• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.84.2-84.2
• /
• 2010

PEMS (printed electro-mechanical system) is fabricated by means of various printing technologies. Passive and active components in 2D or 3D such as conducting lines, resistors, capacitors, inductors and TFT, which are printed with functional materials, can be classified in this category. And the issue of PEMS is applied to a R2R process in the manufacturing process. In many electro-devices, the vacuum process is used as the manufacturing process. However, the vacuum process has a problem: it is difficult to apply toa continuous process as a R2R printing process. In this paper, we propose an ESD (electro static deposition) printing process has been used to apply an organic solar cell of thin film forming. ESD is a method of liquid atomization by electrical forces, anelectrostatic atomizer sprays micro-drops from the solution injected into the capillary, with electrostatic force generated by electric potential of about tens of kV. ESD method is usable in the thin film coating process of organic materials and continuous process as a R2R manufacturing process. Therefore, we experiment the thin films forming of PEDOT:PSS layer and Active layer which consist of the P3HT:PCBM. The result of experiment, organic solar cell using ESD thin film coated method is occurred efficiency of about 1.4%. Also, the case of only used to ESD method in the active layer coating is occurred efficiency of about 1.86% as the applying a spin coating in the PEDOT:PSS layer. We can expect that ESD method is possible for continuous process to manufacture in the organic solar cell or OLED device.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.330-335
• /
• 2000

This paper deals with sensing ability of smart sensor that has a sensing ability of distinguish materials. We have developed new signal processing method that have distinguish different materials. We made the two type of smart sensors for experiment. The first type of smart sensor is H2 type. The second type of smart sensor is HH type. The smart sensor was developed for recognition of material. And then we developed estimation method of sensing ability of smart sensors. The first method(Sensing Ability Index) is developed for H2 smart sensor. The second method($R_{SAI}$ Index) is developed for HH smart sensor. We estimated sensing ability of smart sensor with new SAI and $R_{SAI}$ method. This paper describes our primary study for a new method of estimate sensing ability of smart sensor, which is need for precision work system. This is a study of dynamic characteristics of smart sensor according to frequency and displacement changing with new SAI and $R_{SAI}$ method. Experiment and analysis are executed for proper dynamic sensing condition. First, we developed advanced smart sensors. Second, we develop new SAI and $R_{SAI}$ methods that have a sensing ability of distinguish materials. Dynamic characteristics of smart sensor are evaluated through new SAI and $R_{SAI}$ method relatively. We can use the new SAI and $R_{SAI}$ method for finding materials. Applications of this method are finding abnormal condition of object(auto-manufacturing), feeling of object(medical product), robotics, safety diagnosis of structure, etc.

