• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.6
• /
• pp.18-28
• /
• 2015

The purpose of this study is to develop a new seismic resistant method by using precast concrete wall panels for existing low-rise, reinforced concrete beam-column buildings such as school buildings. Three quasi-static hysteresis loading tests were performed on one unreinforced beam-column specimen and two reinforced specimens with U-type precast wall panels. The results were analyzed to find that the specimen with anchored connection experienced shear failure, while the other specimen with steel plate connection principally manifested flexural failure. The ultimate strength of the specimens was determined to be the weaker of the shear strength of top connection and flexural strength at the critical section of precast panel. In this setup of U-type panel specimens, if a push loading is applied to the reinforced concrete column on one side and push the precast concrete panel, a pull loading from upper shear connection is to be applied to the other side of the top shear connection of precast panel. Since the composite flexural behavior of the two members govern the total behavior during the push loading process, the ultimate horizontal resistance of this specimen was not directly influenced by shear strength at the top connection of precast panel. However, the RC column and PC wall panel member mainly exhibited non-composite behavior during the pull loading process. The ultimate horizontal resistance was directly influenced by the shear strength of top connection because the pull loading from the beam applied directly to the upper shear connection. The analytical result for the internal shear resistance at the connection pursuant to the anchor shear design of ACI 318M-11 Appendix-D, agreed with the experimental result based on the elastic analysis of Midas-Zen by using the largest loading from experiment.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.2
• /
• pp.33-40
• /
• 2014

The purpose of this study is to examine vegetation of the outer walls of the Jeongyi Town Wall in Jeju and analyze the characteristics and problems identified, for suggesting preliminary data for selecting species of plants appropriate for the greening of the walls in the southern temperate climate region, including Jeju. The result of this study is as follows. The number of plants growing naturally around the walls of the town was identified to be 52 taxa. Based on the list of naturalized plants, there are 5 taxa; Sonchus oleraceus, Houttuynia cordata, Crassocephalum crepidioides, Erigeron annuus and Lamium purpureum. The number of species by district was from 3 to 14 taxa with 7.1 taxa on average. Analyzing by the constancy class, plants in class III included Sedum bulbiferum, Trichosanthes kirilowii, Hedera rhombea and Boehmeria nivea. Manipulation of the species composition table shows that the number of plant species growing naturally around the walls of Jeongyi Town Wall is a total of 52 taxa, including 11 taxa by differential species of community and 41 taxa by companion species. The types of plants very useful for the covering of the walls are evergreen climbing vine, such as Hedera rhombea, Ficus thunbergii and Euonymus fortunei and deciduous climbing vine, such as Parthenocissus tricuspidata, Trichosanthes kirilowii and Paederia scandens. In addition, Ficus stipulata is identified as a vegetation more appropriate for the southern-ward lattice-blocked walls. Woody plants, such as Akebia quinata, Celastrus flagellaris, Ampelopsis brevipedunculata for. citrulloides, Rubus hirsutus, Clematis apiifolia and herbaceous plants, such as Dioscorea tenuipes, D. quinqueloba, D. nipponica, Cayatia japonica and Paederia scandens var. angustifolia are highly useful materials for climbing plants for covering the walls of the southern province. Pteridophyte, such as Lemmaphyllum microphyllum, Pteris multifida, Cyrtomium falcatum and Lygodium japonicumare suggested as very useful for increasing unique regional characteristics of the southern province, including Jeju.

• The Korean Journal of Vision Science
• /
• v.20 no.4
• /
• pp.469-482
• /
• 2018

Purpose : We investigated the change of spherical and comma aberrations after wearing aspheric soft contact lens (ASCL) in young myopes. Methods : Fifty young myopes ($23.15{\pm}1.70years$, spherical equivalent: $-2.90{\pm}1.75D$) were recruited and refractive errors were corrected using ASCL (Biotrue, Bausch+Lomb, USA). High order aberrations were measured in the 4 mm pupil size using the wavefront analyze and pupil sizes were measured with a pupillometer at the modes of scotopic condition (light off) at 3.5 m in the 100 lx illuminance condition. Results : Spherical aberrations and coma aberration of the 20s myopes were $0.026{\pm}0.031{\mu}m$ and $0.078{\pm}0.039{\mu}m$ respectively, and $0.019{\pm}0.026{\mu}m$ and $0.082{\pm}0.038{\mu}m$ after ASCL wear that spherical aberration was decreased and coma aberration was increased. However, spherical aberration was decreased in the 68% of the subject have positive spherical aberration, and increased in the 11% of the subject have negative spherical aberration. Coma aberration was increased in the 53% of the subject, did not change in the 19% of the subjects, and decreased in the 28% of the subject. Spherical aberration was not different with the refractive errors in low and moderate myopies, however, coma aberrations was higher in the higher myopes. Conclusion : In a scotopic condition without accommodation stimuli, spherical aberration is decreased after wearing ASCL, however in the subject have negative spherical aberration spherical aberration could be increased, and which is thought to be the influence of contact lens design and pupil size.

