• Restorative Dentistry and Endodontics
• /
• v.44 no.4
• /
• pp.37.1-37.10
• /
• 2019

Objectives: This study evaluated the bond strength of various fiberglass post cementation techniques using different resin-based composites. Materials and Methods: The roots from a total of 100 bovine incisors were randomly assigned to 5 treatment groups: G1, post + Scotchbond Multi-Purpose (SBMP) + RelyX ARC luting agent; G2, relined post (Filtek Z250) + SBMP + RelyX ARC; G3, individualized post (Filtek Z250) + SBMP; G4, individualized post (Filtek Bulk-Fill) + SBMP; G5, individualized post (Filtek Bulk-Fill Flow) + SBMP. The samples were subjected to the push-out (n = 10) and pull-out (n = 10) bond strength tests. Data from the push-out bond strength test were analyzed using 2-way analysis of variance (ANOVA) with the Bonferroni post hoc test, and data from the pull-out bond strength test were analyzed using 1-way ANOVA. Results: The data for push-out bond strength presented higher values for G2 and G5, mainly in the cervical and middle thirds, and the data from the apical third showed a lower mean push-out bond strength in all groups. No significant difference was noted for pull-out bond strength among all groups. The most frequent failure modes observed were adhesive failure between dentine and resin and mixed failure. Conclusions: Fiberglass post cementation using restorative and flowable bulk-fill composites with the individualization technique may be a promising alternative to existing methods of post cementation.

• Restorative Dentistry and Endodontics
• /
• v.44 no.1
• /
• pp.10.1-10.11
• /
• 2019

Objectives: The objective of this study was to assess coronal discoloration induced by the following intracanal medicaments: calcium hydroxide (CH), a mixture of CH paste and chlorhexidine gel (CH/CHX), and triple antibiotic paste (3Mix). Materials and Methods: Seventy extracted single-canal teeth were selected. Access cavities were prepared and each canal was instrumented with a rotary ProTaper system. The specimens were randomly assigned to CH, CH/CHX, and 3Mix paste experimental groups (n = 20 each) or a control group (n = 10). Each experimental group was randomly divided into 2 subgroups (A and B). In subgroup A, medicaments were only applied to the root canals, while in subgroup B, the root canals were completely filled with medicaments and a cotton pellet dipped in medicament was also placed in the pulp chamber. Spectrophotometric readings were obtained from the mid-buccal surface of the tooth crowns immediately after placing the medicaments (T1) and at 1 week (T2), 1 month (T3), and 3 months (T4) after filling. The ${\Delta}E$ was then calculated. Data were analyzed using 2-way analysis of variance (ANOVA), 3-way ANOVA, and the $Scheff{\acute{e}}$ post hoc test. Results: The greatest color change (${\Delta}E$) was observed at 3 months (p < 0.0001) and in 3Mix subgroup B (p = 0.0057). No significant color change occurred in the CH (p = 0.7865) or CH/CHX (p = 0.1367) groups over time, but the 3Mix group showed a significant ${\Delta}E$ (p = 0.0164). Conclusion: Intracanal medicaments may induce tooth discoloration. Use of 3Mix must be short and it must be carefully applied only to the root canals; the access cavity should be thoroughly cleaned afterwards.

• Physical Therapy Korea
• /
• v.23 no.4
• /
• pp.55-62
• /
• 2016

Background: The functioning of the serratus anterior (SA) muscle is essential to normal scapulohumeral rhythm during forward flexion (FF) of the shoulder. Also, SA weakness and overuse of the upper trapezius (UT) is observed in patients with shoulder dysfunction and trapezius myalgia. We designed a combination exercise involving FF and scapular protraction with resistance (CFFSP) to activate the SA muscle and to deactivate the UT muscle. Objects: The purpose of this study was to determine whether or not CFFSP would be more effective in activating the SA muscle than FF alone and FF with scapular protraction (FFP). Methods: Nineteen subjects (12 men and 7 women) participated in this study and performed FF, FFP, and CFFSP at $120^{\circ}$. Surface electromyography was applied to the SA, UT, and pectoralis major (PM) muscles, as was one-way analysis of variance (ANOVA) with repeated measures. Statistical significance was set at .05. Bonferroni adjustment was used to counteract the problem of multiple comparisons, with a statistical level of significance of .017 (.05/3). Results: A statistically significant difference was found in relation to the three positions for the SA muscle (p<.001) and the SA/UT ratio (p=.005) using ANOVA. Significantly different results, depending on the position, were also demonstrated using the Bonferroni post-hoc test for the SA muscle ($FF=28.27{\pm}16.20$, $FFP=45.66{\pm}15.81$, and $CFFSP=62.4{\pm}27.21$) and for the SA/UT ratio ($FF=3.04{\pm}2.14$, $FFP=3.61{\pm}2.38$, and $CFFSP=5.95{\pm}3.01$). Significant differences between the three positions was not found regarding the average amplitude of SA/PM muscle ratio (SA/PM: p=.060). Conclusion: We recommend the use of CFFSP to strengthen the SA muscle at $120^{\circ}$.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.4
• /
• pp.259-266
• /
• 2016

