• 한국시스템다이내믹스연구
• /
• 제15권2호
• /
• pp.27-50
• /
• 2014

Korea government established the energy technology development plan (2011-2020) and declared to be a leader of the green energy technologies. The plan aims for 10% market share in the green energy industry, 12% energy efficiency improvement, and 15% greenhouse gas reduction. In order to achieve these goals, the government has tried to calculate the whole scale of national energy R&D investment, annual budget and specific expenditures for new technologies by computer simulation. The simulation modules include the R&D investment model, GDP model, energy consumption and $CO_2$ emission model by System Dynamics. Based on these simulation modules, I tested various scenarios for effectiveness of energy R&D investments until 2020. The results show that Korea should increase national energy R&D investment to 2.3 billion U.S. dollars, and switch the investment from electricity and nuclear power to the renewable energy.

• 한국생활과학회지
• /
• 제21권2호
• /
• pp.299-314
• /
• 2012

The purpose of this study was to explore effects of pattern alteration using a virtual clothing simulation approach in combination with 3D analysis software. Three raglan sleeves of different patterns were worn by an avatar using virtual clothing simulation with silk and cotton as the test fabrics. It was observed that the silhouette and hemline shape were affected differently based on raglan sleeve pattern and fabric type. By examining clothing pressure distribution, the cotton fabric designs and pattern shapes provided for a variety of influences on armhole and bust regions as well as the back sleeve area. For representative locations, cross section circumstance, cross section area, and volume were measured by using 3D analysis and the resulting correlation between the 2D and 3D data were investigated. Among different fabrics, there was little difference between the 2D and 3D clothing surface area. However, when using 3D analysis, clothing volume was significantly affected by different fabrics and pattern types. By simultaneously adopting the virtual simulator and 3D analysis, quantitative assessment of virtual clothing simulation was successfully conducted. In light of the results of this study, the resulting methodology is expected to be used as a comprehensive evaluation tool for virtual clothing simulation wear testing.

• Journal of International Society for Simulation Surgery
• /
• 제2권2호
• /
• pp.76-79
• /
• 2015

One of the most serious complications after head and neck radiation is osteoradionecrosis (ORN) of the jaw. The etiology of ORN is extraction, minor dental procedure or dental implant surgery. When ORN of the jaw progressed to stage III, free fibular flap is the most useful methods for reconstruction. In this case report, a 67-year-old ORN patient who underwent fibular free flap reconstruction using simulation surgery with 3-dimensional rapid prototype (3D RP) model was reviewed. After partial mandibulectomy, a osteocutaneous fibula flap was used for reconstruction. Oro-cutaneous fistula was resolved after operation. Patients reported improved food intake after operation without pus discharge. Functional and esthetic results showed successful reconstruction.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.289-292
• /
• 1996

The 2-way beam simulation for the diagnostic ultrasound is performed with simplified computation by approximating the transducer and the system. The results show that the simulation program can be used as a good system design tool.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.235-236
• /
• 2002

Tribological phenomena such as wear or transfer are influenced by various factors and have complicated behavior. Therefore, it is difficult to predict the behavior of the gribological phenomena because of their complexity. But, those tribological phenomena can be considered simply as to transfer micro material particles from the sliding interface. Then, we proposed the numerical simulation method for tribological phenomena such as wear of transfer using stochastic process models. This numerical simulation shows the change of the 3-D surface topography. In this numerical simulation, initial 3-D surface toughness data are generated by the method of non-causal 2-D AR (autoregressive) model. Processes of wear and transfer for some generated initial 3-D surface data are simulated. Simulation results show successfully the change of the 3-D surface topography.

