• Earthquakes and Structures
• /
• v.4 no.5
• /
• pp.557-585
• /
• 2013

The recent huge earthquake ground motion records in Japan result in the reconsideration of seismic design forces for nuclear power stations from the view point of seismological research. In addition, the seismic design force should be defined also from the view point of structural engineering. In this paper it is shown that one of the occurrence mechanisms of such large acceleration in recent seismic records (recorded in or near massive structures and not free-field ground motions) is due to the interaction between a massive building and its surrounding soil which induces amplification of local mode in the surface soil. Furthermore on-site investigation after earthquakes in the nuclear power stations reveals some damages of soil around the building (cracks, settlement and sand boiling). The influence of plastic behavior of soil is investigated in the context of interaction between the structure and the surrounding soil. Moreover the amplification property of the surface soil is investigated from the seismic records of the Suruga-gulf earthquake in 2009 and the 2011 off the Pacific coast of Tohoku earthquake in 2011. Two methods are introduced for the analysis of the non-stationary process of ground motions. It is shown that the non-stationary Fourier spectra can detect the temporal change of frequency contents of ground motions and the displacement profile integrated from its acceleration profile is useful to evaluate the seismic behavior of the building and the surrounding soil.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.143-151
• /
• 2012

The tsunami disasters and tectonic movements derived from mega-earthquake(M 9.0) which occured in the sea floor of the Pacific side of northeast Japan in March, 2011 were investigated. Landward invasion limit of the tsunami was 4.0km from the present coastline in Sendai coastal plain. It was observed that sandy deposit was dristributed largely in coastward part and muddy deposit was distributed largely in landward part. The ratios of distribution distances of the above two deposits were, respectively, 60~75% and 25~40% of the whole invasion distance of the 2011 tsunami. The ratios of the above distribution distances of tsunami deposits could be used to estimate landward invasion distances of the past maga-tsunamies(e.g. '2,000year B.P. Mega-Tsunami' and 'Jogan Tsunami' etc.) in Sendai coastal plain. The mega-scale tsunami disasters were caused by the low and flat geomorphic condition in the Sendai coastal plain and the increasing effect of tsunami height affected by narrow inlet condition of the so-called Ria's coast in the Sanriku coastal area respectively. Tectonic subsidences caused by the mega-earthquake in march, 2011 were observed in many areas of Ishinomaki, Ogawa, Ogachi and Onagawa coasts in northeast Japan. The displacements of tectonic subsidence were between 0.5 meters and 1.0 meters.

• Geophysics and Geophysical Exploration
• /
• v.19 no.2
• /
• pp.84-90
• /
• 2016

The validation of performance test for newly developed or old-used sensor is very important in the earthquake monitoring and seismology using earthquake data. Especially the frequency response of the sensor is mainly used to correct the earthquake data. The technique of the calculation of phase and amplitude with Hilbert transformation for earthquake data that is filtered with band limited frequency in time domain is applied to calculate the frequency response of the sensor. This technique was tested for the acceleration sensors, CMG-5T of 1g and 2g installed on the vibration table at the laboratory and we could obtain satisfactory result. Tohoku large earthquake in 2011 observed at the station SNU that has accelerometer, ES-T and seismometer, STS-2 operated by KIGAM was also used to test the field data applicability. We could successfully get the low frequency response of broad band sensor, STS-2. The technique by using band limited frequency filter and Hilbert transformation showed the superior frequency response to the frequency spectrum ratio method for noisy part in data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.477-484
• /
• 2012

Recently, as earthquake is more frequently taking place around the world due to diastrophism, the importance of diastrophism and disaster detection is becoming more important. In this study, to analyze the interpretation of seismic displacement by the Japanese earthquake in March, 2011, and monitor the diastrophism of plates in Japan and surrounding Eurasia, Pacific, and Philippines before and after the earthquake, the observational data from IGS observatories in Japan and Asian regions were processed by precise point positioning. The displacement was biggest in MIZU, which was the closest to the epicenter, and the earthquake-affected region was in inverse proportion to the distance from the epicenter. The result of calculating the diastrophism speed before and after the earthquake, based on precise point positioning of IGS observatories located in the 4 plates around Japan, showed that the displacement speed changed and different plates showed different results. The comparison with the plate fate model allowed to analyze the change in diastrophism by earthquake, and to understand the characteristics of the displacement of the plates around Japan. Later, a continuous diastrophism monitoring based on GPS is needed for earthquake prediction and diastrophism research, and the data gained by continuous GPS-based monitoring of diastrophism will be fully used as basic data for relevant research and earthquake disaster management.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.87-96
• /
• 2012