• 한국토양비료학회지
• /
• 제1권1호
• /
• pp.117-123
• /
• 1968

실험실내(實驗室內)에서의 가장 간편(簡便)하고 우리나라 조건(條件)에 맞는 석회소요량(石灰所要量) 결정법(決定法)을 선정(選定)하기 위(爲)하여 26종토양(種土壤) 표토시료(表土試料)의 화학적(化學的) 성질(性質)을 조사(調査)하는 동시(同時)에 3종(種)의 완충곡선법(緩衝曲線法)에 의(依)한 석회소요량(石灰所要量)을 조사(調査)하여 표준(標準)이 될 만한 완형선곡법(緩衡線曲法)을 정(定)하고 이 방법(方法)에 의(依)한 석회소요량(石灰所要量)을 조사(調査)하여 표준(標準)이 될 만한 완충곡선법(緩衝曲線法)을 정(定)하고 이 방법(方法)에 의(依)한 석회소요량(石灰所要量)을 Shoemaker 법(法), Woodruff 법(法) 및 O.R.D. 법(法)과 비교논평(比較論評)한 결과(結果)는 대략(大略) 다음과 같다. 1. 토양(土壤)의 염기포화도(鹽基飽和度)(X)와 완충곡선법(緩衝曲線法)I에 의(依)한 $Ca(OH)_2$ 소요량간(所要量間)에는 y=9.69-0.106X의 회귀관계(回歸關係) 및 1%수준(水準)에서 유의(有意)한 부(負)의 상관계수(相關係數)(r=-0.84)를 얻었다. 2. 토양(土壤)의 치환성(置換性) 수소(水素)이온(X)과 완충곡선법(緩衝曲線法)에 의(依)한 $Ca(OH)_2$ 소요량(所要量)(y)간(間)에는 y=2.05-0.86X ($r=0.86^{**}$)의 관계(關係)가 있으며 치환성수소(置換性水素) 및 치환성(置換性) Aluminum 합계량(合計量)(X)과 $Ca(OH)_2$ 소요량(所要量)(y)간(間)에는 y=1.19+0.71X($r=0.944^{**}$)의 관계(關係)를 얻었으며 이로써 토양중(土壤中)의 치환성수소함량(置換性水素含量)만의 경우보다 치환성수소(置換性水素)와 Aluminum을 합(合)한 양(量)과 $Ca(OH)_2$ 소요량간(所要量間)의 관계(關係)가 더 밀접(密接)함을 보였다. 3. 완충곡선(緩衝曲線)을 작성(作成)할 때 N-KCl, $CaCl_2$ 등(等) 중성염(中性鹽)을 미리 가(加)하고 $Ca(OH)_2$를 가(加)하였을 때와 통상(通常)의 방법(方法)으로 작성(作成) 하였을 때의 중화(中和)에 소요(所要)된 석회소요량(石灰所要量)과 공시토양중(供試土壤中)의 치환성수소(置換性水素)와 Aluminum 합계량(合計量)과의 관계(關係)를 조사(調査)한 결과(結果) 통상(通常)의 방법(方法)으로 완충곡선(緩衝曲線)을 작성(作成)하여 석회소요량(石灰所要量)을 결정(決定)하는 것이 가장 합리적(合理的)인 방법(方法)이라는 결과(結果)를 얻었다. 4. 가장 합리적(合理的)인 완충곡선법(緩衝曲線法) I에 의(依)한 석회소요량(石灰所要量)(X)과 Woodruff 법(法), Shoemaker 법(法) 및 O.R.D.법(法)에 의(依)한 석회소요량간(石灰所要量間)에는 각각(各各) y=1.95+0.84X ($r=0.91^{**}$), y=166+0.76X($r=0.92^{**}$) 및 y=2.79+0.82X($r=0.89^{**}$)의 관계(關係)가 있으며 본(本) 실험(實驗)의 공시토양조건하(供試土壤條件下)에서는 Shoemaker법(法)이 실험실내석회소요량(實驗室內石灰所要量) 측정방법(測定方法)으로 합리적(合理的)이고 현지포장(現地圃場)에서 간역(簡易) 검정법(檢定法)으로 사용중(使用中)인 O.R.D.법(法)도 실험실내방법(實驗室內方法)과 별(別)로 손색(損色)이 없는 방법(方法)이라고 생각(生覺)되기 때문에 이 두 방법(方法)을 우리나라에서는 통일(統一)해서 사용(使用)할 것을 제안(提案)한다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권2호
• /
• pp.141-149
• /
• 1997

L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ powders were prepared by both GNP(Glycine-Nitrate Process) and solid state reaction method in various of calcination temperature(800-1000.deg. C) and time in air. Also, L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ cathode contacts on YSZ(Yttria-Stabilized Zirconia) substrate were prepared by screen printing and sintering method as a function of sintering temperature(1100-1450.deg. C) in air. Sintering behaviors have been investigated by SEM(Scanning Electron Microscope) and porosity measurement. Compositional and structural characterization were carried out by X-ray diffractometer and ICP AES(Inductively Coupled Plasma-Atomic Emission Spectrometry) analysis. Electrical characterization was carried out by the electrical conductivity with linear 4 point probe method. As the calcination period increased in solid state reaction method, L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ phase increased. Although L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ single phase was obtained only for 48hrs at 1000.deg. C, in GNP method it was easy to get single and ultra-fine L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ powders with submicron particle size at 650.deg. C for 30min. The particle size and thickness of L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ cathode contact by solid state reaction method did not change during the heat treatment, while those by GNP method showed good sintering characteristics because initial powder size fabricated from GNP method is smaller than that fabricated from solid state reaction method. Based on enthalpy change from thermodynamic data and ICP-AES analysis, it was suggested to make cathode contact in composition of (L $a_{0.7}$S $r_{0.3}$)$_{0.91}$ Mn $O_{3}$ which have little second phase (L $a_{2}$Z $r_{2}$ $O_{7}$) for high efficient solid oxide fuel cells applications. As (L $a_{0.7}$S $r_{0.3}$)$_{0.91}$Mn $O_{3}$ cathode contact on YSZ substrate was sintering at 1250.deg. C the temperature that liquid phase sintering did not occur. It was possible to obtain proper cathode contacts with electrical conductivity of 150(S/cm) and porosity content of 30-40%.m) and porosity content of 30-40%.

