• 제목/요약/키워드: 2D/2D matching

검색결과 1,025건 처리시간 0.031초

패널굴절방식 환기창 온실의 환기효과 (Ventilation Effect of the Greenhouse with Folding Panel Type Windows)

  • 김진영;이시영;김현환;전희;윤익학
    • 생물환경조절학회지
    • /
    • 제11권1호
    • /
    • pp.5-11
    • /
    • 2002
  • 본 연구는 여름 같은 고온기나 외부온도가 높지 않아도 시설내 온도가 많이 상승하는 봄 .가을 같은 시기에 온실내 고온 공기를 외부로 신속하게 유출시켜 강제환기를 사용하지 않고도 온실내부의 환경을 조절 할 수 있는 새로운 자연 환기창을 개발하는데 목적을 두고 수행하였다 패널굴절방식 측창은 지면에 가까운 쪽의 패널 하부에 절점을 두고 패널 상부가 측고 부위로부터 가이드 레일을 따라 하향하도록 구성하여 창이 개방되게 하였고, 천창은 측고 부위에 절점을 두고 용마루 쪽의 패널 상부가 가이드 레일을 따라 경사진 지붕면을 따라 하향하도록 구성하여 고온 공기층이 정체되어 있는 온실 상부인 측고 부위와 용마루 부위가 개방되도록 하였다. 굴절 패널의 상부 개방거리는 X=L(1-cos$\theta$)로 나타낼 수 있고 측면 개방 거리는 Y=L/2$\times$sin$\theta$로 나타낼 수 있다. 천창 개방시간은 4분 20초 소요되었으며 개방 시작한 2분 후부터 온도가 하강하기 시작하였고, 완전 개방 2분 후부터는 외기온과의 온도차 3~4$^{\circ}C$정도를 유지하면서 평형상태를 유지하였다. 패널굴절방식 환기창 온실의 환기성능은 체적환기량이 22.3-94.3m$^3$.m$^{-2}$ .h$^{-1}$이었으며, 환기 횟수는 15.2~39.3회.h$^{-1}$로 나타나 일반적인 연속형 천창의 10~15회.h$^{-1}$ 정도에 비해 환기효과가 높은 것으로 나타났다. 그리고 벤로형 온실과의 천창개폐시 온도하강을 비교하였을 때 환기효과가 2배 이상 높은 것으로 판단되었다.$_{r}$", $\mu$$_{r}$′) and the dielectric loss ($\varepsilon$$_{r}$"/$\varepsilon$$_{r}$′) were increased. It was caused that the absorption characteristics of the absorber were improved. The conduction loss and magnetic loss were expected to be occurred together because two matching frequencies were shown with carbon addition. It was confirmed that the matching frequency of the microwave absorber could be controlled by controlling heat-treatment temperatures and carbon additions.ons.tions.加的)으로 되거나 과가황(過加黃)이 될 우려가 있는 제조공정(製造工程)에서는 흔히들 이 방법(方法)을 무시(無視)하고 있다. 여기서 강조(强調)해 두어야 할 것은 항상 제품(製品)의 외부(外部)를 완전(完全)히 가황(加黃)시킬 필요(必要)는 없다는 것이다. 다공성(多孔性)이나 기포생성(氣泡生成)을 조장(助長)하는 불량가황상태(不良加黃狀態)와 표면(表面)에서의 과가황상태간(過加黃狀態間)의 균형(均衡)을 취(取)해 줘야 하는데 물론(勿論) 이때는 가황시간(加黃時間)을 단축(短縮)시켜야 한다는 경제적(經濟的)인 측면(側面)도 아울러 고려(考慮)해야 한다

CCD기반의 방사선치료 중 실시간 자동 환자 위치보정 시스템 개발: 타당성 연구 (The Development of Real Time Automatic Patient Position Correction System during the Radiation Therapy Based on CCD: A Feasibility Study)

