• Food Science of Animal Resources
• /
• v.36 no.1
• /
• pp.29-36
• /
• 2016

This study was performed to investigate the role of pH and temperature postmortem, and to demonstrate the importance of these factors in determining meat quality. Postmortem pH_45min (pH at 45 min postmortem or initial pH) via analysis of Pearson’s correlation showed high positive correlation with pH change pH_c24 (pH change from pH_45min to pH_24h postmortem). However, postmortem pH after 24 h (pH_24h or ultimate pH) had a high negative correlation with pH change, pH_c24, CIE L*, and protein content. Initial temperature postmortem (T_1h ) was positively associated with a change in temperature from 45 min to 24 h postmortem (T_c24) and cooking loss, but negatively correlated with water holding capacity. Temperature at 24 h postmortem (T_24h) was negatively associated with T_c24. Collectively, these results indicate that higher initial pH was associated with higher pH_c24, T_1h, and T_c24. However, higher initial pH was associated with a reduction in carcass weight, backfat thickness, CIE a* and b*, water holding capacity, collagen and fat content, drip loss, and cooking loss as well as decreased shear force. In contrast, CIE a* and b*, drip loss, cooking loss, and shear force in higher ultimate pH was showed by a similar pattern to higher initial pH, whereas pH_c24, carcass weight, backfat thickness, water holding capacity, fat content, moisture content, protein content, T_1h, T_24h, and T_c24 were exhibited by completely differential patterns (p<0.05). Therefore, we suggest that initial pH, ultimate pH, and temperatures postmortem are important factors in determining the meat quality of pork.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.2
• /
• pp.279-282
• /
• 2002

Twenty six male Hanwoo (Korean cattle) carcasses were measured for pH, temperature and instrumental color changes of loins during 24 h post-mortem carcass chilling at $4^{\circ}C$ in the cooler. The average internal temperature of loins was about $5^{\circ}C$ after 24 h of chilling, and with the exclusion of those with an ultimate pH>6.0 (dark-cutters), the average pH value was 5.5. When all carcasses were considered for the partial correlation coefficient between color and pH, with the temperature effect excluded, CIE $L^*$, $a^*$ and $b^*$ seemed to be affected significantly by pH during chilling process (p<0.001). However, when carcasses with dark-cutting condition were excluded, the correlation coefficients were much lower. In contrast, when the partial correlation coefficients between color and temperature, excluding the effect of pH on them, were analyzed, the relationship between color and temperature did not change much after values of DFD (dark, firm, dry) beef were excluded. The results suggested that the known interrelationship of color and pH in chilled beef loins be mainly due to the influence of temperature on pH and color.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.2
• /
• pp.381-389
• /
• 2004

To investigate changes of multi-purpose solutions for soft contact lens(MPS) depending on using period or keeping temperature, we evaluate four brands of MPS. No significant difference was seen in protein deposit removing efficacy after samples had used for 24 weeks and kept at $4^{\circ}C$, $20^{\circ}C$ or $30^{\circ}C$. The pH values of the samples of 4 brands measured weekly over the 24 week testing period. The initial average pH value of samples were 7.0, 7.5, 7.6 or 8.2. One brand of MPS was in the range of the threshold for ocular awareness, which is outside the zone of 6.6 ~ 7.8. During the testing period, the pH value were decreased in using period-dependent manner. At the 24th week, the average pH values of samples turned to 6.6, 7.2, 7.2 or 7.7. However, the difference of keeping temperature was not associated with decreased levels of pH values. After 24 weeks, one of total 36 samples was contaminated by bacteria. Furthermore, the change of components was shown after 24 weeks in the analysis using thin layer chromatography and the analysis of UV absorption pattern. The results of our study provides that the keeping temperature of MPS is not the important factor of changes of MPS, but the using period of MPS can cause contact lens wearers discomfort.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.5
• /
• pp.701-710
• /
• 2019

