• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.975-978
• /
• 1999

The transmission line effects of IC interconnects have a substantial effect on a hish-speed VLSI circuit performance. The effective transmission lime parameters are changed with the increase of the operation frequency because of the skin of the skin effect, proximity effect, and silicon substrate. A new signal delay estimation methodology based on the RLC-distributed circuit model is presented ［2］. The methodology is demonstrated by using SPICE simulation and a high-frequency experiment technique.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.717-718
• /
• 2013

• 오토저널
• /
• 제15권3호
• /
• pp.36-46
• /
• 1993

In CVT vehicle, the engine speed is completely decoupled from the vehicle speed within the range from maximum transmission ratio to minimum transmission ratio. This allows the engine to operate in optimal state(e.g. best fuel economy or maximum power mode.) In this study, the CVT control algorithm for optimal operation of engine is suggested. In order to implement the real time digital control of electro-hydraulic CVT system, a software called CVTCON has been developed. CVTCON also includes the CVT operation module, (2) system test module, (3) system control module and (4) data management module. By using the CVTCON and the electro-hydraulic CVT system, two modes of experiments were carried out: constant throttle opening mode and acceleration mode. From the experimental result, it was found that the algorithm suggested in this study showed optimal operation of the CVT system.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권3호
• /
• pp.28-36
• /
• 2002

The continuously variable transmission (CVT) mechanism considered here is the output coupled type which combines the functions of a 2K-H I type differential gear unit and a V-belt type continuously variable unit (CVU). One shaft of the CVU is connected directly to the output shaft and another shaft of it is linked to the differential gear unit. It is shown that some fundamental relations (speed ratios, power flows and efficiencies) for twelve mechanisms previously described are valid by various experimental studies, six of them produce a power circulation and the others produce a power split. Parametric analysis is carried out in relation to the efficiency, speed ratio and power ratios in order to assist in the design of an optimum configuration. Some useful properties associated with power flow modes also are discussed in the output coupled type continuously variable transmission.

• Journal of Biosystems Engineering
• /
• 제21권2호
• /
• pp.134-145
• /
• 1996

Since the skid-steer loader is able to work for excavating, lifting and transporting load even at the narrow space, they are widely used in the regular farm and the livestock farm. The skid-steer loader normally adopts the hydrostatic transmission because the power to move the machine backward and forward should be delivered independently on both sides of wheels. Contrast to the mechanical system such as chain and belt transmissions, however, the hydrostatic transmission is less efficient in the use of energy and more difficult in the maintenance. This study was intended to investigate the feasibility of using triangular-type belt clutch and V-belt transmission for the newly developed skid-steer loader in order to overcome the problems stated in the hydrostatic transmission. In the developed triangular-type belt clutch, the centers of driving, driven and idler sheaves are arranged in the triangular shape in a plane, and V-belts were loaded loosely on three sheaves. The power is transmitted by pressing the idler connected to a lever on the loosened V-belt. Contrast to the normal belt clutch using two sheaves, the newly developed belt clutch has the characteristics of small contact-angle of the driving sheave at no bucket load and increasing contact-angle at the time of power transmission. The results of research can be summarized as follows: 1) The developed triangular-type belt clutch adopted a spring-loaded slackside idler which could transmit more power than a fixed idler could by sacrificing the belt life. The life of V-belt used in the power transmission reached at 500 hours(6 months) when the engine power of 11.8 ㎾ was transmitted. Also, it was feasible to develop the large industrial skid-loader with the V-belt transmission by using the proper set of sheaves. 2) The developed skid-steer loader changed the rotating radius and speed with bucket loads as the conventional skid steer loader did. The rotating speed was 47 deg/s at the maximum bucket load of 2.74 kN when the minimum rotating radius was 1.5m. 3) The power required in turning at the bucket load of 2.74 kN was 4 ㎾ and the slippage of V-belt was less than 1%.