  • 신동호;정광주;김미영;손재만;윤명근;임영경;이세병
    • 한국의학물리학회지:의학물리
    • /
    • 제24권3호
    • /
    • pp.191-197
    • /
    • 2013
  • 방사선 치료 시 방사선이 조사되는 동안 환자의 움직임을 모니터링하는 것은 치료의 성공을 결정 하는 중요한 요인이다. 따라서 방사선이 조사되는 동안 환자의 움직임을 실시간으로 감시하고 움직인 치료위치를 자동으로 보정 할 수 있는 시스템을 개발 하였다. 원점을 중심으로 직교하게 위치한 2개의 CCD 카메라를 이용하여 3차원적 환자의 위치를 확인 하고, 틀 맞춘 상호교차 비교법(normalized cross-correlation method)을 이용한 영상 본 맞춤(image pattern matching) 방법을 이용한 환자위치 모니터링 시스템을 개발하였다. CCD카메라로부터 촬영된 영상을 컴퓨터로 전달하여 위치 변화를 정량적으로 분석 하여 빔 켜고 끔(beam on and off)를 위한 방아쇠신호(trigger signal)를 발생시키고, 이동치료대(moving couch)의 모터를 제어할 수 있는 시스템을 개발하였다. 이 시스템은 0.5 mm 이하의 분해능으로 환자의 위치를 자동으로 보정할 수 있었다.

고강도 모르타르 충전식 철근이음의 구조성능에 관한 실험연구 (Structural Performance of High Strength Grout-Pilled Splice Sleeve System)

  • 김형기;안병익;남재현;박복만
    • 콘크리트학회논문집
    • /
    • 제13권5호
    • /
    • pp.516-524
    • /
    • 2001
  • 여러가지 철근이음 방법중에서 고강도 모르타르 충전식 철근이음은 철근위치의 오차를 쉽게 흡수하여 시공이 용이하고 또한 최근에 많이 사용되고 있는 대구경 철근에 대해서도 적용성이 양호하기 때문에 프리캐스트 공법의 철근이음 방법으로 매우 유효한 수단이 된다. 이에 본 연구에서는 모르타르 충전식 철근이음법의 적용범위를 보다 확장하기 위하여 슬리브에 매입되는 철근직경이 상이한 경우와 충전 모르타르 강도를 700kgf/$\textrm{cm}^2$대로 낮춘 경우의 모르타르 충전식 철근이음에 대한 단조 및 반복가력 구조성능 실험을 실시한 후에 기존 실험결과와의 비교 분석을 통하여 다음과 같은 결론을 얻었다. 충전 모르타르 압축강도가 증가할수록 전체적인 구조성능은 증가하는 경향을 나타내었고 충전 모르타르 압축강도가 700kgf/$\textrm{cm}^2$이상이고 철근정착길이가 6.5d 이상이면 A급(AIJ 철근이음 성능 판정기준) 이상의 구조성능을 보유하고 있는 것이 확인되었다. 또한 슬리브 양단에 매입되는 철근의 직경이 상이한 경우는 굵은 철근에 대응되는 슬리브를 사용해야 하고 매입되는 가는 철근은 굵은 철근보다 2단계까지 가는 것을 사용할 수 있다는 것이 확인되었다.

지르코니아 코아가 전부도재관의 색조에 미치는 영향에 대한 분광측색분석 (SPECTROPHOTOMETRIC ANALYSIS OF THE INFLUENCE OF ZIRCONIA CORE ON THE COLOR OF CERAMIC)

  • 배아란;백진;우이형;김형섭;최대균
    • 대한치과보철학회지
    • /
    • 제43권4호
    • /
    • pp.466-477
    • /
    • 2005
  • Statement of problem : Problem of matching the appearance of porcelain restorations with the patient's natural dentition has always been a concern to dental clinicians. Recently, demands for esthetics, even in restorations requiring strength, has brought a revolution to dentistry and increased use of zirconia. Among the various factors, shade and translucency or the core can significantly affect the overall esthetics of the restoration and should be considered when selecting an all-ceramic system. Purpose : The purpose of this study was to spectrophotometrically evaluate the influence of different zirconia systems and core thickness on the final shade of all-ceramic restorations using the CIEL$^*a^*b^*$ system. Material and Methods: Core specimens (n : 20 per group) of In-Ceram Alumina, In-Ceram Zirconia, Digident CAD/CAM Zirconia, Cercon Zirconia were fabricated 20mm in diameter. 10 specimens of each group were fabricated at core thickness of 0.5mm and 0.7mm. These core specimens were veneered with shade Al & A3 porcelain of the recommended manufacturer. CIEL$^*a^*b^*$ coordinates were recorded for each specimen with a spectrophotometer (Model CM-2600d, Minolta, Japan). Color differences were calculated using the equation ${\Delta}E^*=[({\Delta}L^*)^2+({\Delta}a^*)^2+({\Delta}b^*)^2]^{\frac{1}{2}}$. Results : 1. Specimens of core thickness 0.5mm and 0.7mm did not exhibit clinically perceived color difference. 2. Regarding shade reproducibility, In-Ceram Alumina and In-Ceram Zirconia showed significant difference within each group. 3. Cercon Zirconia group showed the highest $L^*$ value and Digident Zirconia group showed lowest $a^*$ & $b^*$ value. 4. Generally the shade difference between materials was higher in the A3 shade group than in the Al shade group. Conclusion: Within the limitations of this study, there was no color difference after increase in core thickness and every all-ceramic system has color characteristics that clinicians have to consider when selecting materials. Also, manufacturers of different porcelain systems must make every effort to achieve color reproducibility.