Objective: This study investigated the effect of different acute heat stress (HS) levels on chicken meat quality and ultra-structure. Methods: Chickens were randomly divided into 7 groups to receive different HS treatments: i) $36^{\circ}C$ for 1 h, ii) $36^{\circ}C$ for 2 h, iii) $38^{\circ}C$ for 1 h, iv) $38^{\circ}C$ for 2 h, v) $40^{\circ}C$ for 1 h, vi) $40^{\circ}C$ for 2 h, and vii) un-stressed control group ($25^{\circ}C$). Blood cortisol level, breasts initial temperature, color, pH, water holding capacity (WHC), protein solubility and ultra-structure were analyzed. Results: HS temperatures had significant effects on breast meat temperature, lightness ($L^*$), redness ($a^*$), cooking loss and protein solubility (p<0.05). The HS at $36^{\circ}C$ increased $L^*{_{24h}}$ value (p<0.01) and increased the cooking loss (p<0.05), but decreased $a^*{_{24h}}$ value (p<0.05). However, as the temperature increased to $38^{\circ}C$ and $40^{\circ}C$, all the values of $L^*{_{24h}}$, cooking loss and protein denaturation level decreased, and the differences disappeared compared to control group (p>0.05). Only the ultimate $pH_{24h}$ at $40^{\circ}C$ decreased compared to the control group (p<0.01). The pH in $36^{\circ}C$ group declined greater than other heat-stressed group in the first hour postmortem, which contributed breast muscle protein degeneration combining with high body temperature, and these variations reflected on poor meat quality parameters. The muscle fiber integrity level in group $40^{\circ}C$ was much better than those in $36^{\circ}C$ with the denatured position mainly focused on the interval of muscle fibers which probably contributes WHC and light reflection. Conclusion: HS at higher temperature (above $38^{\circ}C$) before slaughter did not always lead to more pale and lower WHC breast meat. Breast meat quality parameters had a regression trend as HS temperature raised from $36^{\circ}C$. The interval of muscle fibers at 24 h postmortem and greater pH decline rate with high body temperature in early postmortem period could be a reasonable explanation for the variation of meat quality parameters.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.43-49
• /
• 2016

Reliability characteristics of thin package-on-packages were evaluated using T/H (temperature/humidity) test at $85^{\circ}C/85%$ for 500 hours, TC (temperature cycling) test at $-40{\sim}100^{\circ}C$ for 1,000 cycles, and HTS (high temperature storage) test at $155^{\circ}C$ for 1,000 hours. The average resistance of the solder-bump circuitry between the top and bottom packages of 24 package-on-package (PoP) samples, which were processed using polyimide thermal tape, was $0.56{\pm}0.05{\Omega}$ and quite similar for all 24 samples. Open failure of solder joints did not occur after T/H test for 500 hours, TC test for 1,000 cycles, and HTS test for 1,000 hours, respectively.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2006.05a
• /
• pp.90-93
• /
• 2006

Our results indicate that muscle temperature and glycolysis rate of pre-rigor could be closely related to Hanwoo beef tenderness at 24 h postmortem and have potential to predict beef tenderness at 24 h postmortem.

• Journal of Embryo Transfer
• /
• v.18 no.2
• /
• pp.85-90
• /
• 2003

This study examined the viability of canine oocytes following storage at 4 or 38$^{\circ}C$ for 5 h. Cumulus intact oocytes were collected from domestic dog following ovariohysterectomy at local veterinary clinics. In Exp I, the oocytes that collected from ovary transport different temperatures (4 or 38$^{\circ}C$) for 5 h, were cultured for (24 or 48 h). Survivability of oocytes judged by morphological appearance and PI (propidium iodide) staining. The survival rates at 4$^{\circ}C$ ovary transport group showed significantly lower than control group (0%; 0/129 vs. 72.9%; 129/177) 48 h after culture (P<0.05). In Exp II, to assess nuclear maturation of control group oocytes (ovary transported at 38$^{\circ}C$) after in vitro cultured for 24, 48 or 96 h. After 24 h and 48 h of culture, the metaphase I to metaphase II stages (MI to MII) was 8.3% (6/72) and 8.9% (9/101), and which was not increased at 96h (9.5%; 8/84). These results show that canine oocytes remarkably sensitive to low temperature and the percentage of oocytes reaching MI to MII did not increase 96 h after culture.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.5
• /
• pp.752-757
• /
• 1995