• Journal of Animal Science and Technology
• /
• v.53 no.2
• /
• pp.113-118
• /
• 2011

This study was conducted to evaluate effects of enzyme complex on growth performance, nutrient digestibility, blood profiles and feed cost in growing pigs. Ninety-six pigs [(Landrace ${\times}$ Yorkshire) ${\times}$ Duroc, $22.96{\pm}0.79$ kg average initial body weight] were used in 42d growth assay. Dietary treatments included:1) HC (high energy and nutrient density diet), 2) CON (control, basal diet), 3) CE1 (CON + 0.05% enzyme complex) and 4) CE2 (CON + 0.1% enzyme complex). Four pigs were allotted per pen with six replicate pens per treatment by completely randomized design. The ADG was higher in CE1 and CE2 treatments than CON treatment (P<0.05). The ADFI was linearly increased by CE treatments compared to HC treatment. The CE1 treatment had highest DM, N and GE digestibility (P<0.05). Digestibility of DM, N and GE were quadratic enhanced by enzyme complex level. No differences were found among treatments for creatinine and BUN. The enzyme complex treatments (CE1 and CE2) showed lower feed cost/body weight gain than HC treatment. In conclusion, enzyme complex can improve ADG and reduce feed cost/body weight gain when low energy diet was used. Furthermore adding 0.05% enzyme complex had highest nutrient digestibility.

• Korean Journal of Poultry Science
• /
• v.39 no.3
• /
• pp.167-175
• /
• 2012

This study was undertaken to assess dietary CP and ME concentrations for optimum growth performance and carcass characteristics of Korean Native male ducks. In a $3{\times}3$ factorial arrangement, 1-d-old Korean Native male ducks were completely randomized design to experimental diets with 3,000, 2,900, and 2,800 kcal of ME/kg of diet; each contained 23, 22, and 21% CP, respectively, from 0 to 3 wk of age. From 4 to 8 wk of age, experimental diets had 3,100, 3,000, and 2,900 kcal of ME/kg of diet, and each contained 19, 18, and 17% CP, respectively. Each dietary treatment was replicated 4 times, and feed and water were provided ad libitum. Body weight, feed intake and uniformity were measured at 3 wk and 8 wk, and carcass characteristics were evaluated at 8 wk. As CP increased from 21 to 23 %, the body weight, BW gain and feed conversion ratios (FCR) linearly improved (P<0.01) during 0 to 3 wk of age. From 4 to 8 wk of age, the body weight, feed intake, BW gain, FCR and uniformity were not different (P>0.05). Carcass ratios of birds fed 3,000 kcal of ME/kg diets from 3 to 8 wk of age were quadratically increased significantly (P<0.01). As ME and CP increased, respectively, relative weight of liver weight per 100 g of BW was linearly decreased (P<0.01). Relative weights of left breast, thigh and drumstick weight per 100 of BW were not different (P>0.05). Also, breast meat color, pH, cooking loss and shear force were not different (P>0.05). Thus, diets with 2,800 kcal of ME/kg and 23% CP or with 2,900 kcal of ME/kg and 17% CP at 0 to 3 wk and 4 to 8 wk, respectively, were used more efficiently. However, diets with 3,000 kcal of ME/kg at 4 to 8 wk in carcass rate was quadratically increased.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.61-62
• /
• 2003