사회문제 해결형 기술수요 발굴을 위한 키워드 추출 시스템 제안 (A Proposal of a Keyword Extraction System for Detecting Social Issues)

  • 정다미;김재석;김기남;허종욱;온병원;강미정
    • 지능정보연구
    • /
    • 제19권3호
    • /
    • pp.1-23
    • /
    • 2013
  • 융합 R&D가 추구해야 할 바람직한 방향은 이종 기술 간의 결합에 의한 맹목적인 신기술 창출이 아니라, 당면한 주요 문제를 해결함으로써 사회적 니즈를 충족시킬 수 있는 기술을 개발하는 것이다. 이와 같은 사회문제 해결형 기술 R&D를 촉진하기 위해서는 우선 우리 사회에서 주요 쟁점이 되고 있는 문제들을 선별해야 한다. 그런데 우선적이고 중요한 사회문제를 분별하기 위해 전문가 설문조사나 여론조사 등 기존의 사회과학 방법론을 사용하는 것은 참여자의 선입견이 개입될 수 있고 비용이 많이 소요된다는 한계를 지닌다. 기존의 사회과학 방법론이 지닌 문제점을 보완하기 위하여 본 논문에서는 사회적 이슈를 다루고 있는 대용량의 뉴스기사를 수집하고 통계적인 기법을 통하여 사회문제를 나타내는 키워드를 추출하는 시스템의 개발을 제안한다. 2009년부터 최근까지 3년 동안 10개 주요 언론사에서 생산한 약 백 30만 건의 뉴스기사에서 사회문제를 다루는 기사를 식별하고, 한글 형태소 분석, 확률기반의 토픽 모델링을 통해 사회문제 키워드를 추출한다. 또한 키워드만으로는 정확한 사회문제를 파악하기 쉽지 않기 때문에 사회문제와 연관된 키워드와 문장을 찾아서 연결하는 매칭 알고리즘을 제안하다. 마지막으로 사회문제 키워드 비주얼라이제이션 시스템을 통해 시계열에 따른 사회문제 키워드를 일목요연하게 보여줌으로써 사회문제를 쉽게 파악할 수 있도록 하였다. 특히 본 논문에서는 생성확률모델 기반의 새로운 매칭 알고리즘을 제안한다. 대용량 뉴스기사로부터 Latent Dirichlet Allocation(LDA)와 같은 토픽 모델 방법론을 사용하여 자동으로 토픽 클러스터 세트를 추출할 수 있다. 각 토픽 클러스터는 연관성 있는 단어들과 확률값으로 구성된다. 그리고 도메인 전문가는 토픽 클러스터를 분석하여, 각 토픽 클러스터의 레이블을 결정하게 된다. 이를 테면, 토픽 1 = {(실업, 0.4), (해고, 0.3), (회사, 0.3)}에서 토픽 단어들은 실업문제와 관련있으며, 도메인 전문가는 토픽 1을 실업문제로 레이블링 하게 되고, 이러한 토픽 레이블은 사회문제 키워드로 정의한다. 그러나 이와 같이 자동으로 생성된 사회문제 키워드를 분석하여 현재 우리 사회에서 어떤 문제가 발생하고 있고, 시급히 해결해야 될 문제가 무엇인지를 파악하기란 쉽지 않다. 따라서 제안된 매칭 알고리즘을 사용하여 사회문제 키워드를 요약(summarization)하는 방법론을 제시한다. 우선, 각 뉴스기사를 문단(paragraph) 단위로 세그먼트 하여 뉴스기사 대신에 문단 세트(A set of paragraphs)를 가지게 된다. 매칭 알고리즘은 각 토픽 클러스터에 대한 각 문단의 확률값을 측정하게된다. 이때 토픽 클러스터의 단어들과 확률값을 이용하여 토픽과 문단이 얼마나 연관성이 있는지를 계산하게 된다. 이러한 과정을 통해 각 토픽은 가장 연관성이 있는 문단들을 매칭할 수 있게 된다. 이러한 매칭 프로세스를 통해 사회문제 키워드와 연관된 문단들을 검토함으로써 실제 우리 사회에서 해당 사회문제 키워드와 관련해서 구체적으로 어떤 사건과 이슈가 발생하는 지를 쉽게 파악할 수 있게 된다. 또한 매칭 프로세스와 더불어 사회문제 키워드 가시화를 통해 사회문제 수요를 파악하려는 전문가들은 웹 브라우저를 통해 편리하게 특정 시간에 발생한 사회문제가 무엇이며, 구체적인 내용은 무엇인지를 파악할 수 있으며, 시간 순서에 따른 사회이슈의 변동 추이와 그 원인을 알 수 있게 된다. 개발된 시스템을 통해 최근 3년 동안 국내에서 발생했던 다양한 사회문제들을 파악하였고 개발된 알고리즘에 대한 평가를 수행하였다(본 논문에서 제안한 프로토타입 시스템은 http://dslab.snu.ac.kr/demo.html에서 이용 가능함. 단, 구글크롬, IE8.0 이상 웹 브라우저 사용 권장).

