because the wheel loader powertrain consists of a mechanical and hydraulic powertrain, the generated power from the engine is divided into 2 powertrains. Further, a virtual prediction of energy flow in the powertrains is a key factor in terms of optimal design. Accordingly, the simulation model that is able to predict the virtual energy flow is developed and analyzed in this study. The proposed wheel loader simulation model has been constructed in the Matlab/Simulink environment. It is expected that the developed simulation model will analyze the energy flow and efficiency in the design stage.

• Journal of Biosystems Engineering
• /
• v.13 no.4
• /
• pp.1-8
• /
• 1988

A series of soil bin experiments was carried out on land to evaluate the soil physical properties whether they are pertinent to soil-wheel system and to investigate if true model theory u applicable to powered rigid wheel-soil system. Four different sized wheels having diameter of 45, 60, 75 and 90 em were wed for the experiment. The following conclusion was derived from the study. (1) True model theory can be sufficiently utilized to study the wheel traction and linkage on lands. (2) For both dry and wet sands, Cone Index(CI) and soil shear parameters (c, ${\phi}$) with bulk density (${\gamma}$) were found to be good measures of soil physical properties which are pertinent to predict the performance of the powered rigid wheel-soil system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.47-50
• /
• 2003

Hot-forging Process and die design was made for a large-scale compressor wheel of Ti-6Al-4V alloy with 2-D FE analysis. The design integrated the geometry-controlled approach and dynamic materials modelling(DMM). In order to obtain the processing contour map of Ti-6Al-4V alloy based on DMM, compression tests were carried out in the temperature range of 915$^{\circ}C$ to 1015$^{\circ}C$ and the strain range of 10$\^$-3/s$\^$-1/ to 10s$\^$-1/. In the die design of the compressor wheel using the rigid-plastic FE analysis, forging dimensional accuracy, the capacity of the forging machine and defect-free forging were considered as main design factors. The microstructure of hot forged wheel using the designed die showed a typical alpha-beta structure without forging-defects.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.29-34
• /
• 2014

Cooling the in-wheel motor in electric vehicles is critical to its performance and durability. In this study, thermal flow analysis was conducted by evaluating the thermal performance of two conventional cooling models for in-wheel motors under the continuous rating base speed condition. For conventional model #1, in which cooling oil was stagnant in the lower end of the motor, the maximum temperature of the coil was $221.7^{\circ}C$; for conventional model #2, in which cooling oil was circulated through the exit and entrance of the housing and jig, the maximum temperature of the coil was $155.4^{\circ}C$. Therefore, both models proved unsuitable for in-wheel motors since the motor control specifications limited the maximum temperature to $150^{\circ}C$.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.211-219
• /
• 2000

This paper simulated surface grinding process with statistically simulated grinding wheel topography, considering ridge formation phenomenon when grain scratch workpiece. Wheel grain is modeled as hybrid sphere and cone. Grinding wheel characteristic was evaluated with stylus by expanding the scanning region of the profilometer from a straight line to a plane. Each grain's diameter and semi-angle are assumed as normal distribution, each grain's protrusion height from wheel plane is assumed gamma distribution. So grinding wheel is simulated with grain's position randomly distributed without overlapping. Ground surface is 3-dimensionally simulated considering ridge formation of workpiece by each grain's cutting, and then surface profile and surface roughness parameters are compared with real ground workpiece.

• International Journal of Automotive Technology
• /
• v.5 no.2
• /
• pp.69-76
• /
• 2004

This paper evaluates the effectiveness of four-wheel-steering system from the viewpoint of lane-keeping control theory. In this paper, the lane-keeping control system is designed on the basis of the four-wheel-steering automobiles whose desired steering response is realized with the application of model matching control. Two types of desired steering responses are presented in this paper. One is zero-sideslip response, the other one is steering response which realizes zero-phase-delay of lateral acceleration. Using simplified linear two degree-of-freedom bicycle model, simulation study and theoretical analysis are conducted to evaluate the lane-keeping control performance of active four-wheel-steering automobiles which have different desired steering responses. Finally, the evaluation is conducted on straight and curved roadway tracking maneuvers.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.121-125
• /
• 1992

Grinding is considered as a very effective machining technology to attain the good surface quality of a components. However, the grinding operation still needs the skill and experience of an operator because of a lack of scientific and engineering principles. Therefore, recent development focus on expert systems which deal with domain specific knowledge in order to solve this problem. This paper describes an expert system for selecting the optimism grinding wheel by using the fuzzy reasoning and operation conditions in grinding. By the system unskilled workers will be able to make use of the knowledge and experience of skilled workers. The system is consist of programs that, (1) selection of the best wheel form among avairable wheel by using fuzzy reasoning, (2) determine wheel depth of cut, feed and wheel speed for grinding, work speed, and dressing condition. The developed system perform in using the CLIPS as a software tool and run under the IBM PC/AT as a hardware tool.

• Journal of Korean Society for Quality Management
• /
• v.33 no.1
• /
• pp.32-41
• /
• 2005

This paper presents a six sigma application case study for an automobile steering wheel manufacturing process using rolled throughput yield improvement activity. Hidden factory and first pass yield concept is introduced and a DMAIC procedure is implemented to maximize the first pass yield. The result of the six sigma project amounts to the reduction of failure cost of 1.2 billion won per year in the steering wheel manufacturing process. This paper can benefit six sigma practitioners in some ways.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.612-617
• /
• 2014

It is generally known that the automotive road wheel involves the non-proportional multiaxial loading condition, therefore the measuring dynamic stress and strain in driving state is very important to predict an endurance characteristic of the automotive road wheel. In this study, the ultimate driving test using F1 circuit with respect to 2 kinds of velocity conditions have been carried out in order to measure dynamic stress, strain of the wheel and acceleration of a vehicle. Based on the measured results, the characteristics of dynamic stress generation have been analyzed, and factors which have effect on the dynamic stress generation have been studied.