Clonal propagation of high-value forest trees through somatic embryogenesis (SE) has the potential to rapidly capture the benefits of breeding or genetic engineering programs and to improve raw material uniformity and quality. A major barrier to the commercialization of this technology is the low quality of the resulting embryos. Several factors limit commercialization of SE for Corsican pine, including low initiation rates, low culture survival, culture decline causing low or no embryo production, and inability of somatic embryos to fully mature, resulting in low germination and reduced vigour of somatic seedlings. The objective was to develop a Corsican pine maturation medium that would produce cotyledonary embryos capable of germination. Treatments were arranged in a completely randomized design. Data were analyzed by analysis of variance, and significant differences between treatments determined by multiple range test at P=0.05. Corsican pine (Pinus nigra var. maritima) cultures were initiated on modified !P6 medium. Modifications of the same media were used for culture multiplication and maintenance. Embryogenic cultures were maintained on the same medium semi solidified with 2.5 g/l Gelrite. A maturation medium, capable of promoting the development of Corsican pine somatic embryos that can germinate, is a combination of iP6 modified salts, 2% maltose, 13% polyethylene glycol (PEG), 5 mg!l abscisic acid (ABA), and 2.5 g/l Gelrite. After initiation and once enough tissue developed they were grown in liquid medium. Embryogenic cell suspensions were established by adding 0.951.05 g of 10- to 14-day-old semisolid-grown embryogenic tissue to 9 ml of liquid maintenance media in a 250ml Erlenmeyer flask. Cultures were then incubated in the dark at 2022$^{\circ}$C and rotated at 120 rpm. After 2.53 months on maturation medium, somatic embryos were selected that exhibited normal embryo shape. Ten embryos were placed horizontally on 20 ml of either germination medium ($\frac{2}{1}$strength Murashige and Skoog (1962) salts with 2.5 g/l activated charcoal) or same medium with copper sulphate adjusted to 0.25 mg/1 to compensate for copper adsorption by activated carbon. 2% and 4% maltose was substituted by 7.5% and 13% PEG respectively to improve the yield of the embryos. Substitution of' maltose with PEG was clearly beneficial to embryo development. When 2% of the maltose was replaced with 7.5% PEG, many embryos developed to large bullet-shaped embryos. At latter stages of development most embryos callused and stopped development. A few short, barrel-shaped cotyledonary embryos formed that were covered by callus on the sides and base. When 4% of the maltose was removed and substituted with 13% PEG, the embryos developed further, emerging from the callus and increasing yield slightly. Microscopic examination of the cultures showed differing morphologies, varying from mostly single cells or clumps to well-formed somatic embryos that resembled early zygotic embryos only liquid cultures with organized early-stag. A procedure for converting and acclimating germinants to growth in soil and greenhouse conditions is also tested. Seedling conversion and growth were highly related to the quality of the germinant at the time of planting. Germinants with larger shoots, longer, straighter hypocotyls and longer roots performed best. When mature zygotic embryos germinate the root emerges, before or coincident with the shoot. In contrast, somatic embryos germinate in reverse sequence, with the cotyledons greening first, then shoot emergence and then, much later, if at all, the appearance of the root. Somatic seedlings, produced from the maturation medium, showed 100% survival when planted in a field setting. Somatic seedlings showed normal yearly growth relative to standard seedlings from natural seed.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.210-216
• /
• 2007

A study was conducted to find mechanism and spray characteristics of a mini-sprinkler with downward spray to develop a new design type to be able to prevent drop water. The experiments were executed in a plastic greenhouse to minimize the effect of the wind. Data was collected at five different operation pressures and at 4 different raiser heights. Spray characteristics of the sprinkler such as effective radius, effective area, mean application depth, absolute maximum application depth, effective maximum application depth and coefficient of variation were determined. In order to analyze the mechanism and packing supporter of sprinkler, the numerical simulation using ABAQUS was performed. The optimum pressure for preventing drop water was determined.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.2
• /
• pp.120-127
• /
• 2015

Purpose: The aim was to investigate the effect of implant thread designs on the stress dissipation of the implant. Materials and methods: The threads evaluated in this study included the V-shaped, buttress, reverse buttress, and square-shaped threads, which were of the same size (depth). Building four different implant/bone complexes each consisting of an implant with one of the 4 different threads on its cylindrical body ($4.1mm{\times}10mm$), a force of 100 N was applied onto the top of implant abutment at $30^{\circ}$ with the implant axis. In order to simulate different osseointegration stages at the implant/bone interfaces, a nonlinear contact condition was used to simulate immature osseointegration and a bonding condition for mature osseointegration states. Results: Stress distribution pattern around the implant differed depending on the osseointegration states. Stress levels as well as the differences in the stress between the analysis models (with different threads) were higher in the case of the immature osseointegration state. Both the stress levels and the differences between analysis models became lower at the completely osseointegrated state. Stress dissipation characteristics of the V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration. These results indicated that implant thread design may have biomechanical impact on the implant bed bone until the osseointegration process has been finished. Conclusion: The stress dissipation characteristics of V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.12
• /
• pp.1734-1740
• /
• 2001