Advanced Design of Birdcage RF Coil for Various Absorption Regions at 3T MRI System

  • Lee, Jung-Woo;Choe, Bo-Young;Choi, Chi-Bong;Huh, Soon-Nyoung
    • 한국자기공명학회논문지
    • /
    • 제9권1호
    • /
    • pp.48-60
    • /
    • 2005
  • Purpose: The purpose of this study was to design and build an optimized birdcage resonator configuration with a low pass filter, which would facilitate the acquisition of high-resolution 3D-image of small animals at 3T MRI system. Methods and Materials: The birdcage resonator with 12-element structures was built, in order to ensure B1 homogeneity over the image volume and maximum filling factor, and hence to maximize the signal to noise ratio (SNR) and resolution of the 3-dimensional images. The diameter and length of each element of a birdcage resonator were as follows: (1) diameter 13 cm, length 22 cm, (2) diameter 15 cm, length 22 cm, (3) diameter 17 cm, length 25 cm. Spin echo pulse sequence and fast spin echo pulse sequence were employed in obtaining MR images. The quality of the manufactured birdcage resonators wes evaluated on the basis of the return loss following matching and tuning process. Results: The experimental MR image of phantoms by the various manufactured birdcage resonators were obtained to compare the SNR in accordance with the size of objects. The size of an object to that of coil was identified by parameters that were estimated from the image of a phantom. First, the diameter of the birdcage resonator was 15cm, and the ratio of the tangerine to the birdcage resonator accounted for approximately 27%. The Q factor was 53.2 and the SNR was 150.7. Second, at the same birdcage resonator, the ratio of the orange was approximately 53%. The SNR and the Q parameter was 212.8 and 91.2, respectively. Conclusion: The present study demonstrated that if birdcage resonators have the same forms, SNR could be different depending on the size of an object, especially when the size of an object to that of coil is approximately 40~80%, the former is bigger than the latter. Therefore, when the size of an object to be observed is smaller than that of coil, the coil should be manufactured in accordance with the size of an object in order to obtain much more excellent images.

  • PDF

Survival Benefit of Perioperative Chemotherapy in Patients with Locally Advanced Gastric Cancer: a Propensity Score Matched Analysis