The U.S. Geological Survey (USGS) announced that an earthquake of 9.0 magnitude had occurred near the east coast of Japan on March 11, 2011, resulting in a displacement of the crust of about 2.4 meters. The Korean peninsula is located on the Eurasian tectonic plate that stretches out to Japan; therefore, there is a high possibility of being affected by an earthquake. The Korean GPS CORS network operated by the National Geographic Information Institute (NGII) was processed for ten days before and after the earthquake. Both static and kinematic baseline processing were tested for the determination of crustal deformation. The static baseline processing was performed in two scenarios: 1) fixing three IGS stations in China, Mongolia and Russia; 2) fixing SUWN, one of the CORS networks in Korea, in order to effectively verify crustal deformation. All data processing was carried out using Bernese V5.0. The test results show that most of the parts of the Korean peninsula have moved to the east, ranging 1.2 to 5.6 cm, compared to the final solution of the day before the earthquake. The stations, such as DOKD and ULLE that are established on the islands closer to the epicenter, have clearly moved the largest amounts. Furthermore, the station CHJU, located on the southwestern part of Korea, presents relatively small changes. The relative positioning between CORS confirms the fact that there were internal distortions of the Korean peninsula to some extent. In addition, the 30-second interval kinematic processing of CORS data gives an indication of earthquake signals with some delays depending on the distance from the epicenter.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.165-175
• /
• 2022

Earthquakes have occurred owing to movements on a fault since several billion years ago. Research on the relationship between earthquakes and groundwater began in the 1960s in the United States, but related works, including hydrogeochemistry research, only began in the 2010s in South Korea. In this study, domestic studies on the relationship between earthquakes and groundwater until 2021 were collected from the Web of Science and characterized by subject area (groundwater level, hydrogeochemistry, combination of the two, and others). The results showed that the number of published articles per year was positively correlated with the 2011 Tohoku earthquake, 2016 Gyeongju earthquake, and 2017 Pohang earthquake, with the maximum numbers observed in 2011, 2018, 2019, and 2020. Most studies on the relationship between earthquakes and groundwater level addressed groundwater level fluctuations in the duration of the subject earthquake, with little consideration of the precursors. Groundwater level monitoring data, as well as hydrogeochemical information and microbial communities, may contribute to a more detailed understanding of groundwater flow and chemical reactions in bedrock caused by earthquakes. Therefore, the establishment of a national groundwater monitoring network for seismic monitoring and prediction is required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.662-671
• /
• 2020

It is crucial to manage and maintain the geodetic reference coordinates of GNSS continuously operating reference stations (CORSs) in consideration of their fundamental roles in geodetic control and positioning navigation infrastructure. Earthquake-induced crustal displacement directly impacts the reference coordinates, so such events should be promptly detected, and appropriate action should be made to maintain the target accuracy, including update of the geodetic coordinates. To this end, this paper deals with online schemes for the detection of persistent shifts in the coordinate time-series produced by an automatic GNSS processing system. Algorithms were implemented to test filtered results, such as hypothesis tests of the innovation sequence of a Kalman filter and a cumulative sum (CUSUM) test. The results were assessed by the time-series of coordinates of 14 CORS for two years, including the 2011 Tohoku earthquake. The results show that the global hypothesis test is practical for detecting abrupt jumps, whereas CUSUM is effective for identifying persistent shifts.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.6
• /
• pp.386-393
• /
• 2013

After the 2011 Tohoku Earthquake, it has been pointed out that Tokai, Tonankai and Nankai massive earthquakes with a magnitude of 9.0 could strike the Pacific coasts in western Japan. This study aims at investigating numerically propagation characteristics of tsunami generated by a 9.0 magnitude Tokai, Tonankai and Nankai massive earthquakes on the Pacific coasts and three major bays in Japan, Tokyo Bay, Ise Bay and Osaka Bay. It was revealed from the numerical results that the tsunami heights on the Pacific coasts for M9.0 earthquake were about twice as much as those for M8.7 earthquake and the first tsunami arrival time was faster at some areas distant from the tsunami source. Moreover, high water level in the bays was recognized to continue for a long time because of the enclosed bays.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.644-654
• /
• 2024

After the Tohoku earthquake and tsunami (Japan, 2011), regulatory efforts to mitigate external hazards have increased both the safety requirements and the total capital cost of nuclear power plants (NPPs). In these circumstances, identifying not only disaster robustness but also cost-effective capacity setting of NPPs has become one of the most important tasks for the nuclear power industry. A few studies have been performed to relocate the seismic capacity of NPPs, yet the effects of multiple hazards have not been accounted for in NPP capacity optimization. The major challenges in extending this problem to the multihazard dimension are (1) the high computational costs for both multihazard risk quantification and system-level optimization and (2) the lack of capital cost databases of NPPs. To resolve these issues, this paper proposes an effective method that identifies the optimal multihazard capacity of NPPs using a multi-objective genetic algorithm and the two-stage direct quantification of fault trees using Monte Carlo simulation method, called the two-stage DQFM. Also, a capacity-based indirect capital cost measure is proposed. Such a proposed method enables NPP to achieve safety and cost-effectiveness against multi-hazard simultaneously within the computationally efficient platform. The proposed multihazard capacity optimization framework is demonstrated and tested with an earthquake-tsunami example.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.2
• /
• pp.69-77
• /
• 2019

This study introduces MATLAB Graphical User Interface (GUI)-based software to monitor ionospheric disturbances. This software detects ionospheric disturbances using Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) measurements, and estimates a location of the disturbance source through the detected disturbance. In addition, this software includes a sky plot making function and frequency analysis function through wavelet transform. To evaluate the performance of the developed software, data of 2011 Tohoku earthquake in Japan were analyzed by using the software. The analysis results verified that the ionospheric disturbances were detected through GPS and GLONASS measurements, and the location of the disturbance source was estimated through the detected disturbance.