• Journal of Powder Materials
• /
• v.27 no.1
• /
• pp.52-57
• /
• 2020

In this study, we report the microstructure and characterization of Ta₂₀Nb₂₀V₂₀W₂₀Ti₂₀ high-entropy alloy powders and sintered samples. The effects of milling time on the microstructure and mechanical properties were investigated in detail. Microstructure and structural characterization were performed by scanning electron microscopy and X-ray diffraction. The mechanical properties of the sintered samples were analyzed through a compressive test at room temperature with a strain rate of 1 × 10^-4 s^-1. The microstructure of sintered Ta₂₀Nb₂₀V₂₀W₂₀Ti₂₀ high-entropy alloy is composed of a BCC phase and a TiO phase. A better combination of compressive strength and strain was achieved by using prealloyed Ta₂₀Nb₂₀V₂₀W₂₀Ti₂₀ powder with low oxygen content. The results suggest that the oxide formed during the sintering process affects the mechanical properties of Ta₂₀Nb₂₀V₂₀W₂₀Ti₂₀ high-entropy alloys, which are related to the interfacial stability between the BCC matrix and TiO phase.

• Clean Technology
• /
• v.19 no.4
• /
• pp.401-409
• /
• 2013

BBiodegradable polymers have attracted great attention because of the increased environmental pollution by waste plastics. In this study, PLA (polylactic acid)/Clay-20 (Cloisite 20) and PLA (polylactic acid)/PBS (poly(butylene succinate)/Clay-20 (Cloisite 20) nanocomposites were manufactured in a twin-screw extruder. Specimens for mechanical properties of PLA/Clay-20 and PLA/PBS (90/10)/Clay-20 nanocomposites were prepared by injection molding. Thermal, mechanical, morphological and raman spectral properties of two nanocomposites were investigated by differential scanning calorimetry (DSC), tensile tester, scanning electron microscopy (SEM) and raman-microscope spectrophotometer, respectively. In addition, hydrolytic degradation properties of two nanocomposites were investigated by hydrolytic degradation test. It was confirmed that the crystallinity of PLA/Clay-20 and PLA/PBS/Clay-20 nanocomposite was increased with increasing Clay-20 content and the Clay-20 is miscible with PLA and PLA/PBS resin from DSC and SEM results. Tensile strength of two nanocomposites was decreased, but thier elongation, impact strength, tensile modulus and flexural modulus were increased with an increase of Clay-20 content. The impact strength of PLA/Clay-20 and PLA/PBS/Clay-20 nanocomposites with 5 wt% of Clay-20 content was increased above twice than that of pure PLA and PLA/PBS (90/10). The hydrolytic degradation rate of PLA/Clay-20 nanocomposite with 3 wt% of Clay-20 content was accelerated about twice than that of pure PLA. The reason is that degradation may occur in the PLA and Clay-20 interface easily because of hydrophilic property of organic Clay-20. It was confirmed that a proper amount of Clay-20 can improve the mechanical properties of PLA and can control biodegradable property of PLA.

• YAKHAK HOEJI
• /
• v.35 no.5
• /
• pp.432-437
• /
• 1991

A mixture of 20(R)- and 20(S)-ginsenoside Rg$_{3}$ was obtained under mild acidic hydrolysis from protopanaxadiol saponins, ginsenosides Rb$_{1}$, Rb$_{2}$, Rc and Rd. The product was acetylated to give the peracetates, which were further converted into 20(R)-ginsenoside Rg$_{3}$, 20(S)-ginsenoside Rg$_{3}$, 20(R)-ginsenoside Rh$_{2}$ and 20(S)-ginsenoside Rh$_{2}$ by the direct alkaline treatment depending upon two kinds of temperature conditions respectively. The structure and physicochemical properties of a prosapogenin, 20(R)-ginsenoside Rh$_{2}$, were investigated.