  • Eom, Bang Wool;Kim, Sohee;Kim, Ja Yeon;Yoon, Hong Man;Kim, Mi-Jung;Nam, Byung-Ho;Kim, Young-Woo;Park, Young-Iee;Park, Sook Ryun;Ryu, Keun Won
    • Journal of Gastric Cancer
    • /
    • 제18권1호
    • /
    • pp.69-81
    • /
    • 2018
  • Purpose: It has been reported that the survival of patients with locally advanced gastric cancer (LAGC) is better in East Asia countries than in developed western countries; however, the prognosis of LAGC remains poor. This study aimed to evaluate the effects of perioperative chemotherapy on the long-term survival of East Asia patients with LAGC. Materials and Methods: From October 2006 through August 2008, 43 patients with LAGC received perioperative S-1 combined with weekly docetaxel in a phase II study (neoadjuvant group). These patients were matched using propensity scores to patients who underwent surgery without neoadjuvant chemotherapy during the same period (surgery group). The surgical outcomes and long-term survivals were compared between the 2 groups. Results: After matching, 43 and 86 patients were included in the neoadjuvant and surgery groups, respectively, and there was no significant difference in their baseline characteristics. Although the operating time was longer in the neoadjuvant group, there was no significant difference in postoperative complications between the 2 groups. The neoadjuvant group had a significantly higher 5-year overall survival (OS) rate (73.3% vs. 51.1%, P=0.005) and a trend towards higher 5-year progression-free survival (PFS) (62.8% vs. 49.9%, P=0.145). In the multivariate analysis, perioperative chemotherapy was an independent factor for OS, with a hazard ratio of 0.4 (P=0.005) and a marginal effect on the PFS (P=0.054). Conclusions: Perioperative chemotherapy was associated with better long-term survival without increasing postoperative complications in the setting of D2 surgery for patients with LAGC, suggesting that perioperative chemotherapy can be a therapeutic option in East Asia countries.

$^{99m}TC-HMPAO$ SPECT를 이용한 정상인 국소뇌혈류의 정량적 분석 (Normal Control Study of Cerebral Blood Flow by Tc-99m HM-PAO SPECT)

  • 문대혁;이범우;이경한;최윤호;정준기;이명철;고창순;윤병우;이남수;노재규;명호진;궁성수
    • 대한핵의학회지
    • /
    • 제23권2호
    • /
    • pp.155-163
    • /
    • 1989
  • Regional cerebral perfusion was evaluated in 15 normal controls by single photon emission computed tomography using $^{99m}Tc$ HM-PAO. For quantitative analysis, 13 pairs of homologous region of interest (ROI) were drawn on three transverse slices matching the vascular territories and cerebral cortices, and normal values of 3 semiqunatitative indices including 'Right to left ratio'(R/L ratio), 'Regional index'(RI), and 'Region to cerebellum ratio'(R/cbll ratio) were calculated. Mean values of R/L ratios of homotogous regions were ranged from 0.985 to 1.023, and mean ${\pm}2$ s.d. of all regions did not exceed 11% of mean. Significant difference of RIs (mean count per voxel of a ROI/mean count per voxel of total ROIs) between regions were found (p<0.001) with highest values in occipital cortex and cerebellum. After attenuation correction, RIs in deep gray, cranial portion of anterior cerebral artery and vascular territories in the 2nd slice increased significantly (p < 0.05-0.001), but vise versa in other ROIs. Region to cerebellum ratios also showed regional difference similar to RIs.

  • PDF

뇌 PET과 MR 영상의 자동화된 3차원적 합성기법 개발 (Development of an Automatic 3D Coregistration Technique of Brain PET and MR Images)