• 지질공학
• /
• 제20권3호
• /
• pp.231-242
• /
• 2010

이 연구는 Liu and Huang (2006)이 개발한 DEBRIS-2D 프로그램을 이용하여 한국의 자연사면을 대상으로 토석류 거동모사의 적용성을 평가하기 위하여 수행하였다. 세립질 및 조립질 물질이 혼재한 대규모 토석류를 모사하기 위해 DEBRIS-2D는 Julien and Lan (1991)이 제안한 구성식을 이용하여 개발되었다. DEBRIS-2D의 이론을 바탕으로 이 연구는 2006년 7월 16일 강원도 인제군 덕산리에서 대규모 토석류 산사태가 발생한 계곡을 모사대상지역으로 선택하였다. 거동 모사 결과, 토사 물질은 산사태 발생 10분 후에 이미 계곡으로 모두 유입되었다. 10분 후 토석류는 계곡부의 첫 번째 변곡점 지점인 개활지에 이르렀으며, 이로 인해 토석류의 속도가 감소하고 흐름 방향이 변하였다. 그 후 토석류는 다시 가속도가 붙어 약 40분 후에 계곡 하류의 마을인근에 이르렀다. 토석류의 최대 속도는 1 m/sec에서 2 m/sec 정도로 비교적 느리고, 토석류의 깊이변화는 계곡의 형태에 많은 영향을 받음을 알 수 있다. 거동모사 결과는 산사태 발생당시 현장의 상황과 매우 유사하게 나타났다. 이는 DEBRIS-2D 프로그램이 알고리즘을 크게 수정하지 않고도 한국의 지질 및 지형조건에 어느 정도 적용 가능함을 의미한다. 그러나, 더욱 신뢰도 높은 토석류 거동모사를 위해서는 국내 지질 및 지형에 대한 최적의 속성값을 결정할 필요가 있다.

• 한국의상디자인학회지
• /
• 제8권2호
• /
• pp.27-35
• /
• 2006

We studied the 3D simulating shapes of the flared skirt using NARCIS-Drape Simulation software made in Korea D&M FT. The experimental conditions were made of three types of cuttings (lengthwise, crosswise, 45 bias) and polyester fabrics for flared skirt (light, medium, heavy) and different simulating repetitions (1, 2, ${\cdots}$, 9, 10 times). We accomplished some experimental data on the 3D simulating shapes of the flared skirt made by different conditions. The 3D simulation shapes of the flared skirts were gradually getting stabilized from 5 repetitions. And the length of skirts and the width and depth of hems diminished lower by degrees as the simulating repetitions. It is considered that the simulating repetition for the flared skirt was appropriate in the range of 8 to 10 times. But it was not reasonably showed that the difference in the drape of the flared skirt was made by different cuttings and fabrics.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.245-250
• /
• 2002

In this paper we presented numerical method for the simulation of powder injection molding filling process, which is one of the key processes in powder injection molding. Rheological properties of powder binder mixture such as slip phenomena and yield stress were introduced into the numerical analysis model of powder injection molding filling simulation. Numerical model can be classified into two types. One is 2.5D model which can be introduced to a arbitrary thin geometry and the other is full 3D model which can be applied to a general 3D shape. For 2.5D model we showed the validity of our CAE system with several verification examples. Finally we suggested flow analysis model for 3D powder injection molding filling simulation.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.101-113
• /
• 2021

Adaptive optics (AO) systems are becoming more complex to improve their optical performance and enlarge their field of view, so it is a hard and time consuming process to set up and optimize the components of AO systems with actual implementation. However, simulations allow AO scientists and engineers to experiment with different optical layouts and components without needing to obtain and prepare them physically. In this paper, we introduce a new AO simulation named the Korea Adaptive Optics Simulation (KAOS), independently developed by LIG Nex1. We verified the performance of KAOS by comparing with other AO simulation tools. In the comparison simulation, we confirmed the results from KAOS and other AO simulation tools were very similar. Also, we proposed a laser tomography AO system with five Rayleigh laser guide stars (LGSs) optimized by using KAOS to overcome the disadvantages of the AO system with a single sodium LGS for the satellite imaging system. We verified the performance of the proposed AO system using KAOS, and the simulation result showed averaged Strehl ratio of 0.37.

• 한국시뮬레이션학회논문지
• /
• 제5권2호
• /
• pp.41-58
• /
• 1996

The Discrete Event Systems Specification(DEVS) formalism specifies a discrete event system in a hierarchical, modular form. This paper presents a distributed simulation environment D-DEVSim++ for models specified by the DEVS formalism. D-DEVSim++ employs a new simulation scheme which is a hybrid algorithm of the hierarchical simulation and Time Warp mechanisms. The scheme can utilize both the hierarchical scheduling parallelism and the inherent parallelism of DEVS models. This hierarchical scheduling parallelism is investigated through analysis. Performance of the proposed methodology is evaluated through benchmark simulation on a 5-dimensional hypercube parallel machine. The performance results indicate that the methodology can achieve significant speedup. Also, it is shown that the analyzed speedup for the hierarchical scheduling time corresponds the experiment.