• Journal of Korea Water Resources Association
• /
• v.34 no.5
• /
• pp.499-509
• /
• 2001

2-D transport model based on a discrete probability distribution for a particle displacement was developed too solve advection-diffusion problems in natural stream. In this proposed model, the probabilities expressed as an average and variance function were used to predict the mass transfer between cells in one time step. The proposed model produces solutions without numerical dispersion for constant velocity, diffusion coefficient, and cross-sectional area. When the stability and positivity restrictions were satisfied, the model produced excellent results compared to analytical solutions and other finite difference methods. The proposed model is tested against the dispersion data collected in the Grand River, Canada. The simulation results show that the proposed model can properly describe the two-dimensional mixing phenomena in the natural stream.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.163-167
• /
• 2014

To prove the vibration and speed error problems caused by the nonlinear friction characteristics and load variation of the hydraulic system, a PID speed controller and a load compensation controller for the hydraulic inverter-fed elevator are proposed. The load compensation controller is composed by the PI controller and the speed controller is composed by the PID controller. The P,I and D gains of the control parameters are obtained by the frequency response of system transfer function. The Effectiveness of the proposed controller are shown by experimental results, which the proposed controller yields robustness with load variations and stable and good speed and acceleration responses with less oscillations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.213-218
• /
• 1991

A new model which contains the dynamics of the motor system and the kinematics of the timing belt system is derived for an inverted pendulum system in FAPA Lab. Generalized standard compensator configuration(SCC) which contains the variable design parameters Kl, K2, .., K5 is proposed so that any desired design specification can be achieved. The robust controller which has robust property against the influence of sensor noise, system parameter variation and model uncertainty is designed minimizing the H$_{\infty}$-norm of transfer function from exogenous input to controlled output. The method of solving the two Riccati equations in state space and determining the controller uses on iteration method where the unique stabilizing solution to two algebraic Riccati equation must be positive definite and the spectral radius of their product less than .gamma.$^{2}$. Some cases are derived by varying the design parameter for simulation on a digital computer and experimenting the H$_{\infty}$- controller on an analog computer. The design parameters of controller which satisfies the desired control specification is selected on the basis of the simulation result and experimenting. The reasonableness and validity of the simulation and the robustness of the controller is established.d.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.12
• /
• pp.28-34
• /
• 2011

In this paper, a PLL frequency synthesizer for RSSI applications is designed by phase noise analysis. Required synthesizer performance is achieved by optimizing the noise performance of PLL components and a loop transfer function, since its phase noise, lock time, and spur suppression capability are determined by the performance of loop components and loop filter characteristics. As an application example, a PLL frequency synthesizer for RSSI applications, which operates at the frequency of 2.288GHz, is designed using the phase noise analysis. The validity of the design technique is proved by experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.2
• /
• pp.127-133
• /
• 2015

The error motion of a machine tool spindle directly affects the surface errors of machined parts. Those are usually due to the imperfectness of bearings, stiffness of spindle, assembly errors, external force or unbalance of rotors. The error motions of the spindle have been needed to be decreased to desired goal of spindle's performance. The level of error motion is needed to be estimated during the design and assembly process of the spindle. In this paper, the estimation method for the five degree of freedom (5 D.O.F) error motions for rotary units such as a spindle and rotary table are suggested. To estimate the error motions of the rotary unit, waviness of bearings and external force model were used as input data. The estimation model considers geometric relationship and force equilibrium of the five degree of the freedom motions.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.4
• /
• pp.292-297
• /
• 1993

Aspergillus niger No. PFST-38 was grown on complex media in 30L agitated fermentors at various aeration rates and stirrer speeds. We could correlate the mixing time as a function of the Reynolds number and the apparent viscosity, as follows. ${\theta}_M=2.95\;\NRe^{-0.52},\;{\theta}_M=1.88\;{\eta_a}^{0.57}$ Also, the effects of the apparent viscosity (${\theta}_a$), the impeller rotational speed (N), the air flow rate ($V_s$), and the mixing time (${\theta}_M$) on the oxygen transfer coefficient, $K_L a$ were determined experimentally, and equated as follows. $K_La=12.04N^{0.88}Vs^{0.71}{n_a}^{-0.83},\;K_La=30.2N^{0.88}Vs^{0.71}{\theta_M}^{-1.45}$ $K_La$ increased as the agitation speed and the air flow rate increased. The rate of $K_La$ increase was dependent more on the rotational speed of impeller than on the air flow rate. The glucoamylase production increased with the increase of the agitation speed upto at 500 rpm and increased with the increase of air flow rate upto at 1.0 vvm. The values calculated from the above equation confirmed that the experimental maximum production of glucoamylase was achieved when the $K_La$ and the apparent viscosity of the broth were $260\;hr^{-1}$ and 1800 cps, respectively.

