• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.21-26
• /
• 2004

Characteristics of laminar lifted names in coflow jet with various coflow velocities have been studied experimently. USlI1g the fuel nozzle with d=0.254 for the pure propane, liftoff heights are fitted by using power equation with jet velocity. As coflow velocity increases up to 60 cm/s powers of fitting equation steeply decrease. From the result of numerical analysis using the FLUENT, the stoichiometry contour and the axial velocity nondimensionalized by initial jet velocity along the stoichiometry contour are changed with variations of coflow velocities, The change of axial velocity along stoichiometric contour is more sensitive than that of stoichiometric contour, For this reason, powers of fitting equation for liftoff height with jet velocity decreases with the increase of coflow velocity. Using the fuel nozzle with d=4,35 mm for the highly diluted propane by nitrogen, the liftoff height increases with the increase of coflow velocity when coflow velocity is less than the maximum value of initial jet velocity. But when coflow velocity is faster than that, the liftoff height decreases with the increase of coflow velocity.

• 상하수도학회지
• /
• 제11권2호
• /
• pp.94-104
• /
• 1997

Ozone Treatment is getting a common process in a water treatment plant all over the nation. Especially an advanced water treatment using ozone and biofiltration has been a typical method in the regions where using the Nak-Dong River as a drinking water source. The effectiveness of ozone treatment in a continuous flow contact system was investigated with sand filtered water of the Nak-dong River. Pilot tests of the experiments were performed three times of the year like June, August, and October 1995. Most degradable organics of sand filtered water were oxidized in the first and second contact chamber of the system. Ozone treatment was effective for the removal of UV254 absorbance. However, Noticeable removals of $KMnO_4$ demand and TOC(Total Organic Carbon) were occurred when their concentrations exceeded about 5mg/l. The organics causing $KMnO_4$ demand and TOC were degraded into lower molecular matter in an early stage of the ozone contact in the system. Dissolved oxygen concentration was increased after ozone treatment.

• 한국통신학회논문지
• /
• 제13권3호
• /
• pp.239-254
• /
• 1988

현대 통신에서 혼신방지및 보안유지를 위한 방법으로 ECCM기법이 개발되었다. 주파수 도약방식은 이러한 기법중의 하나이며 RF변조된 신호를 일정한 대역폭내에서 빠르게 움직여 신호의 추적을 어렵게 만드는 방법이다. 본 논문에서는 1.25MHz-800Hz의 FM변조된 기준 신호와 LO(Local Oscillator)에 의해 30-80MHz의 FM출력을 얻을 수 있는 PLL-Exciter를 구성하였다. Exciter의 LO로는 42.5-100.5 MHz에서 도약시킬 수 있는 주파수 합성기를 사용하였다.

• 한국환경보건학회지
• /
• 제24권2호
• /
• pp.38-46
• /
• 1998

The purpose of this study is to evaluate and compare the effective coagulation of commercial humic acid which is well known as major precursor of trihalomethane, with LAS and PAC and to quantify the residual aluminum in the treated water. Then the optimum pH, the dosage of coagulant were determined. 1. Humic acid concentrati6n, UV absorbance and color were well correlated and UV absorbance(254 nm) and color seem to be used in quntificative analysis of humic acid of same kind. 2. Optimal dosage of LAS and PAC increase as humic acid concentration increases. And optimal pH range for coagulation using LAS is pH 5.5-7.0 and pH 3.5-6.5 for PAC. Within these ranges the removal efficiency is 90-99%. 3. The results of quantification of residual aluminum in treated water shows that minimal aluminum remains on the optimal coagulation condition. But the residual aluminum increses as the dosage of coagulant is beyond the optimal range. Thus the dosage of coagulant should be chosen with the condition on which humic acid removal is maximum and the residual aluminum concentration is minimum. 4. In the water treatment process the raw water pH range is 6.5-8.0, and it seems to be possible to remove humic acid by charge neutralization not by sweep floc. But it should be considered that different commercial humic acids have different physical and chemical characteristics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.254-255
• /
• 2005

In this paper, we investigated electrical characteristics of the X-ray detector of mercuric iodide (HgI2) film fabricated by PIB(Particle-in-Binder) Method on ITO substrates 17cm$\times$20cm in size with thicknesses ranging from approximately 200${\mu}m$ to 240${\mu}m$. In the present study, using I-V measurements, their electrical properties such as leakage current, X-ray sensitivity, and signal-to-noise ratio (SNR),were investigated. The results of our study can be useful in the future design and optimization of direct active-matrix flat-panel detectors (AMFPD) for various digital X-ray imaging modalities.

