• The Korean Journal of Nuclear Medicine
• /
• v.38 no.4
• /
• pp.318-324
• /
• 2004

Purpose: Philips GEMINI is a newly introduced whole-body GSO PET/CT scanner. In this study, performance of the scanner including spatial resolution, sensitivity, scatter fraction, noise equivalent count ratio (NECR) was measured utilizing NEMA NU2-2001 standard protocol and compared with performance of LSO, BGO crystal scanner. Methods: GEMINI is composed of the Philips ALLEGRO PET and MX8000 D multi-slice CT scanners. The PET scanner has 28 detector segments which have an array of 29 by 22 GSO crystals ($4{\times}6{\times}20$ mm), covering axial FOV of 18 cm. PET data to measure spatial resolution, sensitivity, scatter fraction, and NECR were acquired in 3D mode according to the NEMA NU2 protocols (coincidence window: 8 ns, energy window: $409[\sim}664$ keV). For the measurement of spatial resolution, images were reconstructed with FBP using ramp filter and an iterative reconstruction algorithm, 3D RAMLA. Data for sensitivity measurement were acquired using NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves after we confirmed that dead time loss did not exceed 1%. To measure NECR and scatter fraction, 1110 MBq of F-18 solution was injected into a NEMA scatter phantom with a length of 70 cm and dynamic scan with 20-min frame duration was acquired for 7 half-lives. Oblique sinograms were collapsed into transaxial slices using single slice rebinning method, and true to background (scatter+random) ratio for each slice and frame was estimated. Scatter fraction was determined by averaging the true to background ratio of last 3 frames in which the dead time loss was below 1%. Results: Transverse and axial resolutions at 1cm radius were (1) 5.3 and 6.5 mm (FBP), (2) 5.1 and 5.9 mm (3D RAMLA). Transverse radial, transverse tangential, and axial resolution at 10 cm were (1) 5.7, 5.7, and 7.0 mm (FBP), (2) 5.4, 5.4, and 6.4 mm (3D RAMLA). Attenuation free values of sensitivity were 3,620 counts/sec/MBq at the center of transaxial FOV and 4,324 counts/sec/MBq at 10 cm offset from the center. Scatter fraction was 40.6%, and peak true count rate and NECR were 88.9 kcps @ 12.9 kBq/mL and 34.3 kcps @ 8.84 kBq/mL. These characteristics are better than that of ECAT EXACT PET scanner with BGO crystal. Conclusion: The results of this field test demonstrate high resolution, sensitivity and count rate performance of the 3D PET/CT scanner with GSO crystal. The data provided here will be useful for the comparative study with other 3D PET/CT scanners using BGO or LSO crystals.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.33-42
• /
• 2008

The purpose of this study was to analyze kinematic variables during Side kick motion in Taekwon Aerobics. The subjects of this study were the 7 skilled and 7 unskilled female college students. A QTM and an Auto Track were used to acquire raw data. The sampling rates camera was 100 Hz. The parameters were calculated and analyzed with Visual3D and SPSS 12.0. The results were as following; 1. In the elapsed time, there was no significance difference statically between a skilled and unskilled group. 2. In the cases of knee angle, there was significant difference statically at Maximum Knee Flexion2(p=0.046, F=4.925). 3. In the cases of knee angular velocity, there was significant difference statically at Maximum Knee Flexion1(p=0.031, F=5.940). 4. In the flexion/extension of hip angle, there was significant difference statically at Maximum Knee Flexion2(p=0.012, F=8.668). 5. In the abduction/adduction of hip angular velocity, there was significant difference statically at Minimum Knee Flexion (p=0.019, F=7.324). 6. In the external rotation/internal rotation of hip angular velocity, there was significant difference statically Minimum Knee Flexion(p=0.005, F=11.87).