• Journal of Broadcast Engineering
• /
• v.23 no.2
• /
• pp.302-315
• /
• 2018

Highly non-linear electro-optical transfer function of the Perceptual Quantizer was approximated by a truncated Taylor series, resulting in a closed form solution for luma adjustment. This previous solution is fast and quite suitable for the hardware implementation of luma adjustment, but the approximation error becomes relatively large in the range of 600~3,900 cd/m2 linear light. In order to reduce such approximation error, we propose a new linear model, for which a correction is performed on the position and the slope of line based on the scope of approximation. In order to verify the approximation capability of the proposed linear model, a comparative study on the luma adjustment schemes was conducted using various high dynamic range test video sequences. Via the comparative study, we identified a significant performance enhancement over the previous fast luma adjustment scheme, where a 4.65dB of adjusted luma t-PSNR gain was obtained for a test sequence having a large portion of saturated color pixels.

• Journal of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.273-281
• /
• 1986

This study is focused on the correct measurement of the equations for the determination of the impedance parameters-the differential capacity of the double layer $C_d$, solution resistance $R_Q$, transfer resitance $R_i$, and adsorption pseudcapacity $C_{\phi}$/ The application of only an imaginary part of complex function of ${\omega}$ at the sinusoidal steady state indicates the following equations of total impedance: at low frequency $|Z_{LF}|=1/{\omega}_1\;C_{\phi}\;{\sqrt{1+{{\omega}_1}^2/{\omega}^2}$, at high frequency $|Z_{HF}|={\omega}_2/({\omega}_1{\omega}_3C{\phi})({\omega}^2+{{\omega}_2}^2)\;{\sqrt{{({\omega}^2+{\omega}_2{\omega}_3)}^2+{({\omega}_2{\omega}-{\omega_3{\omega})^2}}$. The values of the total impedance of cell, phase angle, and cell current that are necessary for the calculations of impedance parameters were experimentally measured from 200 to 6000Hz for the following supporting electrolytes, 0.5M $Na_2SO_4$, 1M NaCl, 19.373% sea water, 1M HCl, 1M $KNO_3$ and for $10^{-2}M$ KI and 60mM DBNA (Di-iso-Butylnitrosoamine) in these supporting electrolytes. The derived equations in this study shows that the values of impedance parameters of $C_d,\;C_{\phi},\;R_i\;and\;R_Q\;are\;15{\sim}40\;{\mu}F/cm^2,\;162{\sim}758\;{\mu}F/cm^2\;11.5{\sim}57.6\;ohm{\cdot}cm^2\;and\;0.5{\times}10^{-2}{\sim}4.1{\times}10^{-2}\;ohm{\cdot}cm^2$ respectively.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.5825-5831
• /
• 2013

Background/Objectives: Maintenance of cellular function in culture is vital for transfer and development following adoptive immunotherapy. Dual properties of IL-21 in activating T cells and reducing activation induced cell death led us to explore the mechanism of action of IL-21 enhanced proliferation and cytotoxic potential of CIK cells. Method: CIK cells cultured from PBMCs of healthy subjects were stimulated with IL-21 and cellular viability and cytotoxicity to K562 cells were measured. To elucidate the mechanism of action of IL-21, mRNA expression of cytotoxic factors was assessed by RT-PCR and protein expression of significantly important cytotoxic factors and cytokine secretion were determined through flow cytometry and ELISA. Western blotting was performed to check the involvement of the JAK/STAT pathway following stimulation. Results: We found that IL-21 did not enhance in vitro proliferation of CIK cells, but did increase the number of cells expressing the CD3+/CD56+ phenotype. Cytotoxic potential was increased with corresponding increase in perforin ($0.9831{\pm}0.1265$ to $0.7592{\pm}0.1457$), granzyme B ($0.4084{\pm}0.1589$ to $0.7319{\pm}0.1639$) and FasL ($0.4015{\pm}0.2842$ to $0.7381{\pm}0.2568$). Interferon gamma and TNF-alpha were noted to increase ($25.8{\pm}6.1ng/L$ to $56.0{\pm}2.3ng/L$; and $5.64{\pm}0.61{\mu}g/L$ to $15.14{\pm}0.93{\mu}g/L$, respectively) while no significant differences were observed in the expression of granzyme A, TNF-alpha and NKG2D, and NKG2D. We further affirmed that IL-21 signals through the STAT-3 and STAT-5b signaling pathway in the CIK cell pool. Conclusion: IL-21 enhances cytotoxic potential of CIK cells through increasing expression of perforin, granzyme B, IFN-gamma and TNF-alpha. The effect is brought about by the activation of STAT-3 and STAT-5b proteins.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.203-209
• /
• 2013

Digital Radiography (DR) has improved a quality of resolution based on a wide dynamic range, high detective quantum efficiency (DQE), and modulation transfer function (MTF), compared with film/screen(F/s). Unlike expectation that a low level of radiation can be used in examination, high level of signal to noise ratio(SNR) due to over-exposure caused increase of exposed dose to patients. Also, the auto exposure control (AEC) using Kilovolage(kVp) in F/S can cause over-exposure. Hence, in this study, we proposed a proper method for using DR, in which effect of tubing Kilovolage on device's image, DR MTF measurement with changes of tubing current (mA), and the quantitative evaluation of skull phantom captured images' PSNR were evaluated. Changes of contrast with tubing Kilovolage can be improved by retouching, and MTF changes according to tubing current(1.41~1.39 lp/mm in 50% area, and 3.19~2.8 lp/mm in 10% area) does not influence on resolution of image. As a result, high tubing Kilovoltage, and tubing current will be suitable to use of DR.