• 전기학회논문지
• /
• 제61권2호
• /
• pp.324-328
• /
• 2012

A recovered jitter of CDR(Clock and Data Recovery) Circuit based on Dual-loop DLL(Delay Locked Loop) for data recovery in high speed serial data communication is changed by depending on the input data and reference clock frequency. In this paper, 2-step DPC which has constant jitter performance for wide-range input frequency is proposed. The designed prototype 2-step CDR using proposed 2-step DPC has operation frequency between 200Mbps and 4Gbps. Average delay step of 2-step DPC is 10ps. Designed CDR circuit was tested with 0.18um CMOS process.

• 한국의학물리학회지:의학물리
• /
• 제29권4호
• /
• pp.157-163
• /
• 2018

Plans converted using dose-volume-histogram-based plan conversion (DPC) were evaluated by comparing them to the original plans. Changes in the dose volumetric (DV) parameters of five volumetric modulated arc therapy (VMAT) plans for head and neck (HN) cancer and five VMAT plans for prostate cancer were analyzed. For the HN plans, the homogeneity indices (HIs) of the three planning target volumes (PTV) increased by 0.03, 0.02, and 0.03, respectively, after DPC. The maximum doses to the PTVs increased by 1.20, 1.87, and 0.92 Gy, respectively, after DPC. The maximum doses to the optic chiasm, optic nerves, spinal cord, brain stem, lenses, and parotid glands increased after DPC by approximately 4.39, 3.62, 7.55, 7.96, 1.77, and 6.40 Gy, respectively. For the prostate plans after DPC, the HIs for the primary and boost PTVs increased by 0.05 and 0.03, respectively, and the maximum doses to each PTV increased by 1.84 and 0.19 Gy, respectively. After DPC, the mean doses to the rectum and femoral heads increased by approximately 6.19 and 2.79 Gy, respectively, and those to the bladder decreased by 0.20 Gy when summing the primary and boost plans. Because clinically unacceptable changes were sometimes observed after DPC, plans converted by DPC should be carefully reviewed before actual patient treatment.

• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.615-626
• /
• 2016

약용매에 용해가 가능한 알킬기 변성 에폭시수지를 합성하기 위하여, 1단계에서 당량비 기준 dodecyl phenol (DP)/formaldehyde = 1.25~1.333/1.0로 하여, 합성된 도데실 페놀 노볼락 화합물의 벤젠 고리수가 3.0~5.0가 되도록 합성하였고, 2단계에서는 당량비 기준으로 1단계에서 합성된 도데실 페놀 노볼락 화합물/비스페놀A형 에폭시수지 (YD-128) = 1/2로 합성하였고, 3단계는 지방산을 투입하여 지방산 변성 도데실 페놀 노볼락 에폭시수지를 합성하였다. 합성된 수지의 반응성도, 점성도와 분자량 변화, 약용매 가용성 등을 측정한 결과, 1단계에서 합성된 도데실 페놀 노볼락 화합물의 벤젠고리수가 늘어남에 따라 지방산 변성 도데실 페놀 노볼락 에폭시수지의 점도가 상승하였고, 약용매 가용성이 우수하였다. 도료 제조 후 물성을 측정한 결과, 개환촉매로 triphenylphosphine(TPP)을 사용한 DPFAC-5는 건조속도, 접착성, 도막경도, 내충격성, 내산성 및 저장안정성이 양호하였다.