• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.231-243
• /
• 2016

This study presents the applicability of two-dimensional (2D) flood inundation model by applying to real irrigation reservoir failure with limited available data. The study area is Sandae Reservoir placed in Gyeongju and downstream area of it and the reservoir was failured by piping in 2013. The breach hydrograph was estimated from one-dimensional (1D) hydrodynamic model and the discharge was employed for upstream boundary of 2D flood inundation model. Topography of study area was generated by integrating digital contour map and satellite data, and Cartesian grids with 3m resolution to consider geometry of building, road and public stadium were used for 2D flood inundation analysis. The model validation was carried out by comparing predictions with field survey data including reservoir breach outflow, flood extent, flood height and arrival time, and identifying rational ranges with allowed error. In addition, the applicability of 2D model is examined using different simulation conditions involving grid size, building and roughness coefficient. This study is expected to contributed to analysis of irrigation reservoirs were at risk of a failure and setting up Emergency Action Plan (EAP) against irrigation reservoir failure.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.141-152
• /
• 2008

The 3D building modeling is one of crucial components in constructing 3D geospatial information. The existing methods for 3D building modeling depend mainly on manual photogrammetric processes, which indeed take great amount of time and efforts. In recent years, many researches on 3D building modeling using aerial LiDAR data have been actively performed to aim at overcoming the limitations of existing 3D building modeling methods. Either techniques with interpolated grid data or data fusion with digital map and images have been investigated in most of existing researches on 3D building modeling with aerial LiDAR data. The paper proposed a method of 3D building modeling with LiDAR data only. Firstly, octree-based segmentation is applied recursively to LiDAR data classified as buildings in 3D space until there are no more LiDAR points to be segmented. Once octree-based segmentation is completed, each segmented patch is thereafter merged together based on its geometric spatial characteristics. Secondly, building model components are created with merged patches. Finally, a 3D building model is generated and composed with building model components. The experimental results with real LiDAR data showed that the proposed method was capable of modeling various types of 3D buildings.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.2 no.1
• /
• pp.9-15
• /
• 2002

As architectural forms tend to be large-scaled, high-storied and complicated, use of computer for processing design information has been generalized. However, CAD use in the process of developing architectural design has been neglected greatly in the educational field of architectural field due to the surging of recognition that it may limit the essential property of architectural design. It may be resulted from the limitation of CAD system, that is, it is because of tardy speed of application development for the related areas with the lack of simplicity and clarity of flexibility to be secured on the drawing and user interface. Recent CAD systems, however, overcome such a limitation, convert into object-based design from entity-based drawing, drafting and modeling for implementing design concept of architects and it connects with internet linked to superspeed information communication network and changes process and stream of architectural design. Therefore, this study deals with utility of object based CAD system with products of Autodesk Co. and consequently obtain the following conclusions. First, it expands architect's design areas by supporting cooperative design system based on model-based architectural design and internet. Second, it reduces consumption of personal and material resources and time in the process of drawing production for improving architectural design works. Third, it can reduce the frequent design changes by improving understanding of architectural space with visualization of immediate 3D information, escaping from traditional methods to deliver design information to building owner through 2D drawing or model and perspective drawing requiring much cost and time. Fourth, it keeps exactness without omission or duplication of design information and generate and renew information of all related drawings on a drawing. Fifth, it is possible to change difficult and boring architectural design work into a pleasure owing to immediate modeling and drawing of design idea. In addition, digital drawing generated by using object-based CAD system can playa role of establishing Urban Information System to be used for protecting from building in disaster and urban disasters in connection with GIS numerical map and be used for reference of all kinds of information required fro post-management of buildings. However, what is more important is that surplus time from introduction of object-based CAD system should be used for consideration to be recognized as a good space and building built as a product of this project for comfort to urban people.

• Spatial Information Research
• /
• v.14 no.2 s.37
• /
• pp.235-244
• /
• 2006

The MMS(Mobile Mapping System) using the vehicle equipped GPS, IMU and CCD Cameras is the effective system for the management of the road facilities, update of the digital map, and etc. The image, vehicle's 3 dimensional position and attitude information provided MMS is a important source for positioning objects included the image. In this research we applied the tracking technique to the specific object in image. The extraction of important object from immense MMS data makes more effectiveness in this system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_2
• /
• pp.645-651
• /
• 2007

