• Journal of Technology Innovation
• /
• v.6 no.2
• /
• pp.208-237
• /
• 1998

We are faced with the crisis of the R&D investment because of the effects of the IMF conditions. Most of the laboratories are going to restructure by the cutting off of money, man power and the reduction of R&D theme. Therefore it is necessary to allocate the R&D resources effectively to R&D projects. The evaluation and the selection of R&D projects have been recognized as the most important process for the allocation of the R&D resources. The result of the KITA(1997) shows that the commercial success rate of the R&D from new-product brain storming is only 5.8%. This study aims to analyze the actual conditions of the cost benefit analysis(CBA) of R&D projects of selected laboratories and to study measure methods of the R&D benefits. The research method of this study reviews the CBA of R&D firstly, and surveys 200 selected high ranking labs of R＆D expenditures. For the comparison of the results between '87 and '97, this survey used the same questionary for each year. As the result of the survey only 27 labs(response rate 13.5%) responded. The result of the '97 survey is as follows : The CBA is used by 44% of responding labs. The economic evaluation method for the R&D project selection is used by 48% of labs and this numbers increased by over 10 percents points compared with the result of '87. The CBA is used for about 40% about each of the budget preparing and the budget analysis, and by 30% of labs to analyze sales and expenditures of the overall period of the project. As the measurement of benefits of R&D projects, 30% of labs responded that it is impossible to measure the benefits, and 20% of labs measured the benefits between sales and expenditures of R&D projects.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.267-272
• /
• 2007

Uiseong subbasin belonging to Kyungsang basin resulted from volcanic activity in the late Cretaceous. In this study, we carry out MT and gravity survey at the Hwasan caldera, which was formed of volcanic and abyssal rocks complex, then analyze and identify geological substructure. Potential survey such as gravity and magnetic survey has been mainly carried out in former studies, so depth information for understanding substructure was not enough. To complement a potential survey, we use MT method, which has high vertical resolution. Moreover we make a simple 2D model comparing with former study. The result of MT and gravity 2D modeling shows that this area is roughly composed of 3 layers; The bottom layer is a basement. In the second layer, intrusive rocks having high resistivity is placed along the ring faults and the sedimentary layer of low resistivity is inside caldera. The highest layer is alluvium. To comprehend the 3D structure of the Hwasan caldera, we perform 3D gravity inversion, and construct the 3D model from the result of 3D gravity inversion. MT responses are calculated by using the constructed 3D model and the 3D model of the Hwasan caldera's structure is suggested after comparing the calculated values with the observed values at MT line.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.187-194
• /
• 2005

A PC-based 8-channel seismic system has been developed and applied for bedrock mapping in near shore environment. The system is composed of an analog signal processor and an A/D converter installed on the computer, and a streamer with the group interval of 5 meters. The system is accomplished with a data acquisition program which controls the system and a data processing software. With the PC-based shallow marine seismic survey system high-resolution 2-D marine seismic profiles which have high S/N ratios can be obtained after appropriate data processing.

• Geophysics and Geophysical Exploration
• /
• v.4 no.4
• /
• pp.124-132
• /
• 2001

Electrical resistivity survey has been conducted for delineating geological fault structure in Kaekok-ri near Kyungju. In general, electrical resistivity survey has an advantage of searching buried faults and its traces compared with other geophysical survey methods. Distribution of electrical conductivity in the ground is influenced by the ratio of pores, groundwater and clay minerals. These properties are evidenced indirectly to explain for weathering condition, faults and fracture Bones. Thus the electrical resistivity survey can be an effective method to find buried faults. We have carried out two dimensional (2-D) interpretation by means of smoothness-constrained least-squares and finite element method. Field data used in this paper was acquired at Kaekok-ri, Wuedong-eup, Kyungju-si, where is Ulsan Fault and is close to the region in which debatable quaternary fault traces were found recently. The dipole-dipole array resistivity survey which could show the 2-D subsurface electrical resistivity structure, was carried out in the area with three lines. The results showed good property of fault, fracture zone and fault traces which we estimated were congruous with the results. Through this study, 2-D electrical resistivity survey interpretation for fault is useful to apply.

• STI Policy Review
• /
• v.1 no.3
• /
• pp.53-68
• /
• 2010

This paper empirically evaluates the effects of regional and industrial R&D on the performances of individual firms in two separated stages: (1) the stage of technological outcome from R&D and (2) the stage of economic outcome from technological outcome. Technological spillovers are separated from negative congestion effects through the stage-specific estimation. The firm-level Korean Innovation Survey data merit in coping with the endogeneity problem inherent in the estimation of spillovers. The estimation results show that: (1) there exist significant R&D spillovers both in regional and industrial dimensions, (2) the hypothesized technological spillovers and economic congestion effects are both in effect, and (3) firms with smaller individual R&D investments show greater spillovers.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.199-206
• /
• 2000

The grout-effect evaluation of the ground reinforcement technique, which has been widely applied to civil engineering and construction fields, is not established for the guidelines of choosing the efficient evaluation method, and in fact the experts have little effort to determine the reinforcement effect quantitatively. The evaluation of the grout was carried out by experiments on core specimen and drilling, which is impossible to evaluate grout-reinforcement effect quantitatively. This paper presents an example on verification of FRP grout-effect using geophysical prospecting on ground surface, which is 2D resistivity survey that easily visualize survey results with color graphics and seismic refraction method that interprets the subsurface seismic velocity structure.

