• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.78-84
• /
• 2009

In general video coding systems, motion estimation (ME) is regarded as a vital component in a video coder as it consumes a large amount of computation resources. Fractional pixel motion estimation can improve the video compression rate at the cost of higher computational complexity. It is based on the experimental results that the sum of absolute differences (SAD) shows parabolic shape and thus can be approximated by using interpolation technique. In this paper, we propose a fast fractional pixel search algorithm by combining SASR (Simplified Adaptive Search Range) and the CBCDS (Center Biased Cross-Diamond Search) pattern with the predicted motion vector. Compare with the fractional pel full search and the CBFPS, the proposed CBCDS algorithms can reduce fractional pel search points up to 81.4%, respectively with the PSNR lost about 0.05dB.

• Journal of Communications and Networks
• /
• v.16 no.5
• /
• pp.548-558
• /
• 2014

Load distribution is vital to the performance of multipath transport. The task becomes more challenging in real-time multimedia applications (RTMA), which impose stringent delay requirements. Two key issues to be addressed are: 1) How to minimize end-to-end delay and 2) how to alleviate packet reordering that incurs additional recovery time at the receiver. In this paper, we propose sub-packet based multipath load distribution (SPMLD), a new model that splits traffic at the granularity of sub-packet. Our SPMLD model aims to minimize total packet delay by effectively aggregating multiple parallel paths as a single virtual path. First, we formulate the packet splitting over multiple paths as a constrained optimization problem and derive its solution based on progressive approximation method. Second, in the solution, we analyze queuing delay by introducing D/M/1 model and obtain the expression of dynamic packet splitting ratio for each path. Third, in order to describe SPMLD's scheduling policy, we propose two distributed algorithms respectively implemented in the source and destination nodes. We evaluate the performance of SPMLD through extensive simulations in QualNet using real-time H.264 video streaming. Experimental results demonstrate that: SPMLD outperforms previous flow and packet based load distribution models in terms of video peak signal-to-noise ratio, total packet delay, end-to-end delay, and risk of packet reordering. Besides, SPMLD's extra overhead is tiny compared to the input video streaming.

• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.2-9
• /
• 2002

Recently. VR( Virtual Reality) applications such as virtual studio and virtual character are wifely used In TV programs. and AR( Augmented Reality) applications are also belong taken an interest increasingly. This paper introduces a virtual screen system. which Is a new AR application for broadcasting. The virtual screen system is a real-time video augmentation system by tracking a chroma-patterned moving panel. We haute recently developed a virtual screen system.'K-vision'. Our system enables the user to hold and morse a simple panel on which live video, pictures of 3D graphics images can appear. All the Images seen on the panel change In the correct perspective, according to movements of the camera and the user holding the panel, in real-time. For the purpose of tracking janet. we use some computer vision techniques such as blob analysis and feature tracking. K-vision can work well with any type of camera. requiring no special add-ons. And no need for sensor attachments to the panel. no calibration procedures required. We are using K-vision in some TV programs such as election. documentary and entertainment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2011

In this paper, an 1.5Gbit/s wireless data transmission system using the carrier frequency of 300 GHz band was implemented. The RF front-end was composed of schottky diode sub-harmonic mixer, frequency tripler, and horn antennas for transmitter and receiver, respectively. The LO frequencies of sub-harmonic mixer are 150GHz for transmit chain and 156GHz for receive chain. The ASK(Amplitude Shift Keying) modulation was used in the transmitter and the envelope detection method was used in the heterodyne receiver. The conversion loss of sub-harmonic mixer and implementation system loss were measured to be 9.8dB and 1.2dB, respectively. The 1.5Gbit/s video signal with HD-SDI format was transmitted over wireless distance of 40cm without optical lens(4.2m with optical lens) and displayed on HDTV at the transmitted average output power of $20{\mu}W$.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.75-80
• /
• 2013

In this paper, the Ka-band maritime satellite communication systems for mobile terminals are proposed. The design includes the link budget analysis, determination of modulation and coding schemes and the overall structure of a transmitter. To avoid the harmful effects on the existing DVB-S2 services, the proposed maritime satellite system using the same spectrum with DVB-S2 at the same time employs the very wideband spreading transmission. Additionally, omni-directional low-gain antennas should be equipped in a mobile terminal to reduce the system cost. These two considerations limit the maximum transmission rate of the proposed system. Due to the limitations, the proposed system includes 36 dB or 39 dB spreading gain depending on the modulation scheme and a link-adaptive repetition method depending on the level of rain attenuation. To support short packets with minimal performance loss, the turbo code used in 3GPP instead of LDPC(low density parity check code) is adopted. By combining them, the overall structure of low-rate maritime satellite communication system is designed.

