• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.5
• /
• pp.357-363
• /
• 2003

There have been lots of studies on noise transmission analysis and noise reduction In ducts. In order to reduce the noise transmission in ducts. active noise cancellation techniques have often been employed and a rotation shaft with blades has sometimes been suggested. These Ideas were not successfully commercialized because of the limitation of real life such as size or application difficulties. This study investigated how a rotational shaft with blades could reduce the noise transmission in a duct. To do so, an assembly of the shaft and the $haft housing was built In the middle of a duct. and the clearance between the blades and the housing was 0.2 mm. The noise reduction was experimentally evaluated with respect to the number of blades. the rotation speed, and the rotation or stop. This paper showed that the noise reduction resulted in about 14∼19 dBA regardless of the three test conditions only If the blades always blocked the duct. And. the noise reduction increased due to the higher number of blades and the lower speed of the shaft.

• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.331-343
• /
• 2019

Dynamic thermal rating of the overhead transmission lines is affected by many uncertain factors. The ambient temperature, wind speed and wind direction are the main sources of uncertainty. Measurement uncertainty is an important parameter to evaluate the reliability of measurement results. This paper presents the uncertainty analysis based on Monte Carlo. On the basis of establishing the mathematical model and setting the probability density function of the input parameter value, the probability density function of the output value is determined by probability distribution random sampling. Through the calculation and analysis of the transient thermal balance equation and the steady- state thermal balance equation, the steady-state current carrying capacity, the transient current carrying capacity, the standard uncertainty and the probability distribution of the minimum and maximum values of the conductor under 95% confidence interval are obtained. The simulation results indicate that Monte Carlo method can decrease the computational complexity, speed up the calculation, and increase the validity and reliability of the uncertainty evaluation.

• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.386-398
• /
• 2019

The transmission capacity of transmission lines is affected by environmental parameters such as ambient temperature, wind speed, wind direction and so on. The environmental parameters can be measured by the installed measuring devices. However, it is impossible to install the environmental measuring devices throughout the line, especially considering economic cost of power grid. Taking into account the limited number of measuring devices and the distribution characteristics of environment parameters and transmission lines, this paper first studies the environmental parameter estimating method of inverse distance weighted interpolation and ordinary Kriging interpolation. Dynamic thermal rating of transmission lines based on IEEE standard and CIGRE standard thermal equivalent equation is researched and the key parameters that affect the load capacity of overhead lines is identified. Finally, the distributed thermal rating of transmission line is realized by using the data obtained from China meteorological data network. The cost of the environmental measurement device is reduced, and the accuracy of dynamic rating is improved.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.57-63
• /
• 2015

There are increasing demands for the transmission of high speed and non-compressed video informations. The video data usually compressed before transmission for reducing the data. And the received data uncompressed at a receiver, consequently the processing delay is unavoided. In this paper, we implement a 60 GHz band wireless transmission system for real time multimedia contents transmission, and successfully transmit the full HD class uncompressed video information at 4 Gbps with 20 m apart. Hence the non-compressed video data from a remote camera or a smart phone can be transmitted and displayed in a large screen in real time via the developed transceiver system.

• Journal of Internet Computing and Services
• /
• v.5 no.6
• /
• pp.59-66
• /
• 2004

In this paper, we propose a transmission rate prediction method of video data. The proposed method checks shot transition characteristics after dividing MPEG video data into a GoP unit and then uses Kalman filter. It used algorithm to detect shot transition information by high speed in compressed domain in order to check a correct shot transition of video data and classified into a abrupt shot transition type and a gradual shot transition type. Information to have been classifying is used as factors of Kalman filter and predicts a transmission rate of video data. Also, the proposed method decreased processing time with detecting shot transition and predicting a transmission rate of video data in compressed domain. It predicted a transmission rate with 96.2- 97.6% in the experiment that used three kinds of 911 1frames of different video data.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.537-539
• /
• 2007

Telemetry processing system requires minimum bit transition level in data streams to maintain a bit synchronization while receiving telemetry signal. PN code has a capability of providing the bit transition and is widely used in the packet communication of CCSDS. CCSDS PN code that generator polynomial is $h(x)=x^{8}+x^{7}+x^{5}+x^{3}+1$, and the random bit sequence that is generated from this polynomial is repeated with the cycle of 255 bits. As the resolution of satellite image increases, the size and transmission rate of data increases. To process of huge and bulky size of satellite image, the speed of CCSDS PN Processing is very important. This paper introduces the way of improving the CCSDS PN Processing speed through processing 128 bits at one time using the feature of cyclic structure that repeats after first 255 bytes by grouping the random bit sequence with 1 byte and Intel Streaming SIMD Extensions 2. And this paper includes the comparison data of processing speed between SSE2-applied implementation and not-applied implementation, in addition, the measured value of speed improvement.

• IE interfaces
• /
• v.14 no.2
• /
• pp.148-157
• /
• 2001

This paper considers a network restoration algorithm for all-optical WDM networks. As the increasing traffic and transmission speed, any failure on the networks will lead to loss of huge data and disruption of the services. Therefore, a network restoration algorithm is necessary for the high-speed all-optical networks. This paper suggests a distributed restoration algorithm for line or channel level failures under the dynamic rerouting. For the algorithm, some measures for performance evaluation are explicitly derived and simulation studies are exploited to evaluate its usability by SLAM(Simulation Language for Alternative Modeling) II.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.2
• /
• pp.143-150
• /
• 2018

In this study, we designed and developed an underwater LED communication system composed of an LED and a photo sensor. In addition, we experimented with video data transmission in a water tank. Two communication modules were installed in the 3 m water tank, and the image data transmission test was successfully performed at a rate of 20 frames per second(FPS), image resolution of $480{\times}272$, and data communication speed of 4 Mbps.

• Journal of Biosystems Engineering
• /
• v.22 no.4
• /
• pp.497-502
• /
• 1997

Automation facilities of greenhouses have been continuously developed. However, the conventional two-stage worm gear reducer reveals some problems, including low transmission efficiency. The worm gear reducer also have some difficulties in manufacturing and short life. Therefore, this study was performed to develop a planetary gear reducer, having a high Sear reduction ratio and high torque transmission efficiency. The planetary gear system consisted of a fixed ring gear and a 2-teeth differential ring gear turning slow, as the planetary pinion orbits fast around the fixed ring gear. The developed gear system can achieve a high speed reduction rate at one stage. The reducing system was employed to the greenhouse ventilation system. The reducer has the transmission efficiency of 70.5%, 2∼3 times longer life time, and twofold roll-up torque at an affordable price, comparing with conventional reducers. This reducer can be also applied to many industrial equipments, such as industrial crane, hoist, elevator and gondola etc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.2
• /
• pp.102-114
• /
• 1987

In this paper, in order to develop the transmission system between the remote subscriber and the central office, the hardware and software implementation of a SMUX(Statistical Multiplexer)which can interleace eleven 16Kbps D-channels over a 64Kbps B-channel is obtained. As a result of this study, the high speed data transmission by the use of a dynamic buffer memory management algofithm for statistical multiplexing is realized. Especially a software architectur for interruption is proposed in order to improve performance of the transmission system more efficiently.