• Korean Journal of Veterinary Research
• /
• v.34 no.4
• /
• pp.867-872
• /
• 1994

Progesterone catabolizing enzyme, the enzyme $20{\alpha}$-hydroxysteroid dehydrgenase($20{\alpha}$-HSD) is pivotal in the regulation of ovarian function in rodents, which catabolizes progesterone into biologically inactive $20{\alpha}$-hydroxypregn-4-en-3-one($20{\alpha}$-OHP). In this study was carried out the influence of $20{\alpha}$-HSD activity of ovarian function, we investigated changes in ovarian cytosol $20{\alpha}$-HSD activity and serume progesterone concentration during the estrous cycles and pregnancy in rat. During the estrous cycles, the $20{\alpha}$-HSD activities were highest on the progestrous, but serum progesterone concentration was lowest on this phase. During the pregnancy, the $20{\alpha}$-HSD activities were relatively higher early pregnancy(day-1-3 gestation) and late pregnancy(day 21 to parturition), serum progesterone concentration was maintained significantly high to day 19 of gestation. The $20{\alpha}$-HSD activities were lower during the middle pregnancy. From these results, ovarian $20{\alpha}$-HSD activities may possibly act as physiologically very important in the control and maintenance of estrous cycles in rat.

• Journal of Ginseng Research
• /
• v.38 no.3
• /
• pp.194-202
• /
• 2014

Background: Ginsenosides, the major ingredients of Panax ginseng, have been studied for many decades in Asian countries as a result of their wide range of pharmacological properties. The less polar ginsenosides, with one or two sugar residues, are not present in nature and are produced during manufacturing processes by methods such as heating, steaming, acid hydrolysis, and enzyme reactions. $^1H$-NMR and $^{13}C$-NMR spectroscopic data for the identification of the less polar ginsenosides are often unavailable or incomplete. Methods: We isolated 21 compounds, including 10 pairs of 20(S) and 20(R) less polar ginsenosides (1-20), and an oleanane-type triterpene (21) from a processed ginseng preparation and obtained complete $^1H$-NMR and $^{13}C$-NMR spectroscopic data for the following compounds, referred to as compounds 1-21 for rapid identification: 20(S)-ginsenosides Rh2 (1), 20(R)-Rh2 (2), 20(S)-Rg3 (3), 20(R)-Rg3 (4), 6'-O-acetyl-20(S)-Rh2 [20(S)-AcetylRh2] (5), 20(R)-AcetylRh2 (6), 25-hydroxy-20(S)-Rh2 (7), 25-hydroxy-20(S)-Rh2 (8), 20(S)-Rh1 (9), 20(R)-Rh1 (10), 20(S)-Rg2 (11), 20(R)-Rg2 (12), 25-hydroxy-20(S)-Rh1 (13), 25-hydroxy-20(R)-Rh1 (14), 20(S)-AcetylRg2 (15), 20(R)-AcetylRg2 (16), Rh4 (17), Rg5 (18), Rk1 (19), 25-hydroxy-Rh4 (20), and oleanolic acid 28-O-b-D-glucopyranoside (21).

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.269-273
• /
• 2007

Freezing hardiness of winter bud and branch according to dormancy level and low temperature, in persimmon (Diospyros kaki) cultivars, was investigated by electrolyte leaching rate, triphenyltetrazolium chloride (TTC) test, and sprouting. Electrolyte leaching rate was lowest in branch of 20th January and was highest in the 20th March. The electrolyte leaching rate of 'Fuyu' and 'Cheongdobansi' was high in the 20th January and was low in the 20th February, but 'Uenishiwase' and 'Nishimurawase' was opposed to that. 'Hachiva' was the middle level in the cultivars. Absence rate by TTC test was highest in the 20th January and was low in the others. The 20th March had a great decrease in $-10^{\circ}C$ treatment. The absence rate of 'Fuyu' and 'Uenishiwase' was low in the 20th January and March and was high in the 20th February. 'Nishimurawase' and 'Hachiya' had a high level irrespective of dormancy level. Sprouting was highest in the 20th February and was lowest in 20th March. Most cultivars were not sprout in $-20^{\circ}C$ treatment and 'Fuyu', 'Nishimurawase' and 'Cheongdobansi' was a little high level irrespective of dormancy level. 'Hachiya' was only high in the 20th January. Thus, freezing hardiness of persimmon was very weak low temperature after dormancy breaking and was not different between astringent and non-astringent persimmon.

• Journal of Ginseng Research
• /
• v.15 no.3
• /
• pp.188-191
• /
• 1991

The mild hydrolysis of ginsenosie Re with 50% acetic acid gave a prosapogenin mixture, 20(R)- and 20(S)-ginsenoside Rg2. The products were acetylated to give the peracetates, which were further converted into 20(R)- and 20(S)-ginsenoside Rh1 by the alcoholic alkaline treatment.