• The KIPS Transactions:PartD
• /
• v.12D no.2 s.98
• /
• pp.309-318
• /
• 2005

In order to present wireless Internet users with previously created HTML contents and applications, it is essential to research and develop the technology to efficiently convert HTML documents into documents and further provide a way to edit the WML documents. This paper describes the design and development of a WML converter and WML editor The WML converter can convert HTML pages in real time into WML documents that are suitable for the WAP environment. The WML editor enables creation and modification of WML documents in a WYSIWYG fashion. These tools enable the previous services based on HTML documents to be easily adapted to the wireless environment. The developed WML converter can be installed on a proxy server to support real time conversion of Web contents. It is superior to other converters in terms of the various image formats it supports and the improvements on the conversion of the link and frame tags. Users can continuously browse via links and also view frames. Automatic dividing of large WML documents into WML cards md user defined conversion rules are also supported. The WML editor is also integrated with the converter and provides an integrated WYSIWYG environment for creating, converting and publishing WML documents.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.4
• /
• pp.1-10
• /
• 2011

This study investigates the performance of composite (steel-concrete) frame structures through numerical experiments on individual connections. The innovative aspects of this research are in the use of connections between steel beams and concrete-filled tube (CFT)columns that utilize a combination of low-carbon steel and shape memory alloy (SMA) components. In these new connections, the intent is to utilize the recentering provided by super-elastic shape memory alloy tension bars to reduce building damage and residual drift after a major earthquake. The low-carbon steel components provide excellent energy dissipation. The analysis and design of these structures is complicated because the connections cannot be modeled as being simply pins or full fixity ones they are partial restraint (PR). A refined finite element (FE) model with sophisticated three dimensional (3D) solid elements was developed to conduct numerical experiments on PR-CFT joints to obtain the global behavior of the connection. Based on behavioral information obtained from these FE tests, simplified connection models were formulated by using joint elements with spring components. The behavior of entire frames under cyclic loads was conducted and compared with the monotonic behavior obtained from the 3D FE simulations. Good agreement was found between the simple and sophisticated models, verifying the robustness of the approach.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.135.2-136
• /
• 2003

To characterize plasmids in Xanthomonu axonopodis pv. glycines, we isolated plasmids pAG1 from the strain AG1 and pXAG81 and PXAG82 from the strain Bra, respectively, and sequenced three plasmids. The size of plasmids, pAG1, pXAG81, and pXAG82 was 15,149-base pairs (bp), 26,727-bp, and 1,496-bp, respectively Fifteen and twenty six possible open reading frames (ORFs) were present in pAG1 and pXAG81, respectively. Only one ORF homologous to a rep gene of Xylella fastidiosa was present in pXAG82. pAG1 contained genes homologous to avrBs3, tnpA, tnpR, repA, htrA, three parA genes, M.XmaI, R.XmaI, and six hypothetical proteins. pXAG81 contained genes homologous to avrBs3, tnpA, tnpR, repA, htrA, two parA genes, pemI, pemK, mobA, mobB, mobC, mobD, mobE, trwB, traF, traH, ISxac2, and eleven hypothetical proteins. Based on DNA sequence analysis, we presume that pXAG81 is a conjugal plasmid. Interestingly, we found 0.5-kb truncated avirulence gene similar to aurXacE3 on the right border of avrBs3 homolgs of pAG1 and pXAG81. Two hundred twenty five isolates were analyzed to find aurBS3 or tra gene homologs by Southern hybridization. The numbers of avrBs3 homolog varied from 3 in AG1 to 8 in AG166. Two hundred seventeen isolates appeared to can conjugative plasmids (pXAG81 type), and thirty eight isolates appeared to carry non-conjugative plamids (pAGl type). This indicated that aurBs3 gene homologs might be spread by conjugation in X. axonopodis pv. glycines.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.280-283
• /
• 2007

The first grid-connected, building-integrated transparent amorphous silicon photovoltaic installation has been operated since October 2004 in Yongin, Korea. The 2.2kWp transparent PV system was applied to the facade of entrance hall in newly constructed KOLON E&C R&D building. The PV module is a nominal 0.98m ${\times}$ 0.95m, 10% transparent, laminated, amorphous(a-Si) thin-film device rated at 44 Wp per module. To demonstrate the architectural features of thin film PV technologies for daylighting application, transparent PV modules are attached to the building envelope with the form of single glazed window and special point glazing(SPG) frames. Besides power generation, the 10% transmittance of a-Si PV module provides very smooth natural daylight to the entrance hall without any special shading devices for whole year. The installation is fully instrumented and is continuously monitored in order to allow the performance assessment of amorphous silicon PV operating at the prevailing conditions. This paper presents measured power performance data from the first 12 months of operation. For the first year, annual average system specific yield was just 486.4kWh/kWp/year which is almost half of typical amorphous silicon PV output under the best angle and orientation. It should be caused by building orientation and self-shading of adjacent mass. Besides annual power output, various statistical analysis was performed to identify the characteristics of transparent thin film PV system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2C
• /
• pp.166-174
• /
• 2006