• 디자인학연구
• /
• 제14권
• /
• pp.245-254
• /
• 1996

형태와 기능은 디자인의 조형적인 실체를 파악하는 주요 요소일 뿐만 아니라 사물의 존재를 결정짓는 기본요소이다. 그러므로 디자인에서 제기하는 모든 문제들의 접근은 결국 형태와 기능의 문제해결이고, 아울러 이에 따른 구체적인 조형창출이다. 그러나 디자인조형에서 형태와 기능에 관한 내용은 그 중요성에 비해 아직까지 심층적인 접근이나 충분한 지식·이론체계의 정립이 미흡하다. 이와 같은 관점에서, 본 연구에서는 형태와 기능을 대상으로 이들의 본질적인 개념과 내면적인 실체, 그리고 관련되는 제반의 의미적인 유형들을 체계적이고 종합적인 차원에서 연구·고찰한다. 아울러 형태와 기능의 상호관계를 몇 가지 주요 측면에서 다각적으로 해석·규명한다. 본 연구를 통해 얻어진 결과는 디자인조형 분야의 새로운 학문적인 체계를 구축하는 데에는 물론이고, 오늘날 디자인에서 각별히 요망되고 있는 새로운 조형사고 및 조형기술을 개발하는데 다소나마 기여하게 될 것이다.

• 한국물환경학회지
• /
• 제23권6호
• /
• pp.881-888
• /
• 2007

In order to investigate the characteristics of the non-biodegradable material, the $BOD_5/COD_{Cr}$ ratio was used. The average ratio of industrial complex's influent wastewater was 2.29~2.96, the effluent ratio was 4.29~19.0. The removal efficiency of $UV_{254}$ by physicochemical treatment was 22.8~94.7% and 5.3~77.2% by biological treatment, respectively. Of the wastewater removal efficiency for each of the items, the $BOD_5$ treatment efficiency was the greatest at 97.3% and the color & TN treatment efficiency was 40~70%. The study of the economical assessment showed that the complex as well as the individual companies spent 722~1,298 won for each ton of treated wastewater. All of the wastewater treatment facilities spent the most money on chemicals needed to treat the wastewater. The total cost for Nylon manufacturing wastewater treatment plant was the greatest while the total cost for cotton manufacturing wastewater treatment plant turned out to the lowest. As respects of removal efficiency and economocal assessment, Polyester A and Cotton manufacturing wastewater treatment plants were better effective than a dyeing industrial complex wastewater treatment plant.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제34권3호
• /
• pp.246-254
• /
• 2007

국지적 탐색 알고리즘들은 최적해를 찾기 위해서 이웃해를 생성하여 평가한 뒤에 좋은 해로 이동하는 과정을 반복한다. 본 논문에서는 생성된 이웃해를 원래의 목적함수로 평가하기 전에 간단한 예비 평가 휴리스틱을 이용하여 미리 평가함으로써, 좋지 않아 보이는 이웃해를 확률적으로 여과할 수 있는 기법을 소개한다. 이 확률적 여과 기법은 결국에 버려질 이웃해를 엄밀하게 평가하는데 낭비되는 시간을 절약하고, 이 시간 동안 보다 좋아 보이는 이웃해를 더 많이 탐색할 수 있게 함으로써 탐색 효율을 높이는 기법이다. 대규모의 실세계 최적화 문제인 교통망에서의 교통 신호 최적화 문제와 작업 일정 계획에서의 부하평준화 문제를 대상으로 한 실험에서 확률적 여과를 적용한 경우가 적용하지 않은 경우에 비해 주어진 탐색시간 동안 더 좋은 질의 최적해를 얻을 수 있는 것으로 확인되었다.

• 한국수산과학회지
• /
• 제16권3호
• /
• pp.247-254
• /
• 1983

In previous paper (Lee and Kim, 1983) the effect of moisture level and frequency on dielectric properties of sardine starch paste was mentioned. The effect of temperature and starch content of the paste upon dielectric permittivity and activation energy was discussed in this report. Addition of starch affected on dielectric property. Increases of starch in the mixtures resulted in higher complex permittivity and lower critical moisture content (hc) as shown in the mixtures with $20\%$ and $50\%$ starch which were ${\varepsilon}^{\ast}=2.97+j0.36,\;hc=8.0\%;\;{\varepsilon}^{\ast}=3.54+j0.44,\;hc=7.8\%$, respectively while being ${\varepsilon}^{\ast}=2.73+j0.29,\;hc=8.4\%$ for the plain ground sardine meat. When temperature was raised the complex permittivity tended to increase at above the critical moisture content in all cases. The activation energies for plain ground meat and $30\%$ starch added mixture at below the critical moisture of $8.4\%$ were 15.44 kcal/mol and 13.86 kcal/mol while those at the moisture of $12.2\%$ were 10.27 kcal/mol and 9.31 kcal/mol, respectively.

• 한국환경보건학회지
• /
• 제34권3호
• /
• pp.247-254
• /
• 2008

Non-point source pollution that originates from surface applied chemicals in either liquid or solid form is a part of urban activities and it appears in the surface runoff caused by rainfall. This study investigates the characteristics of non point source pollution in relation to storm events and the first washing effect in the Study area, which is comprised of different land use types. Then, a Best Management Practices (BMP) model, for urban areas, is applied with the Storm water Management Model (SWMM) Windows Interface which was developed by the EPA in the USA. During the storm event analysis of the hydrographic and pollutographic data showed that the peak of pollutants concentration was within the peak flow, 30 to 60 minute into the storm event in the Study area. The results of simulation using SWMM Windows Interface, Structure Techniques as applied in the study were highly efficient for removal of pollutants. Predicted removal efficiency was 26.0% for SS, 22.1 for BOD, 24.1% for COD, 20.6% for T-N, and 21.6% for T-P, respectively.