• Korean Journal of Medicinal Crop Science
• /
• v.1 no.2
• /
• pp.109-114
• /
• 1993

This study was carried out to determine the optimum planting time for in vitromultiplied tuber of Pinellia ternata(Thunb.) Breit. The tubers were planted on April 20, May 20, June 20, July 20, August 20 and September 20 in 1990. Emergence ratios were 68 to 87% in any planting time except planting on July 20. The number of tubers per $m^2$ at harvest in plantings on May 20 and June 20 were significantly higher with 1,110 and 1,021, respectively, while in plantings after July 20, those were drastically decreased. As compared with fresh yield of planting on April 20(352kg /10a), that of May 20 was 109% and June 20 was 103%, while those of after July 20 were from 41% to 19%. There was a highly positive correlation between dry tuber yield and the number of tubers per $m^2(r=0.991^{**})$. Tuber yields for commercial use(diameter over 7.1mm) were high in planting on May 20(322kg /10a) and on June 20(299kg /10a). It was suggested that optimum field planting time for in vitro multiplied tuber of Pinellia ternata(Thunb.) Breit was from May 20 to June May 20.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.962-963
• /
• 2006

The precipitation behaviors of ${\gamma}"(Ni_3Nb)$ in four Ni-base alloys were investigated. The four alloys were forged Ni20Cr20Fe5Nb alloy, mechanically alloyed Ni20Cr20Fe5Nb alloy, IN 718 alloy and ECAPed(equal channel angular pressing) IN 718 alloy. Aging treatment was employed at either $600^{\circ}C$ or $720^{\circ}C$ for 20 hrs. The TEM observation and hardness test were performed to identify the formation of ${\gamma}"$. The precipitation of ${\gamma}"$ was noticed after aging at $600^{\circ}C$ for 20 hrs in the mechanically alloyed Ni20Cr20Fe5Nb alloy and ECAPed IN 718 alloy, while it was observed after aging at $720^{\circ}C$ for 20 hrs in the forged Ni20Cr20Fe5Nb alloy and IN 718 alloy before ECAP. The lower aging temperature for ${\gamma}"$ precipitation in the mechanically alloyed Ni20Cr20Fe5Nb alloy and ECAPed IN 718 alloy than in the forged Ni20Cr20Fe5Nb alloy and IN 718 alloy before ECAP appeared to be due to the severe plastic deformation which occurred during mechanical alloying or ECAP.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.709-716
• /
• 1998

Three kinds of anti-complementary system and macrophage activating polysaccharides, AB-20-Ia, AB-20-IIa-2a and AB-20-IVa-2 were isolated from the fruit body of Agaricus bisporus and their structures were characterized. The proteoglycan, AB-20-IVa-2 showing the most potent anti-complementary and macrophage activity was composed of glucose, galactose, mannose, xylose, fucose and arabinose in a molar ratio of 3.48:1.83:1.00:0.79:0.74:0.11 and its main component amino acids were phenylalanine (34.72%) and valine (27.84%). The neutral polysaccharides, AB-20-Ia and AB-20-IIa-2a showing lower activity than AB-20-IVa-2, consisted of xylose, glucose, mannose, fucose and arabinose in molar ratios of <0.05:<0.05:2.07:1.00:2.72 and 2.16:1.58:1.00:0.20:0.14, respectively. The molecular weights of AB-20-Ia, AB-20-IIa-2a and AB-20-IVa-2 were 840,000, 750,000 and 650,000 respectively. In the $^1H-\;and\;^{13}C-NMR$ spectra of AB-20-Ia and AB-20-IIa-2a, AB-20-Ia showed only ${\beta}-configuration\;(^1H:\;4.8\;ppm,\;^{13}C:\;107.0\;ppm)$ in the anomerization of the glycosidic linkages, while AB-20-IIa-2a had both ${\alpha}-anomer\;(^1H:\;5.4\;ppm,\;^{13}C:\;102.0\;ppm)\;and\;{\beta}-anomer$. Especially, AB-20-Ia and AB-20-IIa-2a showed acetyl signals $(^1H:\;2.5\;ppm,\;^{13}C:\;21.0\;ppm)$. In the methylation analysis of the three polysaccharides, high proportion of 1,6-linked glucofuranosyl residues were detected in AB-20-Ia, whereas 1,6-linked glucopyranosyl residues and branches linked at position 4 of those mainly contained in AB-20-IIa-2a. AB-20-IVa-2 consisted mainly of 1,2-linked xylofuranosyl residues and 1,6-linked glucopyranosyl residues and branches linked at position 3 of those.