In this paper, a new stereo object tracking system using the disparity motion vector is proposed. In the proposed method, the time-sequential disparity motion vector can be estimated from the disparity vectors which are extracted from the sequence of the stereo input image pair and then using these disparity motion vectors, the area where the target object is located and its location coordinate are detected from the input stereo image. Being based on this location data of the target object, the pan/tilt embedded in the stereo camera system can be controlled and as a result, stereo tracking of the target object can be possible. From some experiments with the 2 frames of the stereo image pairs having 256$\times$256 pixels, it is shown that the proposed stereo tracking system can adaptively track the target object with a low error ratio of about 3.05$\%$ on average between the detected and actual location coordinates of the target object.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.79-88
• /
• 2011

In this paper, We propose real-time sound editing and playback systems which is based on Augmented Reality. The proposed system are composed with music maker which is based on AR maker and music board. By using music marker's contents, the proposed system selects the kinds of musical instruments and pre-defined midi track and by calculating the relative location of music marker on 2-dimensional plane, we set the spatial relative parameter in midi track. For performance evaluation, we check the jitter value of in various resolutions by using CAM which supports $1600{\pm}1200$ as the maximum resolution. As a result, when we set the configuration value of CAM as $860{\pm}600$ pixels and process two frames per minute, the success ratio of recognizing music markers and jitter values are accegnable. It can be utilized in the fields of alternative cmacine which is based on music and also be utilized in the educational aspects because child or elderly who don't know enough musical theory can easily handle it.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.139-149
• /
• 2006

This study is to analyze the kinematic variables of inward $1{\frac{1}{2}}$ somersault in platform diver. For the manner, 3 people form the national diving team in the year 2000were chosen as the subjects and two S-VHS video cameras set in 60frames/sec were used for recording their motions. Coordinated raw positions data through digitizing are smoothing by butter-worth's low-pass filterin method at a cut off frequency 6.0Hz. and the direct linear transformation(DLT) method was employed to obtain 3-D position coordinates. The conclusions were as follows. However, horizontal distance which is the change of the COG, form the point of the jump to the point of Event 3 where the player is out of the board range completely, Subject B showed 105.1cm and 71.1cm of the vertical distance which are shorter horizontal distance and higher vertical distance, thus, took a great advantage of the position to prepare for the entry. Therefore, if a player takes higher position by speeding up the vertical velocity at the moment of the jumping off the board, and stays in the air longer, the player can have more time to show his skill. Because of the use of the characteristics of the inward somersault, keeping the safe distance form the board is important but in order to higher the completeness, it is ideal to keep the horizontal distance little over 100cm. Also, the angles of shoulder and elbow from Event 1 to 4, depending on swing of the arms, motions in the air, getting ready for the entry, showed some difference individual by individual, according to the velocity of the thigh and shank showed much difference while getting ready and take-off, and it's because of the individual's different bending and straightening for horizontal and vertical distance.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.73-83
• /
• 2007

In this paper, we propose macroblock(MB)-based adaptive interpolation filter method for improving coding efficiency in H.264/AVC. In the proposed method, nine separable two-dimensional(2D) interpolation filters are applied for precisely compensating motions in various directions. The optimal cost function which considers the bit rate and distortion for coding the MB is defined. The filter is adaptively selected per MB for minimizing the defined cost function. In the experimental results, the proposed method shows more excellent in coding efficiency than the conventional methods for the various standard $QCIF(176{\times}144)/CIF(352{\times}288)$ video test sequences. It leads to about 6.25%(1 reference frame) and 3.46%(5 reference frames) bit rate reduction on average compared to the H.264/AVC.