In general, contours in digital vector maps, which represent terrain characteristics and shape, are created by 3D digitizing the same height points using aerial photographs on the analytical or digital plotters with stereoscopic viewing. Hence, it requires lots of task, and subjective decision and experience of the operators. DTMs are generated indirectly by using contours since the national digital maps do not include digital terrain model (DTM) data. In this study, model key points which depict the important information about terrain characteristics were extracted from the contours. Further, determination of the efficient and flexible grid sizes were proposed to generate optimal DTM in terms of both quantitative and qualitative aspects. For this purpose, a progressive sampling technique was implemented, i.e., the smaller grid sizes are assigned for the mountainous areas where have large relief while the larger grid sizes are assigned for the relatively flat areas. In consequence, DTMs with multi-grid for difference areas could be generated instead of DTMs with a fixed grid size. The multi-grid DTMs reduce computations for data processing and provide fast display.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.2
• /
• pp.131-140
• /
• 2020

Recently the importance of BIM (Building Information Modeling) that enables 3D location-based design and construction work is being highlighted around the world. In Korea, the road map has been established to settle the design based on BIM using drone survey results by 2025. As the first step, BIM would be applied to road construction projects worth more than 50 billion Korean Won from 2020. On the other hand, drone survey regulation has been enacted and the data for drone survey cost were also included on Standard of construction estimate in 2020. However, more careful improvement is required to reflect drone survey results in BIM design and construction. Currently, Engineering instructions and Standard of construction estimate specifies that earthwork volume must be calculated by cross section method only. So it is required to add the method of DEM (Digital Elevation Model) based volume calculation on these regulations to realize BIM application. In order for that, this study verified the method of DEM based earthwork volume calculation. To get an accurate DEM for accurate volume computation, drone survey was carried out according to the drone survey regulation and then could get an accurate DEM data which have errors less than 3cm in X, Y and 6.8cm in H. As each DEM cell has 3D coordinate component, the volume of each cell can be calculated by obtaining the height of area of the cell then total volume is calculated by multiplying total number of cells by volume of each cell for the construction area. Verification for the new calculation method compare with existing method was carried out. The difference between DEM based volume by drone survey and cross section based volume by traditional survey was less than 1.33% and it can be seen that new DEM method will be able to be applied to BIM design and construction instead of cross section method.

• International Journal of Computer Science & Network Security
• /
• v.22 no.8
• /
• pp.15-24
• /
• 2022

The article clarifies the conditions for information, digital and educational accessibility for higher education seekers with disabilities in terms of distance learning caused by quarantine restrictions. It is established that such conditions are regulated by international and Ukrainian legal documents (The Standard Rules on the Equalization of Opportunities for Persons with Disabilities, Convention on the Rights of Persons with Disabilities, Sustainable Development Goals, Law of Ukraine "On Education", Law of Ukraine "On Higher Education", Strategy for the Development of Higher Education in Ukraine 2021-2031, Development Strategy areas of innovation for the period up to 2030, Development strategy of the sphere of innovation activity for the period up to 2030). As a part of information barrierlessness, Higher Education Institutions (HEI) should provide access to information in various formats and using technologies, in particular Braille script, large-type printing, audio description (audio descriptive commenting), sign language interpretation, subtitling, a format suitable for reading by screen access programs, formats of simple speech, easy-to-read formats, means of alternative communication. The experience of Pavlo Tychyna Uman State Pedagogical University is described. In particular, special attention is paid to the study of sign language: in view of this, the initiative group implemented the project "Learning to hear and overcome social isolation together" with the financial support of the British Council in Ukraine. Within the framework of digital accessibility, the official website of the Faculty of Social and Psychological Education has been adapted for the visually impaired in accordance with WCAG 2.0 World Standards. In 2021, Pavlo Tychyna Uman State Pedagogical University implemented the project "Cultural, Recreational and Tourist Cherkasy Region: Inclusive Social 3D Map" funded by the Ukrainian Cultural Foundation; a site with available content for online travel in the region to provide barrier-free access to the historical and cultural heritage of Cherkasy region was created. Educational accessibility is achieved by increasing the number of people with special educational needs, receiving education in inclusive groups; activities of the Center for Social and Educational Integration and Inclusive Rehabilitation Social Tourism "Bez barieriv" ("Without barriers"); implementation of a research topic for financing the Ministry of Education and Science of Ukraine: "Social and psychological rehabilitation of children and youth with special educational needs by means of inclusive tourism"; implementation of the project "Social inclusion of distance educational process"; development of information campaigns to popularize the ideas of accessibility, the need for its implementation, ongoing training programs and competitions, etc.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.975-988
• /
• 2020