• ETRI Journal
• /
• 제31권1호
• /
• pp.68-70
• /
• 2009

In this letter, a parametric analysis of the Fresnel-field antenna measurement method is performed for a square aperture. As a result, the optimum number of Fresnel fields for one far-field point is guided as $M_{opt}=N_{opt}=D^2/{\lambda}R+5$, where D is the antenna diameter, ${\lambda}$ is the wavelength, and R is the distance between the source antenna and the antenna under test. For the aperture size 5 ${\leq}$ $L_x/{\lambda}$ ${\leq}$ 20, the tolerable distances for gain errors of 0.5 dB and 0.2 dB can be guided as $R_{0.5\;dB}$ ${\approx}$ $1.2Lx/{\lambda}$ and $R_{0.2\;dB}$ ${\approx}$ $2.0L_x/{\lambda}$, where $L_x$ is the lateral length of the square aperture. The tolerable distances for 20 ${\leq}$ $L_x/{\lambda}$ ${\leq}$ 200 are also proposed. This measurement guideline can be fully utilized when performing the Fresnel-field antenna measurement method.

• Archives of Pharmacal Research
• /
• 제29권1호
• /
• pp.108-111
• /
• 2006

The economic and effective method for preparation of R-(-)-ibuprofen by diastereomer crystallization was developed. R-(-)-ibuprofen was resolved from racemic ibuprofen by forming R-(-)ibuprofen-R-(+)-$\alpha$-methylbenzylamine diastereomeric salt with R-(+)-$\alpha$-methylbenzylamine and crystallization. The purity of R-(-)-ibuprofen-R-(+)-$\alpha$-methylbenzylamine diastereomeric salt was tested and confirmed using HPLC and $^1H-NMR$ method. The pure diastereomeric salt collected from repeated recrystallization was further fractionated by liquid-liquid extraction to the pure enantiomer without racemization. R-(-)-ibuprofen was recovered producing overall yield of 2.4% with the purity more than 99.97%.

• 대한전자공학회논문지
• /
• 제3권2호
• /
• pp.10-17
• /
• 1966

어떤 R-C 분포회로의 징분방정식의 해가 기지일 때 이것을 이용하여 다수의 다른 분포회로의 징분방정식의 해를 구하는 방법이 얻어졌다. 임의의 R-C 분포회로를 제작의 편의상 R(x)C(x)=일정인 회로로 등가변환하는 도해적방법이 얻어졌으며 해석적증명도 가능하다. 또 이론적 취급의 통일과 간단을 위하여 임의의 R-C분포회로를 R(x), C(x) 어느 한쪽이 일정한 분포회로로 등가변환하는 방법이 얻어졌다. 이 후자의 회로와 근사적인 집중정수회로를 생각하므로서 분포회로의 근사적인 해석, 합성이 비교적 간단하게 이루어 질 수 있다. 6x A method by which solutions of the differential equations of any other distributed circuits can be obtained is described when the solution of the differential equation of an R-C distributed amplifier is known. A graphical method of transforming any R-C ditributed circuit into an equivalent circuit which has a constant R(x)-C(x) was also obtained. The theoretical verification of this method is possible. For simplicity, any R-C distributed circuit can be transformed into an equivalent circuit which is a distributed circuit of either constant R(x) or C(x). Using this equivalent circuit and considering a lumped circuit, an approximate analysis and synthesis can be made simply.

