• 제목/요약/키워드: 20,\

검색결과 140,119건 처리시간 0.089초

Ta20Nb20V20W20Ti20 하이엔트로피 합금의 미세조직 및 기계적 특성에 미치는 밀링 시간의 영향 (Effect of Milling Time on the Microstructure and Mechanical Properties of Ta20Nb20V20W20Ti20 High Entropy Alloy)

  • 송다혜;김영겸;이진규
    • 한국분말재료학회지
    • /
    • 제27권1호
    • /
    • pp.52-57
    • /
    • 2020
  • In this study, we report the microstructure and characterization of Ta20Nb20V20W20Ti20 high-entropy alloy powders and sintered samples. The effects of milling time on the microstructure and mechanical properties were investigated in detail. Microstructure and structural characterization were performed by scanning electron microscopy and X-ray diffraction. The mechanical properties of the sintered samples were analyzed through a compressive test at room temperature with a strain rate of 1 × 10-4 s-1. The microstructure of sintered Ta20Nb20V20W20Ti20 high-entropy alloy is composed of a BCC phase and a TiO phase. A better combination of compressive strength and strain was achieved by using prealloyed Ta20Nb20V20W20Ti20 powder with low oxygen content. The results suggest that the oxide formed during the sintering process affects the mechanical properties of Ta20Nb20V20W20Ti20 high-entropy alloys, which are related to the interfacial stability between the BCC matrix and TiO phase.

생분해성 고분자 나노복합체의 형태학 및 기계적 특성 연구 (A Study on Morphology and Mechanical Properties of Biodegradable Polymer Nanocomposites)

  • 장상희
    • 청정기술
    • /
    • 제19권4호
    • /
    • pp.401-409
    • /
    • 2013
  • 폐플라스틱에 의한 환경오염 증가로 생분해성 고분자에 대한 관심이 커지고 있다. 본 연구에서는 생분해성 고분자인 폴리 L-락타이드(polylactic acid, PLA)와 폴리 L-락타이드(polylactic acid, PLA)/폴리 부틸렌 숙신산(polybutylene succinate, PBS)(90/10)수지를 기지재료로 하고 유기 크로사이트(cloisite ) 20을 나노 클레이(clay) 20으로 사용하여 이축압출기에서 Clay-20 함량별 로 압출시켜 나노복합체를 제조하였다. 사출성형기로 사출성형시편을 제조하여 나노복합체의 열적, 기계적, 형태학적 및 라만 분광학 특성을 시차열량분석기(differential scanning calorimeter, DSC), 인장시험기, 주사전자현미경(scanning electron microcopy, SEM), 라만-현미경 분광광도계로 조사하였고, 또한 가수분해특성을 조사하였다. 시차열량분석기와 주사전자현미경 시험 결과에서 PLA/Clay-20과 PLA/PBS/Clay-20 나노복합체의 결정화도가 Clay-20 함량이 증가함에 따라 증가하였고, Clay-20과 PLA 및 PLA/PBS 수지가 서로 상용성이 있는 것으로 확인되었다. 또한 Clay-20 함량이 증가함에 따라 두 나노복합체의 인장강도는 감소하지만 신도, 충격강도, 인장탄성률 및 굴곡탄성률이 증가하였다. 특히 Clay-20이 5 wt% 첨가된 PLA/Clay-20과 PLA/PBS/Clay-20 나노복합체의 충격강도는 순수 PLA와 PLA/PBS (90/10) 보다 2배 이상으로 증가하였다. Clay-20 3 wt% 첨가된 PLA/Clay-20 나노복합체의 가수분해속도는 순수 PLA 가수분해속도보다 두 배 정도 빨랐다. 이는 유기화 처리된 Clay-20 나노입자 표면의 친수성으로 계면에서 가수분해가 쉽게 일어나기 때문인 것으로 판단된다. 본 연구에서 적당량의 Clay-20 첨가로 PLA의 기계적특성 개선과 생분해 특성 조절 가능성을 확인하였다.

