• Design & Manufacturing
• /
• 제2권4호
• /
• pp.16-23
• /
• 2008

This paper describes $R_p,\;R_d,\;R_c,\;R_{cp},\;R_{cd}$ for design and manufacture of die by comparing the results. Results of this study could be reduced from three processes to two processes and drawing can be conducted using one die set by modifying structure of the punch head and die plate. Oil canning phenomenon can be prevented when circle blanking or ellipse blanking in blanking drawing. $R_c$, the important factor of drawing process was able to evaluate properly in designing of product.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.249-251
• /
• 2012

증강현실은 가상현실과 달리 현실 세계를 바탕으로 가상정보를 제공함으로, 보다 향상된 현실감과 상호작용을 가능케 하는 장점이 있다. 본 논문에서는 스마트폰이나 테블릿 PC에서 선박 3D 모델을 시각화하는 증강현실 기반의 선박설계 시각화 시스템을 제안한다. 제안된 시스템은 Contour 기법으로 모서리점을 추출하고, Harris의 코너점 검출기로 대표 특징점을 추출하여 설계도면 데이터베이스를 구축한다. SURF 알고리즘을 이용하여 카메라로부터 입력받은 설계도면 영상에서 대표 특징점들을 추출하여 서버에 저장된 설계도면 DB의 특징점과 설계도면을 매칭하여 인식한다. 인식된 설계도면은 모바일 기기에서 3D 선박 구조물을 증강하여 시각화한다. 기존의 2D로 이루어지는 영업설계에 비해 선박의 이해가 용이하며 설계기간을 단축시키는 효과로 영업경쟁력이 향상될 것으로 기대된다.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.103-108
• /
• 2008

3 차원 공간 모델링을 하기 위한 스케치 시스템의 경우, 3 차원 공간상의 입력 장치를 이용하는 것이 디자이너의 의도를 가장 정확하게 표현할 수 있다. 하지만, 3 차원 공간상의 스케치는 공간 입력 장치의 디자이너 사용에 따라 오차가 방생할 수 있다. 이러한 오차를 줄이기 위하여 디자이너가 일반적으로 사용해 온 드로잉 방식인 다중의 스트로크를 데이터로 사용하여 의도한 모델링을 수행하게 된다. 다중의 스트로크를 실시간으로 처리하기 위해 공간상에 정의된 격자를 이용한 모델링 방식을 사용하였다. 곡면을 구성하기 위한 격자간의 관계 및 다중의 스트로크를 처리하기 위한 주변 격자간의 관계를 정리하고, 이를 이용한 스케치 시스템을 구현하였다.

• 한국자동차공학회논문집
• /
• 제2권1호
• /
• pp.84-95
• /
• 1994

The effects of punch and blank shapes in the rectangular cup drawing process are examined experimentally to improve the formabilities. For this purpose, three blank shapes which are h-bl., G-bl., and T-bl., and five punch shape factors which are the ratios of two adjacent side lengths in rectangular cross section are adopted. The constructing methods of the three blank shapes are as follows. The h-bl. is designed by slip-line theory, and the G-bl. is selected for the similar shape to the punch. The T-bl. is obtained by the drawing method which is introduced in the technical references. The five punch shape factors are selected for length/width=1, 1.25, 1.5, 1.75 and 2. The experimental procedures are performed for all the above forming conditions to investigate and compare the formabilities. As a result, it is verified experimentally that the rectangular cups drawn by the h-bl. are more ideal than those drawn by G-bl. and T-bl.. They have not only higher limiting drawing ratio, more uniformity in drawn cup heights and more ideal thickness distributions, but also need relatively less maximum drawing forces.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.291-295
• /
• 2003

The occurrence of ductile fracture is the working limit of many metal forming processes. It is necessary to predict the criteria and to apply the condition in a process design. Over the years. the way for clarifying conditions have been studied and presented. However such a way needs lots of experiments and analysis. In this study, in order to determine the critical damage value of a used material Cu 4N, it was performed a tensile test and FEM analysis by using DEFORM 2D. For applying the obtained critical damage value it was also performed a upsetting test by using DEFORM 2D. The way of determining a critical damage value which is presented in this study will make possible to find easily it which is one of the working limit factor. And the way of determining a critical damage value will make possible to find in multi-pass drawing process.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.593-600
• /
• 2009