• Tunnel and Underground Space
• /
• v.13 no.4
• /
• pp.279-286
• /
• 2003

Many trials to set up the correlation between the rock mass classification and the earth resistivity have been carried out to design tunnel support type based on the interpreted electrical resistivity acquired by surface electrical survey. But it is hard to find reports on the comparison of the real rock support type determined during the excavation with the electrical resistivity by the inversion of the survey data acquired before the tunneling. In this study, the rock mass classification based on the face mapping data and the resistivity inversion data are investigated to see if it is possible to design reliably the rock support type based on the surface electrical survey. To get the quantitative correlation, rock engineering indices such as RCR(rock condition rating), N(Rock mass number), Q-system and RMR(rock mass rating) are calculated. Since resistivity data has low resolution, Kriging method as a post processing technique which minimizes the estimated variance is used to improve resolution. The result of correlation analysis shows that the 2D electrical resistivity survey is appropriate to see the general trend of the geology in the sense of rock type, though there might be some local area where these two factors do not coincide. But the correlation between the result of 3D survey and the rock mass classification turns out to be very high, and then 3D electrical resistivity survey can make it possible to set up more reliable rock support type.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.2
• /
• pp.33-40
• /
• 2014

At present, Cadastral map of 2 dimensional is in the stream of changing it to 3 dimensional type supported by GPS and laser techniques. In addition, this steam can be explained at the same time with improvement of equipment of storing much information, support of equipment for imaginative 3D spatial information, and support of equipment of expressing land in 3D Cadastral. This study suggest to apply airborne lidar survey technique on cadastral map to acquire comparably and quickly detailed height of ground. For doing this, this study checked out credibility regarding accuracy of airborne lider survey. After choosing research area, this study has done the airborne lidar survey and acquire the result after surveying Cadastral Comparison Point to check out the accuracy of acquired results. In addition, this study check out the result of Cadastral Comparison Point and airborne lidar survey applied by paired sample t-test based on actual results. The result is that test statistics is 0.322 which is 5 % similar level and null hypothesis cannot be rejected, so this study found out that result of both survey ways are the same. Therefore, the result of airborne lidar survey can be utilized to build up 3D Cadastral information hereafter.

• Geophysics and Geophysical Exploration
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2001

The application of geophysical survey methods need to be integrated to meet the increasing demands of imaging of the subsurface in the practical application of civil engineering, underground water survey and environmental problems. This paper examines the IP survey which can be surveyed simultaneously with DC resistivity survey. In this study, 3-D IP modeling algorithm was developed. The 3-D IP modeling algorithm was based on 3-D resistivity modeling by finite-element method. The result of 3-D modeling was compared with 2-dimensional modeling result. The result showed that the 3-D modeling algorithm developed in this study was accurate. Finally, the 3-D modeling algorithm developed in this paper will be useful for the study of IP data.

• Journal of Preventive Medicine and Public Health
• /
• v.6 no.1
• /
• pp.133-160
• /
• 1973

1. Introduction Community medicine with the concept of comprehensive medical care and an ideal medical care delivery system not only for an individual or family but for the whole community has emerged. In April 1970, the Presbyterian Medical Center started a hospital based community health service project in order to improve the health of the people in rural areas. Prior to commencing a comprehensive medical care system, a family survey was needed. The major objective of this survey was to obtain information concerning the people and their environment so as to be able to plan and implement a comprehensive medical care program in Soyang-Myun. 2. Survey Method An interview using a family record form was carried out for each household. This family record form was designed to get information about demography, family planning, environmental sanitation and vital statistics. Prior to beginning, the members of the survey team were trained in interviewing techniques for three days. The team consisted of a public health nurse, four nurse-aides, a sanitarian and four health extension workers who are working in our project, The survey was carried out during the period November 1971 to March 1972. 3. Project area 1) Population of Soyang-Myun was 11,668; male, 5,962 and female, 5,706. Sex ratio: 104.5. 2) Households : 1,858 3) Family size: The average household consisted of 6.3 persons. 4) Educational level of householder a. Illiterate 13% b. No schooling but able to read 10% c. Preschool children 19% d. Primary school 47% e. Middle school 7% f. High school 3% g. College or University 1% 5) Occupational distribution of householders a. Farmer 67% b. Laborer 13% c. Office worker 4% d. Merchant 4% e. Industrial worker 2% f. Unemployed 8% g. Miscellaneous 2% 6) Religious affiliation a. No religion 74% b. Buddhist 12% c. Protestant 10% d. Catholic 4% 4. Survey results Living Environment : a. Home ownership 95% b. Kinds of roofing Straw-thatched house 84% Tile-roofed house 10% Slate-roofed house 5% Other 1% c. Floor space Less than 6 pyong 10% 6-10 pyong 53% 11-15 pyong 24% 16-20 pyong 9% More than 20 pyong 4% d. Radio ownership 80% Environmental Sanitation : a. the source of drinking water public well 49% private well 30% drainage water 9% steam water 8% well pump 3% water distribution system 1% b. Distance between well and toilet more than 16meters 38% 6-10 meter 31% 11-15 meters 14% Less than 6 meters 17% c. The status of well management Bad 72% Fair 26% Good 2% d. General sanitary state of house Bad 37% Fair 51% Good 12% e. House drainage system had no house drainage. 77% Family Planning : a. 24% of the people have used contraceptives, but 12% ceased to use them. 76% have never used contraceptives. b. used methods 1oop 68% oral pill 16% vasectomy 4% condom 1% tubal ligation 1% two or more methods 10% Maternal Health : a. The number of conceptions of housewives under 50 years of age. 11 times 26% 6 times 11% 5 times 11% 4 times 9% b. The place of delivery own house 88% hospital 1% others 11% Treatment of general sickness : a. The place of treatment Soyang Health Center 31% Hospital (private or otherwise) 26% Pharmacy 14% Herb medicine 5% Private care 5% No treatment 12% Miscellaneous 7% b. Usual causes of diseases Unknown 46% Tuberculosis 29% Neuralgia 8% CVA 3% Bronchitis 3% Others 11%