인삼의 Protopanaxadiol계 사포닌으로부터 20(R)-Ginsenoside $Rh_2$ 및 20(S) 이성체의 제조 (Preparation of a 20(R)-Ginsenoside $Rh_2$ and the 20(S) Epimer from Protopanaxadiol Saponins of Panax ginseng C.A. Meyer)

  • 김신일;백남인;김동선;이유희;강규상;박종대
    • 약학회지
    • /
    • 제35권5호
    • /
    • pp.432-437
    • /
    • 1991
  • A mixture of 20(R)- and 20(S)-ginsenoside Rg$_{3}$ was obtained under mild acidic hydrolysis from protopanaxadiol saponins, ginsenosides Rb$_{1}$, Rb$_{2}$, Rc and Rd. The product was acetylated to give the peracetates, which were further converted into 20(R)-ginsenoside Rg$_{3}$, 20(S)-ginsenoside Rg$_{3}$, 20(R)-ginsenoside Rh$_{2}$ and 20(S)-ginsenoside Rh$_{2}$ by the direct alkaline treatment depending upon two kinds of temperature conditions respectively. The structure and physicochemical properties of a prosapogenin, 20(R)-ginsenoside Rh$_{2}$, were investigated.

  • PDF

Progesterone의 이화(異化)효소, 20α-hydroxysteroid dehydrogenase의 활성 및 활용에 관한 연구 1. 20α-hydroxysteroid dehydrogenase의 활성 및 혈청 progesterone 농도의 변화 (Activity and application of 20α-hydroxysteroid dehydrogenase in rat 1. Changes in activities of 20α-hydroxysteroid dehydrogenase and serum progesterone concentration)

  • 강정부;곽수동
    • 대한수의학회지
    • /
    • 제34권4호
    • /
    • pp.867-872
    • /
    • 1994
  • Progesterone catabolizing enzyme, the enzyme $20{\alpha}$-hydroxysteroid dehydrgenase($20{\alpha}$-HSD) is pivotal in the regulation of ovarian function in rodents, which catabolizes progesterone into biologically inactive $20{\alpha}$-hydroxypregn-4-en-3-one($20{\alpha}$-OHP). In this study was carried out the influence of $20{\alpha}$-HSD activity of ovarian function, we investigated changes in ovarian cytosol $20{\alpha}$-HSD activity and serume progesterone concentration during the estrous cycles and pregnancy in rat. During the estrous cycles, the $20{\alpha}$-HSD activities were highest on the progestrous, but serum progesterone concentration was lowest on this phase. During the pregnancy, the $20{\alpha}$-HSD activities were relatively higher early pregnancy(day-1-3 gestation) and late pregnancy(day 21 to parturition), serum progesterone concentration was maintained significantly high to day 19 of gestation. The $20{\alpha}$-HSD activities were lower during the middle pregnancy. From these results, ovarian $20{\alpha}$-HSD activities may possibly act as physiologically very important in the control and maintenance of estrous cycles in rat.

  • PDF

Complete $^1H$-NMR and $^{13}C$-NMR spectral analysis of the pairs of 20(S) and 20(R) ginsenosides

  • Yang, Heejung;Kim, Jeom Yong;Kim, Sun Ok;Yoo, Young Hyo;Sung, Sang Hyun
    • Journal of Ginseng Research
    • /
    • 제38권3호
    • /
    • pp.194-202
    • /
    • 2014
  • Background: Ginsenosides, the major ingredients of Panax ginseng, have been studied for many decades in Asian countries as a result of their wide range of pharmacological properties. The less polar ginsenosides, with one or two sugar residues, are not present in nature and are produced during manufacturing processes by methods such as heating, steaming, acid hydrolysis, and enzyme reactions. $^1H$-NMR and $^{13}C$-NMR spectroscopic data for the identification of the less polar ginsenosides are often unavailable or incomplete. Methods: We isolated 21 compounds, including 10 pairs of 20(S) and 20(R) less polar ginsenosides (1-20), and an oleanane-type triterpene (21) from a processed ginseng preparation and obtained complete $^1H$-NMR and $^{13}C$-NMR spectroscopic data for the following compounds, referred to as compounds 1-21 for rapid identification: 20(S)-ginsenosides Rh2 (1), 20(R)-Rh2 (2), 20(S)-Rg3 (3), 20(R)-Rg3 (4), 6'-O-acetyl-20(S)-Rh2 [20(S)-AcetylRh2] (5), 20(R)-AcetylRh2 (6), 25-hydroxy-20(S)-Rh2 (7), 25-hydroxy-20(S)-Rh2 (8), 20(S)-Rh1 (9), 20(R)-Rh1 (10), 20(S)-Rg2 (11), 20(R)-Rg2 (12), 25-hydroxy-20(S)-Rh1 (13), 25-hydroxy-20(R)-Rh1 (14), 20(S)-AcetylRg2 (15), 20(R)-AcetylRg2 (16), Rh4 (17), Rg5 (18), Rk1 (19), 25-hydroxy-Rh4 (20), and oleanolic acid 28-O-b-D-glucopyranoside (21).

