• 한국정밀공학회지
• /
• 제14권2호
• /
• pp.92-101
• /
• 1997

In this paper, modeling methods for 2D joints are proposed. Earlier methods for modeling 2D joints that use geometric relationships may not consider irregularities or dynamic effects of joints. In any case, it is important to consider irregularities or dynamic effects. To consider those, methods that use dynamic contacts are proposed. With the method, 2D joints that have irregularities or dynamic effects amy be model- ed and analyzed. 2D joints that are developed are revolute, translational, gear and point-follower joint.

• 산업공학
• /
• 제16권spc호
• /
• pp.138-143
• /
• 2003

In this paper, an automated design system for ball-joint parts based on 3-D solid modeler is developed. Parametric modeling and API provided by 3-D solid modeler is engaged to develope the system which consists of four main modules such as : 3-D part modeling, parts assembling, 2-D drafting, and database interfacing modules. The automated design system is implemented on a computer, and shows us that it shorten the design processing time which have taken over 5 hours to only few minutes.

• 한국지반공학회논문집
• /
• 제15권4호
• /
• pp.221-234
• /
• 1999

본 논문에서는 불연속암반내 시공되는 터널의 유한요소해석에 있어서 절리요소를 이용한 불연속면의 모델링에 관한 내용을 다루었다. 불연속 암반터널의 모델링이 가능한 유한요소해석 프로그램의 개발을 위해 기존의 유한요소해석 프로그램 GEOFE2D에 불연속면의 모델링이 가능한 절점변위 절리요소를 적용하고 모형실험 및 기존의 상용프로그램과의 비교를 통해 그 타당성을 검증하였다. 또한 검증된 GEOFE2D를 이용하여 불연속면이 터널의 거동에 미치는 영향을 고찰하기 위해 불연속면이 터널을 관통하는 경우에 대한 해석을 수행하고, 그 과정에서 불연속면과 숏크리트 라이닝 교차부에서의 변위 적합조건을 만족시킬 수 있는 불연속면 모델링 기법을 제시하였다. 한편, 해석결과를 분석한 결과 불연속면은 터널 주변의 응력-변형률 상태에 현저한 영향을 미치며, 특히 불연속면이 관통하는 부위에서의 숏크리트 라이닝 축력 및 휨 모멘트가 현저히 증가하는 것으로 나타났다. 따라서, 불연속면을 포함하는 터널의 거동해석시에는 불연속면에 대한 보다 상세한 모델링이 수반되어야 실제 거동에 보다 근접하는 해석결과를 도출시킬 수 있을 것으로 판단된다.

• Clinics in Shoulder and Elbow
• /
• 제26권2호
• /
• pp.126-130
• /
• 2023

Background: Arm swing plays a role in gait by accommodating forward movement through trunk balance. This study evaluates the biomechanical characteristics of arm swing during gait. Methods: The study performed computational musculoskeletal modeling based on motion tracking in 15 participants without musculoskeletal or gait disorder. A three-dimensional (3D) motion tracking system using three Azure Kinect (Microsoft) modules was used to obtain information in the 3D location of shoulder and elbow joints. Computational modeling using AnyBody Modeling System was performed to calculate the joint moment and range of motion (ROM) during arm swing. Results: Mean ROM of the dominant elbow was 29.7°±10.2° and 14.2°±3.2° in flexion-extension and pronation-supination, respectively. Mean joint moment of the dominant elbow was 56.4±12.7 Nm, 25.6±5.2 Nm, and 19.8±4.6 Nm in flexion-extension, rotation, and abduction-adduction, respectively. Conclusions: The elbow bears the load created by gravity and muscle contracture in dynamic arm swing movement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.601-604
• /
• 2001

The insulation materials of cables used for underground power transmission requires a higher insulating capability. and the most popular method to examine the cable is partial discharge test due to applying variation voltage. In the thesis. air void. silicone oil. of which may possibly exist real cables. are simulated by Electra 2D program. Also the relations between calculated field strength and the void defect type in the cable joint materails. In the modeling. electic field inner to the cable joint material composed by XLPE and EPDM is modeling simulated. We obtained the electric field distribution in void due to two conditions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.601-604
• /
• 2001

