• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.3
• /
• pp.70-77
• /
• 2014

In this paper, the development of unique model of the 2.75 inch rocket propulsion system is described. Recently developed korean 2.75 inch rocket propulsion system shows the improvement of a flame stability resulted from a change in the configuration of propellant grain, and of an incidental ignition protection function using the EMI(electromagnetic interference) filter on ignition system. Moreover it is shown that a directional flight stability is improved by increasing the number of fins and changing the nozzle configuration. Static firing test and thermal shock test were conducted for the validation before flight, and flight test of 210 rounds of rockets was conducted to verify the trajectory uniformity. In addition, intellectual property issues can be overcome with the unique korean 2.75 inch rocket motor as well as the performance improvement.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.108-116
• /
• 2018

A firing test of the 75 tonf-class liquid rocket engine to be used as the first and second stage engines of the KSLV-II was carried out at the rocket engine test facility(RETF). Since this engine uses liquid oxygen as the oxidizer, which is a cryogenic fluid, it is essential that the chill down of the supply pipe line and engine proceed for the firing test; thus, the given inlet requirements must be met. Moreover, it is important to understand the chill down characteristics of the facility and the engine and the amount of liquid oxygen consumed in the chill down process for efficient test operation in the future. In this paper, chill down characteristics of the supply pipe and the engine were evaluated through the investigation of the chill down process of the 75 tonf-class liquid rocket engine at each stage before and after run tank pressurization. In addition, the amount of liquid oxygen consumed was also evaluated.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.106-115
• /
• 2000

This paper presents the measuring technique of time and velocity when rocket motor is burnt out for 2.751" rocket. This technique use doppler effect, frequency spectrum analysis and curve fitting. In this study, we use muzzle velocity radar for doppler signal acquisition, short-time fourier transform for spectrum analysis and curve fitting for smoothing.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.56-61
• /
• 2011

Performance test of a full-scale turbopump assembly for a 75 ton class liquid rocket engine was carried out at full speed. Model fluid was used as a working medium: liquid nitrogen for the oxidizer pump, water for the fuel pump, and hot air for the turbine. The turbopump was operated stably, satisfying the performance requirements. Head coefficient and flow coefficient of the pumps remained constant at the speed-increasing period. In terms of performance characteristics of pumps and turbine, the results from the turbopump assembly test showed a good agreement with those from the turbopump component tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.9
• /
• pp.856-861
• /
• 2010

In this work, experiments on hybrid sounding rocket were conducted to investigate the aerodynamic characteristics and analyze longitudinal static stability. Tests were performed on 1/10 scale models of sounding rocket through Mach number ranging from 1.75 to 2.5 and for angle of attack from $0^{\circ}$ to $6^{\circ}$. Aerodynamic forces and moments were measured by means of a 4 component internal balance. With measured forces and moments, static stability characteristics of rocket were calculated. Tests were made for three models with different length to determine the effect of body length. The visualization of shock waves was carried out by Schlieren optical system to observe variations of shock waves with Mach number and angle of attack.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.544-551
• /
• 2014

A program of launch vehicle performance analysis is composed for the education of the conceptual design of launch vehicles and the requirement analysis for the propulsion system design. The program is applied for the mission analysis of space launch vehicles based on KSLV-II with liquid rocket boosters. The 75-ton class liquid rocket engine is assumed for the boosters by referring the mass ratio of KSLV-II second stage. The launch performance analysis is carried out for KSLV-II with 2, 3 and 4 boosters by targeting the circular orbit of 700 km altitude. The trajectory is assumed as two-dimension considering the variation of the flight environment. Payload of advanced KSLV-II could be increased to maximum 3 tons, though it is limited by the thrust performance of the upper stage.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.5-9
• /
• 2010

In the paper, the dynamic characteristics obtained from hot-firing tests of 1/2.5-scale thrust chamber for 75 tonf-class liquid rocket engine were described. To investigate the dynamic characteristics by engine start transient period and chamber pressure variation, hot-firing tests were performed in the chamber pressures of 30 bar and 60 bar. According to these variations, combustion stability in the combustion chamber was examined.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.129-135
• /
• 2011

A study of efficient plume cooling by core water injection type was performed by computational fluid dynamics. A side injection type is well known, on the contrary, a core injection type is not well known. In order to figure out the characteristics of core injection type, several calculations were performed by computational fluid dynamics along various mass flow rates and locations of water injection. On the basis of analysis it was the adequate cooling condition that water mass flow rate to total mass flow rate was two times at least and location of water injections was L/De=1.2.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.11-15
• /
• 2012

A rotordynamic analysis is performed for a 7 ton class turbopump applied to the third stage LRE(Liquid Rocket Engine) of the KSLV(Korea Space Launch Vehicle). Based on the heritage of the developed experimental 30 ton class turbopump and developing 75 ton class turbopump for the KSLV first and second stage LRE, the 7 ton class turbopump is designed as an one-axis rotor turbopump. Two rotor systems comprised of one oxidizer pump assembly and the other fuel pump-turbine assembly are connected each other using a spline shaft and operating at a design speed. Through the rotordynamic analysis, it is investigated that the turbopump acquires sufficient separate margin of critical speed as a sub-critical rotor.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.201-208
• /
• 2007

A fuel pump and turbine rotordynamic design is performed for a 75 ton thrust liquid rocket engine. A distance from the rear bearing to the turbine was considered as a design parameter for load distribution of the bearings. Asynchronous eigenvalue analysis was performed as a function of rotating speeds, turbine mass and bearing stiffness to investigate critical speed of the fuel pump and turbine. From the numerical analysis, it is found that the effect of the front bearing stiffness is negligible in the critical speed due to the large mass moment of inertia of the turbine. With the rear bearing stiffness over $2{\times}10^{8}N/m$ and the turbine mass below 20 kg, the critical speed of the fuel pump and turbine in long shaft case is at least 70 % higher than the operating speed 11,000 rpm.