• 한국식품영양학회지
• /
• 제32권2호
• /
• pp.148-154
• /
• 2019

The aim of this study was to select compounds for the standardization of fermented Kalopanax pictus Nakai (KP-F), to develop the analysis method using HPLC-PDA and to perform method validation. KP-F is a fermented powder developed to improve the original physiological activities and create a new functionality. Eleutheroside E, Acanthoside B, and Syringaresinol were selected as the standard compounds and developed our own method for simultaneous analysis. The analyte was isolated using C18 column with a gradient elution of 0.05 M phosphoric acid in water and methanol as the mobile phase at a flow rate of 1 mL/min and detected at 210 nm. As a result, all standard compounds showed good linearity with an $R^2$ (coefficient of correlation) of 1.000 and for the limit of detection range of $0.710{\sim}0.831{\mu}g/mL$, and the limit of quantification as $2.150{\sim}2.520{\mu}g/mL$. The precision was RSD (%) of less than 4.80%, while the accuracy was 4.70%>RSD (%) for the range 102.44~110.48%. In conclusion, the developed analysis method is suitable for the detection of Eleutheroside E, Acanthoside B, and Syringaresinol in KP-F.

• Natural Product Sciences
• /
• 제14권4호
• /
• pp.254-259
• /
• 2008

An easy and reliable HPLC method was developed to determine allantoin in Dioscorea Rhizoma using cyano columns. Qualitative and quantitative analyses of allantoin were performed successfully by cyano columns (YMC-Pack CN column, Zorbax SB-CN column and Discovery$^{(R)}$ Cyano column). The intraday precision were 0.58 - 3.33% for YMC-Pack CN, 0.41 - 2.20 for Zorbax SB-CN and 0.45 - 1.93% Discovery$^{(R)}$ Cyano columns, while interday variations were 0.09 - 1.84%, 0.04 - 2.59% and 0.87 - 5.18% for YMC-Pack CN, Zorbax SB-CN and Discovery$^{(R)}$ Cyano columns. The recoveries of allantoin were in the range at 98.8 - 102.6% (RSD 1.1 - 1.6%) for YMC-Pack CN column, 99.7 - 110.5% (RSD 1.3 - 4.9%) for Zorbax SB-CN column, and 97.2 - 110.1% (RSD 1.8 - 5.7%) for Discovery$^{(R)}$ Cyano column. The contents of allantoin in four Dioscorea Rhizoma samples were determined by cyano columms and ranged at 4.1-7.1 mg/g dry weight. The present study indicated that HPLC method using cyano column for determining allantoin is a reliable method and this method can be applied to verify allantoin in Dioscorea Rhizoma.

• 핵의학기술
• /
• 제17권1호
• /
• pp.80-84
• /
• 2013

AFP검사에 있어서 본원은 Immunotech사의 시약을 사용하고 있고 방법은 2 step법(IRMA)이다. 본원 내원환자 31명의 샘플을 대상으로 다소 번거로운 2step법을 1step법으로 간소화 할 수 있는지 비교실험을 하였다. 본법, 변법1(1step 45분), 변법2(1step 60분)의 상관계수와 회귀식, 정밀도, 회수율, 민감도, Hook effect를 확인하였다. 저, 중, 고역가 검체의 측정내 정밀도는 변법1은 3.05%, 3.43%, 1.68% 변법2는 5.00%, 3.69%, 1.97% 측정간 정밀도 는 변법 1은 3.91%, 2.38%, 0.82 % 변법2는 3.14%, 3.71%,1.85% 였다. 분석적민감도는 0.1 IU/mL 였고 직선성은 우수하였다. 상관관계는 각각 y=0.9293x+2.7356 ($R^{2}=0.9999$), y=0.9193x+4.1002 ($R^{2}=0.9993$) 이었다. 2,000 IU/mL 미만에 서는 Hook effect가 나타나지 않았지만 고농도에서는 Hook effect가 나타났다. 이 비교실험을 종합해 보면 본법과 변법1, 변법2 모두 상관관계, 정밀도, 회수율, 민감도 등이 우수함을 알 수 있다. 하지만, 고농도에서 Hook effect가 나타나 완전히 대체해서 사용하기에는 문제가 있다고 사료 된다. 다만, 정상인이 거의 대부분인 건강검진검사에서는 유용하게 사용될 수 있을 것으로 판단된다.