감나무의 휴면정도 및 저온에 따른 내동성 비교 (Freezing Hardiness According to Dormancy Level and Low Temperature in Persimmon (Diospyros kaki))

  • 김호철;배강순;배종향;김태춘
    • 생물환경조절학회지
    • /
    • 제16권3호
    • /
    • pp.269-273
    • /
    • 2007
  • 감나무의 휴면 정도에 따른 내동성을 비교하고자 '부유', '상서조생', '서촌조생', 갑주백목', '청도반시' 등의 1년생 가지를 1월 20일, 2월 20일, 3월 20일에 각각 채취하여 -5, -10, -15, -20, -25 및 $-30^{\circ}C$ 등으로 처리한 후 전해질 누출률, TTC 검정 및 눈의 발아율을 조사하였다. 전해질 누출률은 1월 20일의 가지에서 가장 낮았고, 3월 20일의 가지에서 가장 높았다. '부유'라 '청도반시' 가지의 전해질 누출률은 1월 20일에서 높았고 2월 20일에는 낮았으며, '상서조생'과 '서촌조생'은 반대의 경향이었고, '갑주백목'은 중간 정도 수준이었다. TTC 검정을 통한 흡광률은 1월 20일의 가지에서 가장 높았고, 2월 20일과 3월 20일의 가지에서는 낮았다. '부유'와 '상서조생' 가지의 흡광률은 1월 20일과 3월 20일에서 낮고 2월 20일에서는 높은 경향이었다. '서촌조생'과 '갑주백목'의 가지는 채취시기에 관계없이 높은 수준이었다. 눈의 발아율은 2월 20일의 가지에서 가장 높았고 3월 20일의 가지에서 낮았다. 그리고 대부분 품종의 발아율은 휴면정도에 관계없이 $-20^{\circ}C$ 처리에서 전혀 발아하지 않았다. '부유', '서촌조생' 및 '청도반시'의 가지는 휴면정도에 관계없이 비교적 높았지만 '상서조생'의 가지는 낮았다. '갑주백목'의 가지는 1월 20일에만 높은 수준이었다. 따라서 감나무의 내동성은 휴면 타파 후 가장 약하며, 떫은감과 단감 간 차이는 거의 없는 것으로 생각된다.

기내(器內) 대량(大量) 생산(生産) 반하(半夏) 종구(種球)의 포장(圃場) 재배기술(裁培技術) 연구(硏究) I. 파종시기(播種詩期)가 생육(生育)과 괴경형성(塊莖形成) 및 수량(收量)에 미치는 영향(影響) (Cultural Practices of In vitro Tuber of Pinellia ternata(Thunb.) Breit I. Effects of Planting Time on Growth, Tuber Formation and Yield)