The insulation materials of cables used for underground power transmission requires a higher insulating capability, and the most popular method to examine the cable is partial discharge test due to applying variation voltage. In the thesis, air void, silicone oil, of which may possibly exist real cables, are simulated by Electro 2D program. Also the relations between calculated field strength and the void defect type in the cable joint materials. In the modeling, eclectic field inner to the cable joint material composed by XLPE and EPDM is modeling simulated. We obtained the electric field distribution in void due to two conditions.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2011년도 추계 총회 및 창립 30주년 기념 심포지엄
• /
• pp.3-21
• /
• 2011

Laboratory experiments and numerical simulations using Particle Flow Code (PFC2D) were performed to study the effects of joint separation and joint overlapping on the full failure behavior of rock bridges under direct shear loading. Through numerical direct shear tests, the failure process is visually observed and the failure patterns are achieved with reasonable conformity with the experimental results. The simulation results clearly showed that cracks developed during the test were predominantly tension cracks. It was deduced that the failure pattern was mostly influenced by both of the joint separation and joint overlapping while the shear strength is closely related to the failure pattern and its failure mechanism. The studies revealed that shear strength of rock bridges are increased with increasing in the joint separation. Also, it was observed that for a fixed cross sectional area of rock bridges, shear strength of overlapped joints are less than the shear strength of non-overlapped joints.

• 마이크로전자및패키징학회지
• /
• 제18권2호
• /
• pp.35-41
• /
• 2011

Recently, board level solder joint reliability performance of IC packages during drop impact becomes a great concern to semiconductor and electronic product manufacturers. The handheld electronic products are prone to being dropped during their useful service life because of their size and weight. The IC packages are susceptible to solder joint failures, induced by a combination of printed circuit board (PCB) bending and mechanical shock during impact. The board level drop testing is an effective method to characterize the solder joint reliability performance of miniature handheld products. In this paper, applying the JEDEC (JESD22-B111) standard present a finite element modeling of the FBGA. The simulation results revealed that maximum stress was located at the outermost solder ball in the PCB or IC package side, which consisted well with the location of crack initiation observed in the failure analysis after drop reliability tests.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.479-484
• /
• 2004

For the rational design of welded joint, it is needed to assess repeatedly the fatigue life of the joint with various dimensions and welding conditions. In this paper, an automation of repeated process of fatigue life assessment for welded cruciform joint was studied. The process is related to stress analysis in vicinity of weld-toe and fatigue life assessment based on analyzed stress distribution. With the change of design condition including dimensions and/or welding heat input, the above two works have to be performed. Using the commercial tool for system integration, ModelCenter, an automation of the repeated process for welded cruciform joint based on 2D modeling was achieved. In this automation system, data exchanges between programs regardless of commercial or in-house one work well, and parametric studies for optimal design can be performed.

• 한국강구조학회 논문집
• /
• 제11권1호통권38호
• /
• pp.23-31
• /
• 1999

결합부위의 해석을 위하여, 계산 효율과 정확성이 모두 뛰어난 단순모델의 사용이 필요한 경우가 많다. 이 단순모델은 결합부위의 특성을 잘 묘사하는 파라미터들로 구성된다. 이들 파라미터의 값은 실험을 통하여 얻어지게 된다. 따라서 단순모델은 실험에서 사용된 하중하에서는 결합부위의 거동을 잘 묘사하지만, 그외 다른 하중하에서는 결합부위의 거동을 어느 정도 구현할지 알 수 없다. 따라서 단순모델의 정확성을 객관적으로 얻을 수 있는 방법이 필요하게 된다. 본 연구에서는 역최적화 (antioptimization) 개념으로 최악의 하중조건을 정의하여, 이 하중하에서 단순모델의 정확성을 평가하는 방법을 제시하였다. 최악의 하중조건 하에서, 용접으로 체결된 3차원 결합부위의 단순모델과 2차원 구조물에서의 결합부위 단순모델의 정확성을 평가하였다.