Change detection is the process of identifying changes by observing the multi-temporal images at different times, and it is an important technique in remote sensing using satellite images. Among the change detection methods, the unsupervised change detection technique has the advantage of extracting rapidly the change area as a binary image. However, it is difficult to understand the changing pattern of land cover in binary images. This study used grid points generated from seamless digital map to evaluate the satellite image change detection results. The land cover change results were extracted using multi-temporal KOMPSAT-3A (K3A) data taken by Gimje Free Trade Zone and change detection algorithm used Spectral Angle Mapper (SAM). Change detection results were presented as binary images using the methods Otsu, Kittler, Kapur, and Tsai among the automated threshold selection algorithms. To consider the seasonal change of vegetation in the change detection process, we used the threshold of Differenced Normalized Difference Vegetation Index (dNDVI) through the probability density function. The experimental results showed the accuracy of the Otsu and Kapur was the highest at 58.16%, and the accuracy improved to 85.47% when the seasonal effects were removed through dNDVI. The algorithm generated based on this research is considered to be an effective method for accuracy assessment and identifying changes pattern when applied to unsupervised change detection.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.28 no.3
• /
• pp.217-240
• /
• 2017

The purpose of this study was to investigate the semantic network analysis to understand image contents and to examine the degree to which words, word clusters contributed to the formation of semantic map within image contents. For this research, from 1993 until 2016 the field of the image contents were collected for a total of 2,624 cases papers. The word appeared in Title analyzed the social network by using the R program of Big Data. The results were as follows: First, The field of image contents is based on researches related to 'image', 'media' and 'contents'. Second, there is a three-step flow ('education' -> 'media' -> 'contents') of research in the field of image contents. Third, researches related to 'broadcasting', 'digital', 'technology', and 'production' were continuously carried out. Finally, There were new research subjects for each regime.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.289-293
• /
• 2010

21C 현대 문명사회에서는 도시의 고밀도 및 팽창으로 인하여 도시 내 생태계가 파괴되면서 생물서식처의 환경 악화 및 엄청난 감소가 초래되었으며, 그 결과로 인하여 인간과 생물이 접촉할 수 있는 공간이 현저하게 줄어들고 있다. 또한 도시 영역의 확장을 위하여 산림 및 녹지의 감소, 녹지의 분절 및 단절화, 해안 매립 등이 계획 없이 무분별하게 진행됨으로써, 각종 동식물의 개체 수 감소 및 토양의 건조화 등이 발생하고 있으며, 그 영향으로 생물종의 다양성이 떨어지고, 도시 생태계의 교란이 심해지고 있다. 이러한 도시 생태계의 교란은 도시에 거주하고 있는 시민들의 생활의 질이 떨어지게 하고 많은 환경 문제들의 주원인이 되고 있다. 지속적이면서도 자연친화적인 도시발전을 위해서는 도시 내 자연생태계를 회복하고 생물서식공간을 종합적으로 보전하면서 복원해야 한다는 요구가 높아지고 있지만, 이를 체계적으로 이루기 위한 방법론의 부재에 시달리고 있었다. 이러한 가운데 유럽을 중심으로 생겨난 비오톱(Biotope)과 비오톱 지도화 방법이 생태계를 보전하며, 시민들에게 다양한 자연체험과 휴양 기회를 제공하고 친환경적인 도시계획을 위한 핵심적인 역할을 하는 것으로 인식되고 있다. 하지만, 기존의 비오톱 지도는 이미지 기반의 2차원 지도로 제공되고 있어, 거리 및 공간 분석에 취약하고 정보전달력이 부족하여, 익숙한 전문가가 아닌 경우 비오톱을 이해하는데 상당한 정도의 시간이 필요하였다. 이에 본 논문에서는 공간정보가 결여된 2차원 형태의 GIS 데이터를 기반으로 3차원 공간 데이터를 자동으로 생성하고, 위성영상과 DEM(Digital Elevation Model)을 이용하여 3차원 지형을 만들어 각 주제도별로 입체적인 분석이 가능하도록 하였다. 또한 동영상 녹화 기능과 3차원 객체 추가 기능을 이용하여, 자연생태계를 고려한 도시의 설계를 진행하는 경우 3차원적인 모델링을 제공함으로써 효과적이면서도 사용자의 이해도를 향상 시킬 수 있는 정보 전달력을 가질 수 있도록 설계 및 구현하였다.