  • 박호기;김태수;박문수;최인록;장영선;박근용
    • 한국약용작물학회지
    • /
    • 제1권2호
    • /
    • pp.109-114
    • /
    • 1993
  • 조직(組織) 배양(培養)을 통(通)하여 대량(大量) 생산(生産)된 반하(半夏) 종구(種球)의 포장재배(圃場裁培) 파종(播種) 적기(適期)를 구명(究明)하기 위하여 '90년(年) 4월(月) 20일(日), 5월(月) 20일(日), 6월(月) 20일(日), 7월(月) 20일(日), 8월(月) 20일(日) 및 9월(月) 20일(日)에 파종(播種)하여 출아특성(出芽特性), 생육특성(生育特性), 괴경형성(傀莖形成) 및 수량(收量)에 관련된 몇 가지 형질(形質)에 대하여 2개년간(個年間)$('90{\sim}'91)$ 검토(檢討)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 파종기별(播種期別) 출아소요기간(出芽所要期間)(파종(播種)${\sim}$출아(出芽))은 $9{\sim}26$일(日) 이었으며 파종기(播種期)가 빠른 4월(月) 20일(日)이 26일(日), 온도(溫度)가 높은 시기(時期)인 8월(月) 20일(日) 파종(播種)이 9일(日)로 가장 짧았으며 이 기간(期間)의 적산온도(積算溫度)는 $256{\sim}334^{\circ}C$이었다. 2. 파종기별(播種期別) 출아율(出芽率)은 $68{\sim}87%$로 대체로 좋았으나 7월(月) 20일(日) 파종(播種)은 고온(高溫) 및 한발(旱魃)의 영향(影響)으로 저조(低調) (55%)하였다. 3. 파종기별(播種期別) 재배기간중(栽培期間中)(2년(年)) 생육과정(生育過程)은 4월(月) 20일(日), 5월(月) 20일(日), 6월(月) 20일(日) 및 7월(月) 20일(日) 파종(播種)은 4회(回) 생육(生育)을, 8월(月) 20일(日)과 9월(月) 20일(日) 파종(播種)은 3회(回) 생육(生育)하였고, 총(總) 생육기간(生育期間)은 125일(日)${\sim}$239일(日)로 파종기(潘種期)가 빠를 수록 길었으며 9월(月) 20일(日) 파종(播種)은 125일(日)에 불과(不過)하였다. 4. 파종기별(潘種期別) 수확(收穫) 당시(當時)의 초장(草長), 괴경장(塊莖長) 및 괴경폭(塊莖幅)은 4월(月) 20일(日)${\sim}$6월(月) 20일(日) 파종(播種)은 큰 반면(反面) 7월(月) 20일(日) 이후(以後) 파종(播種)은 극히 적었으며 초장(草長)과 괴경장(塊莖長), 괴경폭(塊莖幅) 및 괴경수량(塊莖收量)과는 유의(有意) 상관(相關)이 인정(認定)되었다. 5. 파종기별(播種期別) 수확당시(收穫當時)의 $m^2$당(當) 주수(株數)는 5월(月) 20일(日)과 6월(月) 20일(日) 파종(播種)은 다른 파종기(播種期)에 비해 유의적(有意的)으로 많았으며(P<0.05) 7월(月) 20일(日) 이후(以後) 파종(播種)은 급멸(急滅)하였다. 6. 파종기별(播種期別) 생체수량(生體收量)은 4월(月) 20일(日) 파종(播種)(352kg/10a)에 비해 5월(月) 20일(日)이 9%(P<0.05), 6월(月) 20일(日)이 3% 증수(增收)하였고, 7월(月) 20일(日) 이하(以後) 파종(播種)은 $59{\sim}81%$까지 크게 감수(減收)하였으며 건물수량(乾物收量)도 같은 경향(傾向)이었다. 7. 파종기별(播種期訓) 상품가치(商品價値)가 있는 7.1mm이상(以上)의 괴경(塊莖)크기 분포(分布)는 5월(月) 20일(日) 파종(播種)이 322kg/10a, 6월(月) 20일(日) 파종(播種)이 299kg/10a으로 훨씬 많은 반면 7월(月) 20일(日)${\sim}$9월(月) 20일(日) 파종(播種)은 $55{\sim}117kg/10a$으로 극히 적었다. 8. 수량(收量)과 $m^2$당(當) 주수(株數)와는 고도(高度)의 상관(相關)$(r=0.992^{**})$이 인정(認定)되었으며 다수확(多收獲)을 위해서는 기내(器內) 생육(生産) 반하(半夏) 종구(種球)를 5월(月) 20일(日)${\sim}$6월(月) 20일(日)에 파종(播種)하는것이 가장 바람직하였다.