  • 이재성;곽철은;이동수;정준기;이명철;박광석
    • 대한핵의학회지
    • /
    • 제32권5호
    • /
    • pp.414-424
    • /
    • 1998
  • 목적: PET과 MR 영상을 체계적으로 합성i분석하여 각각의 영상기법이 갖는 단점을 보완하고 기능을 향상시킴으로써 보다 정확하고 유용한 임상정보를 얻을 수 있다. 두 영상을 공간적으로 합성하기 위해서 머리 표피 경계점들 간의 거리를 최소화하는 알고리즘을 이용할 경우 경계점 추출의 정확성 및 견실성과 거리 계산 속도가 합성 알고리즘의 성능을 결정하는 중요한 요소가 된다. 본 연구에서는 PET 영상의 경계 추출과 거리 계산 방법을 개선하고 이를 이용하여 PET과 MR 영상을 3차원적으로 합성하였다. 대상 및 방법: 공간적인 합성을 위한 영상처리기법의 핵심인 경계점 추출을 위해 PET영상에서는 방출스캔 sinogram의 경계를 강조한 후 재구성한 횡단면으로부터 2 mm 간격으로 머리 표피 경계점들을 추출하였으며 MR 영상에서는 각 횡단면마다 약 2도 간격으로 경계점들을 추출하였다. 두 영상의 모든 경계점들 간의 평균 유클리디안 거리를 최소화하는 3차원 가상공간 상에서의 위치 이동과 회전 각도를 최소자승법을 이용하여 구한 후 PET영상을 역 전환하여 위치 정합을 하였다. 평균 거리의 계산 속도를 향상시키기 위하여 고정된 대상의 각 경계점을 중심으로 하여 주변 공간 정들에서의 거리를 순차적으로 계산하고 이들의 최소값을 취하는 방법으로 거리지도를 구성하였으며 최소자승법에서 경계점들 간의 위치가 변할 때마다 매번 평균거리를 다시 계산하지 않고 거리지도를 참조하여 평균 거리를 산출하는 방법을 사용하였다. 위치 정합된 두 영상의 동시 표현을 위하여 PET 영상의 화소값에 $0.4{\sim}0.7$부터 1사이의 범위로 정규화된 MR 영상의 화소 값으로 가중치를 주는 가중정규화 방법을 사용하였다. 결과: 방출스캔의 sinogram을 이용함으로써 PET영상의 경계를 견실하게 추출할 수 있었으며, 거리지도를 이용하여 거리 계산을 한 결과 계산 속도를 향상시킬 수 있었다. 정상인의 뇌영상에 대해 위치 정합을 실시한 결과 평균 거리 오차는 2mm 이하였다. 가중정규화 방법을 사용하였을 때 합성된 영상의 정성적인 식별 명확도가 향상하였다. 결론: 견실한 PET 영상 경계점 추출과 거리지도를 이용한 계산 속도의 향상을 통해 뇌 PET과 MR 영상 합성기법의 성능을 개선할 수 있었으며 이를 이용하며 개발한 영상정합 프로그램은 임상 환경에서 유용하게 사용될 수 있을 것이다.

  • PDF

Tc-99m HMPAO와 Tc-99m ECD 뇌SPECT의 뇌혈류량 정량화에 사용되는 Linearization Algorithm의 Correction Factor 조사 (Optimization of Correction Factor for Linearization with Tc-99m HM PAO and Tc-99m ECD Brain SPECT)

  • 조인호;;원규장;이형우
    • Journal of Yeungnam Medical Science
    • /
    • 제16권2호
    • /
    • pp.237-243
    • /
    • 1999
  • 연구목적: 연구목적: $^{99m}Tc$ d,l-hexamethylpropyleneamine oxime(HMPAO)와 $^{99m}Tc$ ethyl cysteinate dimer(ECD)의 뇌세포에 의한 섭취는 뇌혈류량에 비례를 한다. 그러나 뇌혈류량이 아주 높은 경우에는 뇌세포에 의한 섭취가 그 만큼 증가를 하지 않기 때문에 뇌혈류량이 과소평가 될 수 있다. 이를 보안하기 위하여 Lassen이 linearization algorithm을 만들었다. 그러나 이 방정식은 뇌의 상태에 따라 사용되는 알파값으로 표현되는 변수가 변할 수 있다. 저자들은 뇌경색이 있는 10명의 환자를 대상으로 가장 적절한 ${\alpha}$값을 구하고자 하였다. 재료 및 방법: 10명의 환자들은 모두 0.1에서 10까지의 알파값을 이용하여 교정한 $^{99m}Tc$-HMPAO와 $^{99m}Tc$-ECD 뇌관류 단일광자방출 단층촬영(single photon emission computed tomography: SPECT) 영상을 구하고, 양전자방출단층촬영술로 뇌혈류영상을 구하였다. 그리고 상호정보의 최대화에 의한 multi-modal volume registration을 이용하는 컴퓨터프로그램으로 양전자방출단층촬영술로 구한 뇌혈류와 SPECT 영상에서 다양한 알파값을 대입하여 Lassen의 linearization algorithm으로 구한 뇌혈류값을 픽셀단위로 서로 비교하였다. 결과: Lassen의 linearization algorithm을 이용하여 구한 $^{99m}Tc$-HMPAO와 $^{99m}Tc$-ECD 뇌관류 SPECT의 국소 뇌혈류량은 알파값이 각각 1.4와 2.1일때 양전자방출전산화단층촬영술로 구한 뇌혈류량과의 상관관계가 가장 높았다. 결론: Lassen의 linearization algorithm을 이용하여 뇌혈류량을 정량화하는 경우에는 $^{99m}Tc$-HMPAO의 경우는 1.4, $^{99m}Tc$-ECD의 경우는 2.1을 사용할 때 뇌혈류량을 가장 잘 반영할 것으로 생각된다.

  • PDF