PURPOSE. The purpose of this study was to assess the effect of surface treatments on shear bond strength of resin composite bonded to thermocycled and non-thermocycled CAD/CAM resin-ceramic hybrid materials. MATERIALS AND METHODS. 120 specimens ($10{\times}10{\times}2mm$) from each material were divided into 12 groups according to different surface treatments in combination with thermal aging procedures. Surface treatment methods were airborne-particle abrasion (abraded with 50 micron alumina particles), dry grinding (grinded with $125{\mu}m$ grain size bur), and hydrofluoric acid (9%) and silane application. According to the thermocycling procedure, the groups were assigned as non-thermocycled, thermocycled after packing composites, and thermocycled before packing composites. The average surface roughness of the non-thermocycled specimens were measured after surface treatments. After packing composites and thermocycling procedures, shear bond strength (SBS) of the specimens were tested. The results of surface roughness were statistically analyzed by 2-way Analysis of Variance (ANOVA), and SBS results were statistically analyzed by 3-way ANOVA. RESULTS. Surface roughness of GC were significantly lower than that of LU and VE (P<.05). The highest surface roughness was observed for dry grinding group, followed by airborne particle abraded group (P<.05). Comparing the materials within the same surface treatment method revealed that untreated surfaces generally showed lower SBS values. The values of untreated LU specimens showed significantly different SBS values compared to those of other surface treatment groups (P<.05). CONCLUSION. SBS was affected by surface treatments. Thermocycling did not have any effect on the SBS of the materials except acid and silane applied GC specimens, which were subjected to thermocycling before packing of the composite resin.

• Restorative Dentistry and Endodontics
• /
• v.46 no.1
• /
• pp.5.1-5.13
• /
• 2021

Objectives: The aim of the current study was to assess whether the amount of extruded debris differs for straight and severely curved root canals during retreatment using H-files, R-Endo, Reciproc and ProTaper Universal Retreatment (PTU-R) files. Additionally, the area of residual filling material was evaluated. Materials and Methods: Severely curved (n = 104) and straight (n = 104) root canals of maxillary molar teeth were prepared with WaveOne Primary file and obturated with gutta-percha and AH Plus sealer. Root canal filling materials were removed with one of the preparation techniques: group 1: H-file; group 2: R-Endo; group 3: Reciproc; group 4: PTU-R (n = 26). The amount of extruded material and the area of the residual filling material was measured. The data were analyzed with 2-way analysis of variance (ANOVA) and 1-way ANOVA at the 0.05 significance level. Results: Except for Reciproc group (p > 0.05), PTU-R, R-Endo, and H-file systems extruded significantly more debris in severely curved canals (p < 0.05). Each file system caused more residual filling material in severely curved canals than in straight ones (p < 0.05). Conclusions: All instruments used in this study caused apical debris extrusion. Root canal curvature had an effect on extruded debris, except for Reciproc system. Clinicians should be aware that the difficult morphology of the severely curved root canals is a factor increasing the amount of extruded debris during the retreatment procedure.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.2
• /
• pp.125-132
• /
• 2017

Objective: The aim of this study was to investigate the effect of targeted knee flexion angle on biomechanical factors of knee joint between upward and downward phases during the forward lunge. Method: Eight elderly subjects (age: $22.23{\pm}1.51years$, weight: $69{\pm}6.63kg$, height: $174.88{\pm}6.85cm$) participated in this study. All reflective marker data and ground reaction force during a forward lunge were collected. The knee joint movement and reaction force and joint moment at maximum knee flexion angle were compared by repeated measures one-way analysis of variance (ANOVA) (p<.05). The peak knee joint reaction force and joint moment between upward and downward phases were compared by repeated measures two-way ANOVA (p<.05). Results: The anterior and vertical knee joint movements, reaction force, and extensor moment of $80^{\circ}$ targeted knee flexion condition at maximum knee flexion angle was greater than both $90^{\circ}$ and $100^{\circ}$ conditions (p<.05). The $80^{\circ}$ knee flexed angle condition had greater peak joint reaction force and extensor moment compared with both $90^{\circ}$ and $100^{\circ}$ conditions between upward and downward phases during the forward lunge. Conclusion: As the targeted knee joint flexion angle increases, knee joint movement and kinetic variables become greater during the forward lunge exercise.

• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.144-150
• /
• 2013

This paper presents an analysis of door design for the Ui LRT based on experiments to predict doorway flow-time and their analyses results. A similar railway vehicle (from Gimhae LRT) and operational conditions are utilized to assess the doorway flow-time through repetitive experiments. Design of the experiments consists of four scenarios, and the experiments are repeated 39 times in total. We use the results of the experiments to verify the design of doors of Ui LRT (e.g. the required number of doors and their width). Various statistical analyses are carried out for the flow-time with respect to the number of boarding/alighting passengers. We make three category levels of boarding/alighting passengers, and analyze the mean and variance for each category, and then carry out One-Way ANOVA to analyze how the number of boarding/alighting and onboard passengers impact flow-time. The results of this paper can be used for making decisions about doors of the LRT vehicle.

• Journal of Digital Convergence
• /
• v.17 no.2
• /
• pp.255-264
• /
• 2019

This study was a cross-sectional study done to determine the relevance and impact factors of critical thinking and nursing practice environment on clinical decision making among nurses. A survey was conducted for April 2017 with self-report questionnaire. Participants were 261 registered nurses working in one tertiary hospital. Data were analyzed using descriptive statistics, independent t-test, one-way ANOVA, Pearson's correlation coefficients, and hierarchical regression analysis with SPSS/WIN(21.0). Factors affecting clinical decision making included age, educational background, position, work shift, clinical career. Clinical decision making had a positive correlation with critical thinking and nursing practice environment. And position, critical thinking and nursing practice environment accounted for 35.8% of the variance in clinical decision making. Therefore, quality management for developing nursing professionalism and administrative support for effective staffing and resource adequacy in addition improving critical thinking increase nurses'clinical decision making.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.2
• /
• pp.253-259
• /
• 2012

The purpose of this study was to determine how smartphone use posture affects biomechanical variables and muscle activities. Eleven university students(age: $22.2{\pm}2.6$ yrs, height: $176.6{\pm}4.7$ cm, weight: $69.5{\pm}7.5$ kg) who have no musculoskeletal disorder were recruited as the subject according to having experience in using the smartphone for more than one year. Angular velocity, muscle activity, and thumb finger pressure were determined for each trial. For each dependent variable, a one-way analysis of variance (ANOVA) with repeated measures was performed to test if significant difference existed among different three conditions (p<.05). The result showed that rotational angular velocity of the first metacarpal were increased in DESK posture compared with STAND posture during SU phase. The average nEMG values of FDI(First dorsal interosseous) were less in SIT and DESK posture compared with STAND posture during SR phase. These indicated that smartphone postures may effect the thumb ROM(Range of motion) and muscle activity. This has led to suggestions of the need for further kinetic and EMG analyses to evaluate best assess and characterize with smartphone use.

• Korean Journal of Social Welfare
• /
• v.51
• /
• pp.183-210
• /
• 2002

The purpose of this study is to investigate correction-level associated with the social support perceived by juvenile delinquents. To accomplish these purposes, this study used sample of 546 juvenile delinquents who are in the process of the beginning stage in the police and prosecution. Social support and correction were assessed with an instrument designed for this study. Juvenile delinquents completed instruments assessing the following variables: (1) perceived social support scale, specially social support types(esteem support, emotional support, informational support) and social support providers (parents, relatives, friends, teachers, community) (2) correction scale, specially social stigma, social deprivation, self reflection, legal consciousness, self concept. The resulting scale of the instrument had good internal reliability(Cronbach's alpha=. ) and was scored so that high scores indicated a willingness to access. To examine this purpose, One way ANOVA, multiple regression analysis were conducted. And the results are as follows: The relationship ratings of the correction factors were positively associated with their rating of the type of social support. Informational support was positively associated with self reflection and esteem support was positively associated with self concept, legal consciousness, self reflection and emotional support were positively associated with esteem. The type of support according to support providers was significant, explaining 25% of the variance in self concept scores. The significant predictor was esteem support from friends and emotional support from a community. The type of support according to support providers was significant, explaining 20% of the variance in legal consciousness scores. The significant predictor was informational support from teachers and esteem support from a community. The type of support according to support providers was significant, explaining 21% of the variance in self reflection scores. The significant predictor was esteem support and emotional one from relatives.