  • PDF

Precipitation Behavior of ${\gamma}"$ in Severely Plastic Deformed Ni-base Alloys

  • Kim, Il-Ho;Kwun, S.I.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.962-963
    • /
    • 2006
  • The precipitation behaviors of ${\gamma}"(Ni_3Nb)$ in four Ni-base alloys were investigated. The four alloys were forged Ni20Cr20Fe5Nb alloy, mechanically alloyed Ni20Cr20Fe5Nb alloy, IN 718 alloy and ECAPed(equal channel angular pressing) IN 718 alloy. Aging treatment was employed at either $600^{\circ}C$ or $720^{\circ}C$ for 20 hrs. The TEM observation and hardness test were performed to identify the formation of ${\gamma}"$. The precipitation of ${\gamma}"$ was noticed after aging at $600^{\circ}C$ for 20 hrs in the mechanically alloyed Ni20Cr20Fe5Nb alloy and ECAPed IN 718 alloy, while it was observed after aging at $720^{\circ}C$ for 20 hrs in the forged Ni20Cr20Fe5Nb alloy and IN 718 alloy before ECAP. The lower aging temperature for ${\gamma}"$ precipitation in the mechanically alloyed Ni20Cr20Fe5Nb alloy and ECAPed IN 718 alloy than in the forged Ni20Cr20Fe5Nb alloy and IN 718 alloy before ECAP appeared to be due to the severe plastic deformation which occurred during mechanical alloying or ECAP.

  • PDF

양송이에서 분리한 보체계와 대식세포 활성화 다당류의 구조적 특성 (Structural Characterization of the Anti-Complementary and Macrophage Activating Polysaccharides Isolated from Agaricus bisporus)

  • 김병희;권미향;임왕진;성하진;양한철
    • 한국식품과학회지
    • /
    • 제30권3호
    • /
    • pp.709-716
    • /
    • 1998
  • 양송이의 알칼리 추출물에서 면역계의 주요인자인보체계와 macrophage를 활성화시키는 다당들을 분리, 정제하고 구조적 특성을 비교하였다. AB-20-IVa-2는 항보체 활성과 macrophage 활성능을 동시에 나타내는 단백다당으로 주요 구성당은 glucose > galactose > mannose 순으로 함유되어 있고 주요 구성아미노산은 phenylalanine (34.72%)과 valine (27.84%)이었다. AB-20-Ia와 AB-20-IIa-2a는 macrophage 활성을 갖고 있는 순수다당으로 AB-20-Ia의 주요 구성당은 glucose > xylose > mannose이고 AB-20-IIa-2a는 xylose > glucose > mannose이었다. AB-20-Ia, AB-20-IIa-2a, AB-20-IVa-2의 분자량은 각각 84만, 75만, 65만 정도로 추정되었다. AB-20-Ia, AB-20-IIa-2a, AB-20-IVa-2의 구조적 특성을 비교하기 위하여 NMR 분석, methyl화 분석을 통해 anomer 배위 양식과 당쇄 결합 양식을 조사하였다. AB-20-Ia는 ${\beta}-anomer$ 형태로 존재하는데 비해서 AB-20-IIa-2a는 ${\alpha}-$${\beta}-anomer$ 모두 확인되었으며 ${\beta}-$의 비율이 좀 더 높았다. 또, AB-20-Ia와 AB-20-IIa-2a 모두 구성당 잔기에 acetyl기가 존재하였으며 특히, macrophage 활성능이 더 강한 AB-20-IIa-2a에 더 높은 비율로 함유되어 있었다. 이 정제 다당들의 당쇄 결합양식은 AB-20-Ia는 주로 ${\beta}-1,6-linked\;glucofuranosyl$ 잔기가 주쇄를 구성하고 있고, AB-20-IIa-2a는 1,6-linked glucopyranosyl 잔기가 주쇄를 이루고 여기에 측쇄들이 1,4 결합으로 연결된 다당으로 추정되었다. 또, AB-20-IVa-2는 1,2-linked xylofuranosyl 잔기와 1,6-linked glucopyranosyl 잔기가 주쇄를 이루고 이 xylofuranosyl 잔기에 측쇄들이 1,3 결합으로 연결된 다당으로 추정되었다.

  • PDF