• The Journal of the Korea Contents Association
• /
• v.9 no.4
• /
• pp.27-33
• /
• 2009

Selection of the Lagrangian multiplier is a key factor to determine the performance of Rate-Distortion Optimization (RDO) in video coding. JM, reference S/W of H.264, employs only one RDO model for all macroblock. However, since the characteristics of macroblocks are different, RDO model adaptive to their characteristics can give some performance improvement. In this paper, we propose an RDO algorithm adaptive to characteristics of macroblocks. We empirically obtain the optimal Lagrangian multipliers considering characteristics of macroblocks. For performance evaluation, the proposed method is applied to JM10.2 and, as a result, we have PSNR gain of 0.2dB on average.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.552-560
• /
• 2017

This paper presents a transceiver chipset realized in a $0.13-{\mu}m$ CMOS technology for serial digital interface of video data transmission, which compensates the electrical cable loss of 45 dB in maximum at 1.5 Gbps. For the purpose, the TX equips pre-emphasis in the main driver by utilizing a D-FF with clocks generated from a wide-range tuning PLL. In RX, two-stage continuous-time linear equalizers and a limiting amplifier are exploited as a front-end followed by a 1/8-rate CDR to retime the data with inherent 1:8 demultiplexing function. Measured results demonstrate data recovery from 270 Mbps to 1.5 Gbps. The TX consumes 104 mW from 1.2/3.3-V supplies and occupies the area of $1.485mm^2$, whereas the RX dissipate 133 mW from a 1.2-V supply and occupies the area of $1.44mm^2$.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.119-128
• /
• 2013

This paper proposes and implements an core transform architecture, which is one of the major processes in HEVC video compression standard. The proposed core transform architecture is implemented with only adders and shifters instead of area-consuming multipliers. Shifters in the proposed core transform architecture are implemented in wires and multiplexers, which significantly reduces chip area. Also, it can process from $4{\times}4$ to $16{\times}16$ blocks with common hardware by reusing processing elements. Designed core transform architecture in 0.13um technology can process a $16{\times}16$ block with 2-D transform in 130 cycles, and its gate count is 101,015 gates.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.221-231
• /
• 2001

In this paper, we propose an efficient requantization method for INTRA frames in heterogeneous transcoding from MPEG-1 to MPEG-4 simple profile. The quantizer for MPEG-1 INTRA MB usually uses a quantization weighting matrix while the quantizer for MPEG-4 simple profile doesn't. As a result, the quantization step sizes of the two quantizers may not be the same even for the same quantization parameter. Due to this mismatch in the quantization step site, the transcoded MPEG-4 sequence suffers from serious quality degradation and the number of bits produced by transcoding increases from the original MPEG-1 video sequence. To solve these problems, we propose an efficient method to find a near-optimum reconstruction level in the transcoder. We also present a PDF (probability distribution function) estimation method for the original DCT coefficients of MPEG-1 video sequence, which is required for the proposed requantization. Experimental results show that the proposed method gives $0.3{\sim}0.6dB$ improvement in PSNR over the conventional method, even at the reduced bit-rate about $5{\sim}7%$ from the conventional method.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.3
• /
• pp.20-31
• /
• 2008

In this paper, we propose a single view-based technique for the estimation of human height and position. Conventional techniques for the estimation of 3D geometric information are based on the estimation of geometric cues such as vanishing point and vanishing line. The proposed technique, however, back-projects the image of moving object directly, and estimates the position and the height of the object in 3D space where its coordinate system is designated by a marker. Then, geometric errors are corrected by using geometric constraints provided by the marker. Unlike most of the conventional techniques, the proposed method offers a framework for simultaneous acquisition of height and position of an individual resident in the image. The accuracy and the robustness of our technique is verified on the experimental results of several real video sequences from outdoor environments.