The effect of fermentation temperature on the changes of pH, acidity, salt content, color and vitamin C of mustard leaf kimchi during various storage days was investigated. The conditions of fermentation temperature were set at $4^{\circ}C$ (sample A) and $20^{\circ}C$ (sample B), and $4^{\circ}C$ after keeping at $20^{\circ}C$ for 12 hours(sample C) and $20^{\circ}C$ for 36 hours(sample D). As the fermentation proceeded, pH of sample stored at low temperature(sample A) was drop ped gradually from initial pH of 5.24 but there was great pH drop in the sample stored at high temperature(sample B, D). The salt content of the sample B at high temperature increased remarkably, and then the values showed D > A > C. The Humter values of L and a increased at the optimum ripening period, the higher the initial fermentation temperature(B) and the later the initial fermentation time at $20^{\circ}C$ those values, then decreased. The Hunter value of b constantly increased until day of 108. As fermentation time passed, the content of total vitamin C decreased to the range of 9.0mg% to 14.0mg% up to 24 days of fermentation, and at the optimum ripening period, it increased to the range of 14.0mg% to 22.0mg%, and at the fermentation period(until day 108), it decreased gradually.

• Journal of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.145-153
• /
• 1973

The temperature effects on the equilibria between polymolybdatd anions in 1M sodium perchlorate solution has been investigated in the temperature range of 20~50$^{\circ}$C. The polymolybdate anions formed are heptamolybdate ($Mo_7O_{24}^{6-}$) ions and the protonized forms of heptamolybdate ions ($H_LMo_7O_{24}^{(6-L)-}$). The equilibrium constants for the formation of heptamolybdate ions calculated by Sillen's method are as follow;$8H^{+}+7MoO_4^{2-}=Mo_7O_{24}^{6-}+4H_2O$, $k_{7.8}=2.77{\times}10^{53}:20^{\circ}C= 9.29{\times}10^{51}:40^{\circ}C$,$k_{7.8}= 4.22{\times}10^{52}:30^{\circ}C = 9.29{\times}10^{51}:50^{\circ}C$ The enthalpy change for calculated for the above reaction is 31.51 kcal/mole. A method of calculation of the equilibrium constants for the formation of protonized heptamolybdate ions from heptamolybdate ions and hydrogen ions has been derived. The equilibrium constants calculated for the formation of protonized heptamolybdate ions are as follow; $ LH^++ Mo_7O_{24}^{-6} = H_LMo_7O_{24}^{(6-L)-} : L = 1\;or\;2$, $k_1 = 2.31{\times}10^4=2.53{\times}10^4=2.76{\times}10^4= 3.10{\times}10^4$, $k_2 = 6.19{\times}10^7\;20^{\circ}C = 7.80{\times}10^7\;30^{\circ}C = 1.22{\times}10^8\;40^{\circ}C = 2.03{\times}10^8\;50^{\circ}C$The enthalpy change for the following step reactions are as follow;$H^{+}+Mo_7O_{24}^{6-}= HMo_7O_{24}^{5-}\;{\Delta}H^{\circ}=1.90 kcal/mole$, $2H^{+}+Mo_7O_{24}^{6-}=H_2Mo_7O_{24}^{4-}\;{\Delta}H^{\circ}=7.50kcal/mole$

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.322-324
• /
• 2007

Nd:YAG laser welding of AZ31B-H24 magnesium alloy was carried out using AZ61 filler wire(Mg-6wt%Al-1wt%Zn). Microstructure and mechanical properties of welded joint were examined by optical microscopy, scanning electronic microscopy(SEM), energy dispersive spectroscopy(EDS), electron probe micro analyzer(EPMA) and victors hardness, tensile test at the room and elevated temperature. Test results indicate that the specimens welded with AZ61 filler wire have better tensile strength, elongation and victors hardness at room temperature than those of welded without filler wire. However tensile strength are similar but elongation are quite different at elevated temperature.