• 한국인터넷방송통신학회논문지
• /
• 제8권6호
• /
• pp.9-14
• /
• 2008

현재 인터넷 통신에 주로 사용하고 있는 x-DSLL 제품에 있어, ADSL은 대략 3.5km의 전송거리를 갖고 VDSL은 2km 이내의 전송거리를 갖는다. 즉, 전화선을 이용한 인터넷 전송속도는 전송선로의 특성상 통신속도와 반비례하여 전송거리가 결정되는 물리적 구조를 갖는다. 인터넷 전송방식에 따른 통신속도를 결정하는 또 다른 요소로 AM방송에 의한 ADSL회선의 속도저하, 단파통신에 의해 VDSL의 전송대역과 중첩되어 속도를 저하 시킨다. 본 연구에서는 Field to cable에 의해 유도된 공중파를 제거시키면서 신호를 증폭 전송대역을 최대로 확보하여 최적거리내 확보된 통신속도로 전송거리를 2배정도 향상시키는 제품개발에 관한 연구결과이다.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1495-1505
• /
• 2002

As combining the functions of a 2K-H B type differential gear unit and a V-belt type continuously variable unit(CVU), 16 different mechanisms are presented. Some useful theoretical formula related to speed ratio, power flow and efficiency are derived and analyzed. Continuously variable transmission(CVT) mechanisms are proposed, which can of ffr a backward mode, a geared neutral, an underdrive mode and an overdrive mode. They are not required of a starting device as a torque converter. CVT mechanisms developed here present two distinct operating modes which are a power circulation mode and a power split mode. The transition of two modes takes place at the particular CVU speed ratio. For these CVT mechanisms, performance analysis related to speed ratio, power ratio and theoretical efficiency are executed.

• 한국통신학회논문지
• /
• 제30권7A호
• /
• pp.535-541
• /
• 2005

본 논문은 채널을 파장별로 할당하는 방식인 WDM-PON을 각각의 채널당 단일광원을 사용하는 방식을 이용하여 기가비트 전송이 가능한 GPON 표준에 맞춰 단일 모드 광섬유와 다중 모드 광섬유로 혼합 구성된 망을 제안하고, 제안된 시스템의 전송 특성을 실험을 통해 고찰하였다. 본 시스템은 고속의 하향전송을 위해 직접변조가 가능한 DFB-LD를 사용하였고, 상향전송을 위해서는 저가의 ONU구성을 위해 SFP 타입의 Transceiver모듈을 사용하였다. 광 선로구간에서의 파장다중화를 위해서 채널 결합 및 분기기능을 갖는 MUX/DEMUX를 이용하였으며, SMF로 이루어진 WDM-PON망의 ONU단에 추가로 1km이내의 MMF를 연결시켜 두 라인을 혼합시킨 시스템을 구성하였다. 시스템의 타당성을 입증하기 위해 ITU-T G.984.2에서 권고하는 하향 2.5 Gbit/s, 1.25 Gbit/s, 상향 1.25 Gbit/s, 622 Mbit/s 속도의 전송실험을 하였으며, 표준안을 근거로 비교분석하여 상$\cdot$하향 전송에서 적합성과 여유도를 확인하였다.

• Journal of electromagnetic engineering and science
• /
• 제8권2호
• /
• pp.41-46
• /
• 2008

A bandwidth and power efficient high speed ubiquitous sensor network(USN) for realizing a ubiquitous society is a great challenge for researcher community. In this paper we incorporate a cooperative transmission protocol within a special type of multi-code modulation to meet these requirements. Multi-code(Mc) modulation has been developed for high-speed data transmission over wireless channels. We proposed a new class of orthogonal codes for multi-code modulation which is an orthogonal subset of orthogonal codes(OSOC). Our proposed OSOC structure allows us to use only one relay to cooperate M nodes that effectively reduces the bandwidth and power requirement. This protocol is similar to spread-spectrum(SS) technique that can reduce both broad and narrow band jamming.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.739-742
• /
• 1997

Continuously variable transmission(CVT) mechanisms are proposed, which can offer a backward mode, a geared neutral, an underdrive mode and an overdriver mode. They are not required of a starting device as a torque converter. CVT mechanisms developed here present two distinct operating modes which are a power circulation mode and a power split mode. The transition of two modes takes place at the particular CVU speed ratio. For these CVT mechanisms, performance analysis related to speed ratio, power ratio and theoretical efficiency are executed.