• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.181-189
• /
• 2019

In this study, a triple-band antenna that can be used in WLAN(Wireless Local Area Network) at 2.4 GHz, 5.8 GHz, and 5G at 3.5 GHz is fabricated. The proposed antenna uses a parasitic element to show the triple band, and the reflector is used at a distance of ${\lambda}/4$ from the antenna to reduce the Specific Absorption Rate(SAR). Its dimensions are $100{\times}75{\times}1.6mm^3$ and each parameter value is optimized for better performance and a lower SAR value. As a result, we obtained a bandwidth of 540 MHz(2.02~2.56 GHz), 390 MHz(3.39~3.78 GHz), and 1,210 MHz(5.56~6.77 GHz) based on the reflection loss factor of -10 dB. In addition, the SAR values of the antenna with reflector are observed to reduce below the SAR value of international standard.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.4
• /
• pp.35-40
• /
• 2022

This paper proposes an antenna that is located outside the PCB substrate of an electronic product to enable wireless communication in the ISM band. The PCB designed the T-shaped OPEN-STUB power supply line to be miniaturized so that it does not interfere with parts or interfere with design. The characteristics of the antenna were confirmed in the 2.4GHz and 5.8GHz bands using a T-shaped stub feeder and a spiral structure. The size of the antenna is 5mm in width × 6.5mm in length, and the thickness of the PCB is 1.2T. As a result of measurement of the manufactured antenna, it was possible to obtain a return loss of -10dB or more at 2.4GHz and 5.8GHz. In the E-plane, the gain was -4.45 dBi, and in the H-plane, the gain was -1.05 dBi. Therefore, the proposed small antenna for wireless communication showed excellent performance.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2004.06a
• /
• pp.125-130
• /
• 2004

무선 및 이동 통신에 있어 2.4 GHz 대역은 허가 없이 사용할 수 있는 ISM (Industrial Scientific Medical) 주파수 밴드로 다양한 무선통신시스템에 사용되고 있다. 그러나 송출 전력을 제한하고 있어 전파환경 등에 의해 통화품질이 저하되는 경우가 많이 발생한다. 이와 같은 통신의 저하 요소를 해결하는 방법중의 하나로는 이득이 높은 안테나의 사용을 들 수 있다. 본 논문은 2.4 GHz 대역에 있어 지향성 이득이 큰 마이크로스트립 안테나를 설계하고, 패치의 배열에 따른 이득의 변화를 제시하여 통신시스템의 용도에 따른 안테나의 적절한 선택기준을 제시한다. 설계한 마이크로스트립 안테나의 특성을 살펴보면 공진주파수 2.45 GHz 에서 입력 임피던스는 약 50 Ω으로 별도의 정합회로가 필요치 않으며, 1개의 패치인 경우 안테나의 이득은 약 6.2 dBi 이고, 패치의 배열에 따라 이득의 증대가 나타났다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.55-60
• /
• 2019

Because of an rapid increase of using a wireless Internet, the originally used communication of 2.4 GHz band was saturated and crossed and there were some problems. According to this, the development of a wireless Internet technology of 5 GHz Band proceeded. In the thesis we researched a Square Slot Microstrip Patch Antenna available in 5 GHz band of wireless communication. The research designed and analyzed the Antenna through HFSS. Ultimately, we compared and analyzed made Antenna through a Network Analyzer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.2
• /
• pp.345-354
• /
• 2024

In this paper, we propose a triple band WLAN antenna for Wi-Fi 6E band with DGS. The proposed antenna has the characteristics required frequency band and bandwidth by considering the interconnection of two strip lines and three areas on the ground place. The total substrate size is 31 mm (W) × 50 mm (L), thickness (h) 1.6 mm, and the dielectric constant is 4.4, which is made of 22 mm (W₆ + W₄ + W₅) × 43mm (L₁ + L₂ + L₃ + L₅) antenna size on the FR-4 substrate. From the fabrication and measurement results, bandwidths of 340 MHz (1.465 to 1.805 GHz) for 900 MHz band, 480 MHz (2.155 to 2.635 GHz) for 2.4 GHz band and 1950 MHz (4.975 to 6.925 GHz) for 5.0/6.0 GHz band were obtained on the basis of -10 dB. Also, gain and radiation pattern characteristics are measured and shown in the frequency triple band as required.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.78-86
• /
• 1996