In Korea, the government has developed SEUMTER, an administration system for building related public service, to facilitate and promote the electronic submission and permission activities. SEUMTER is progressing legality system based on 2D drawing for building administration permission service. However, there are a lot of problems related to legality system owing to complexity of Korea regulation relation and structure, inefficiency of legality system based on 2D drawing, duplication examination of document (soliciting forms for civil affairs) and drawing. Therefore, the purpose of this study is to develop legality system for building administration permission service based on BIM in Korea. To achieve this purpose, the authors have investigated permission procedure and regulation structure that is used in current building administration permission and suggested permission procedure and regulation structure for legality system based on BIM. In addition, the authors have investigated element technologies (for examples, method of structured regulation, BIM model checker, Viewer, etc) for legality system based on BIM. Finally, the authors have suggested strategy and hereafter direction for application of legality system based on BIM.

• 한국건축시공학회지
• /
• 제7권3호
• /
• pp.91-98
• /
• 2007

Recently a construction industry introduces information that brings about many advantages in the early planning phase, design phase and construction phase. Especially it replaces 2D, 3D systems(usually using explanation of drawing information) ai 4D CAD(offering a sort of 4D-having relation of construction schedule and 3D drawing information). Nevertheless a 4D has these benefits, it has limits which are not only usually using 3D modeling but also limit of making full use of practical affairs because of a lack of connecting varietals of progress of work. To solve these uppermost limits, this research is presenting unified systems to use in risk management which are efficient management of space and non-space information, space analysis, making full use of data base, introducing GIS system of easy interaction.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 춘계학술대회 논문집
• /
• pp.42-47
• /
• 1997

In this study, the drawing characteristics of circular drawbead are examined with the plane strain elastic-plastic FE Method by varying the process variables such as friction coefficient, drawbead radius, and closing depth. Numerical analysis are carried out by 2-D elastic-plastic F.E.M. The results are compared with the existing experimental results about the drawing force, the die clamping force, and the strain distribution of upper and lower sheet faces

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제36권11호
• /
• pp.875-890
• /
• 2009

대사체학은 대사 경로 네트워크를 통해 생명 활동을 이해하고자 하는 분야로서, 대사 경로 내의 흐름을 한 눈에 알 수 있도록 가시화하여 보여 주는 도구가 반드시 필요하다. 이러한 가시화 도구의 경우 노드수가 증가할수록 에지 교차가 기하급수적으로 증가하는 문제가 있다. 따라서 유전체 수준의 대사경로를 연구하기 위해서는 대사 경로 그래프 레이아웃 상에 나타나는 에지 교차를 줄이는 것이 시각화의 매우 중요한 부분이다. 본 논문에서는 대사 경로의 구조적인 특징에 기반한 3차원 공간 상에 대사 경로 그래프를 레이아웃해 주는 모듈을 설계, 구현하였다. 2-계층 레이아웃을 이용하여 대사 경로 그래프를 계층적으로 레이아웃함으로써 표현영역을, 3차원으로 확장시키고 기존의 2차원 레이아웃 알고리즘 적용시 번번히 나타나는 에지 교차의 수를 감소시키는 결과를 얻었다.

• 소성∙가공
• /
• 제8권4호
• /
• pp.340-346
• /
• 1999

Circular drawbead forming and drawing characteristics of CO2 laser welded SPC1 blanks are investigated by experiments and numerical analysis. During the drawbead forming process, the distributions of major strain on upper and lower skins of the specimens are measured. During the drawing process, the drawing forces and the strain distributions are investigated. For the numerical analysis. DYNA3D and SGTAS, a developed rigid-plastic finite-element computer program are used. Numerical results predicted the deformation characteristics well in comparison with experiments. It is concluded that the strains and restraining forces during the forming and the drawing processes show different patterns according to the combination of welded blanks.