Feeding trials using weanling pigs and broiler chicks were conducted to evaluate the efficacy of different metal-amino acid chelates and complexes at various levels of copper and zinc on the performance and fecal excretions. A total of 200 weanling pigs (Large White ${\times}$ Yorkshire ${\times}$ Duroc, $11.20{\pm}0.81kg$) were randomly assigned to 5 dietary treatments following a randomized complete block design. Each treatment was replicated 4 times with 10 pigs per pen. The dietary treatments were designated as : A-diet containing 170 ppm Cu from $CuSO_4$ and 120 ppm Zn from $ZnSO_4$, B-diet containing 85 ppm Cu from Cu-amino acid chelate (CAC) and 60 ppm Zn from Zn-amino acid chelate (ZAC), C-diet containing 170 ppm Cu from CAC and 120 ppm Zn from ZAC, D-diet containing 85 ppm Cu from Cu-lysine complex (CL) and 60 ppm Zn from Zn-methionine complex (ZM), and E-diet containing 170 ppm Cu from CL and 120 ppm Zn from ZM. On the other trial, 144 of one day old broiler chicks were randomly distributed to 6 dietary treatments following a completely randomized design. Each treatment was replicated 3 times with 8 chicks per replicate. The dietary treatments were as follows: 1-diet with 60 ppm Cu from $CuSO_4$ and 40 ppm Zn from $ZnSO_4$, 2-diet with 120 ppm Cu from $CuSO_4$ and 80 ppm Zn from $ZnSO_4$, 3-diet with 60 ppm Cu from CAC and 40 ppm Zn from ZAC, 4-diet with 120 ppm Cu from CAC and 80 ppm Zn from ZAC, 5-diet with 60 ppm Cu from CL and 40 ppm Zn from ZM, and 6-diet with 120 ppm Cu from CL and 80 ppm Zn from ZM. In Exp. 1 with pigs, there was no difference on average daily gain and average daily feed intake observed among treatments. There was improvement (p<0.05) on the overall feed conversion ratio (FCR) of pigs fed diet containing 120 ppm Zn and 170 ppm Cu from metal-amino acid chelates relative to those fed diet containing inorganic sources of Cu and Zn but equally efficient as those fed diet containing metal-amino acid complexes. Pigs fed diet containing either metal-amino acid chelates or complexes as sources of Cu and Zn had higher (p<0.05) Cu and Zn concentration in serum and lower (p<0.05) in feces than those receiving diet with inorganic sources. In Exp. 2 with broiler chicks, the overall FCR was not different among treatments. Higher (p<0.05) Cu and Zn concentration in serum was obtained from birds fed diet with 60 ppm Cu and 40 ppm Zn from metal-amino acid chelates compared to those fed diet with inorganic sources of Cu and Zn. Also, the feces collected from birds fed diet with either metal-amino acid chelates or complexes contained generally lower Cu and Zn than those birds fed diet with inorganic sources. The higher the dietary level of Cu and Zn the higher the Cu and Zn concentration in the feces. Based on the results, both metal-amino acid chelates and complexes of Cu and Zn at low levels (Zn 60 ppm, Cu 85 ppm for weanling pigs and Zn 40 ppm, Cu 60 ppm for broiler chicks) are not different from that of high levels of inorganic sources in maintaining growth performance and serum concentration. The fecal excretions for Cu and Zn were greatly reduced when organic sources were used.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.2 s.314
• /
• pp.37-46
• /
• 2007

In this paper, we propose technologies for enhancing the immersive realization of virtual objects in AR-based product design. Generally, multimodal senses such as visual/auditory/tactile feedback are well known as a method for enhancing the immersion in case of interaction with virtual objects. By adapting tangible objects we can provide touch sensation to users. A 3D model of the same scale overlays the whole area of the tangible object so the marker area is invisible. This contributes to enhancing immersion. Also, the hand occlusion problem when the virtual objects overlay the user's hands is partially solved, providing more immersive and natural images to users. Finally, multimodal feedback also creates better immersion. In our work, both vibrotactile feedback through page motors, pneumatic tactile feedback, and sound feedback are considered. In our scenario, a game-phone model is selected, by way of proposed augmented vibrotactile feedback, hands occlusion-reduced visual effects and sound feedback are provided to users. These proposed methodologies will contribute to a better immersive realization of the conventional AR system.