Solid-state devices can be directly integrated with a planar antenna to form active antenna elements. In this paper, the voltage controlled oscillator (VCO) is designed and fabricated at 2.4 to 2.5 GHz using a microstrip patch antenna. A varactor diode is used as avariable reactance. The predicted frequency tuning range of the VCO is 2.448 to 2.498 GHz in the design procedure and the fabricated VCO has 2.446 to 2.498 GHz frequency tuning range when the varactor tuning voltage is varied from 0 to 11V. Transmitted power output of the patch antenna which serves both as a rsonator and a radiating element for VCO is about 18 mW over this tuning range.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1075-1080
• /
• 2021

In this paper, we designed a 24.4GHz 2-channel TX and 4-channel RX patch array antenna mounted on a short-range vehicle radar system to simultaneously measure the range and speed of a single object within a single measurement cycle. The antenna was designed and fabricated using Rogers' RO4350B(ε_r=3.48, 0.5T) board. Through measurement, it was confirmed that the design specifications of antenna gain (> 10dBi or more) and radiation pattern (Elevation HPBW > 10deg.) were satisfied at 24.4 GHz frequency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.517-521
• /
• 2018

In this paper, we designed a microstrip antenna for LTE / WLAN for wireless mobile communication high - speed communication network. The substrate of the proposed antenna is FR-4 (er = 4.3), the size is $20[mm]{\times}40[mm]$ and can be used in the frequency band of 2.77 [GHz] and 5 [GHz] Respectively. The simulation was performed using CST Microwave Studio 2014. The simulation result shows that the gain is 2.034 [dBi] at 2.77 [GHz] and 4.95 [dBi] at 5 [GHz]. The S-parameter was also found to be less than -10 [dB] (WSWR 2: 1) in the desired frequency band. The frequency bands of LTE and WLAN are widely used around the world, and the usage of the frequency is also increasing. For this reason, the dual-band antenna of LTE / WLAN is designed to help many users in a good way to use both technologies.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.86-93
• /
• 2008

A low-power, low-noise, highly-linear hybrid balun circuit is proposed for 2.4-GHz fully differential CMOS direct conversion receivers. The hybrid balun is composed of a passive transformer and loss-compensating auxiliary amplifiers. Design issues regarding the optimal signal splitting and coupling between the transformer and compensating amplifiers are discussed. Implemented in $0.18{\mu}m$ CMOS process, the 2.4 GHz hybrid balun achieves 2.8 dB higher gain and 1.9 dB lower noise figure than its passive counterpart and +23 dBm of IIP3 only at a current consumption of 0.67 mA from 1.2 V supply. It is also examined that the hybrid balun can remarkably lower the total noise figure of a 2.4 GHz fully differential RF receiver only at a cost of 0.82 mW additional power dissipation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1633-1640
• /
• 2016

In this paper, we propose a open-ended rectangular microstirp patch antenna with fork-shaped feeding structure. This antenna extends the effective bandwidth by transforming single or multi resonant frequency and is designed planar monopole structure with microstrip line to satisfy the WLAN bands (2.4 - 2.484, 5.15 - 5.35, 5.25-5.825 GHz). The substrate is printed in 0.8 mm thickness on an FR-4 board. A commercial 3D simulation tool was used to analyze surface current and electromagnetic field distribution in order to analyze the operation mode and reconfiguration principle of antenna. According to the lengths of individual patches, simulated reflection loss was compared to obtain optimized values. When it was designed with the optimized values, it satisfied WLAN bands (2.380 - 2.710, 4.900 - 5.950 GHz), if the switch is off, and 2.4 WLAN band (2.380 - 2.710 GHz). From the fabricated and measured results, measured results of return loss, gain and radiation patterns characteristics displayed for operating bands.