• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.243-251
• /
• 2010

The military has been putting great efforts into applying data communication on existing voice communication systems being used in NCW(Network Centric Warfare). Data communication will be an effective choice in one of many effort to yield a minimum kill chain, comparing to legacy voice communications, when tactical units conduct their missions. However, the required budget will be enormous, in case of the replacement of a lot of legacy communication systems with new one. As a cost-effective alternative, the tactical data communication systems using the conventional radio systems instead of the development of new radio systems has been proposed. It is mandatory, though, to ensure QoS while maintaining data communication by making use of legacy radio systems already in use. This paper focuses on the performance issues experimented and analyzed for tactical data communication through the legacy radio systems as the first step towards guaranteed QoS. We have conducted various experiments such as the transmission error rate on certain tactical messages, performance evaluation of redundant transfers, the relationship between the transmission frame size and rate of error, the identification of error points in the transmission frame, and techniques to reduce the errors in both hopping and non-hopping modes. As a result of the performance experiments, The adaptive communication module which decides the redundant transmission or the Forward Error Correction(FEC) technique by analyzing channel status and current transmission status(hopping/non-hopping) of the legacy radio should be designed. the FEC technique in non-hopping, and the redundant transmission technique in hopping mode was recommended from the result of experiment with the frame size is 20bytes in non-hopping and 10Bytes frame size in hopping mode.

• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.137-147
• /
• 1999

This paper studies on the optimal bus network design in the framework of the set covering theory. The theory enables to cover passenger's loading and alighting areas as the set, and maximize the covering set as much as possible. In other words, it calculates the minimal set of the bus routes for covering whole bus passengers demand. After the optimal set of the bus routes is generated by the set covering theory, multimodal traffic equilibrium assignment is used for evaluating the generated set in terms of passenger's mode and route choice behavior. Whilst most previous works on it have been based on analyzing a specific route in a limited area, this study seeks to optimize the whole bus network.

• The Research Journal of the Costume Culture
• /
• v.27 no.6
• /
• pp.645-653
• /
• 2019

Laundry services are becoming more specialized and diversified. Therefore, this study investigated consumers' perceptions of professional laundry shops by analyzing social media data. For this purpose, text data from blogs, cafés, and Q&A sections ('Ji-Sik-In') on the portal site, naver.com, was collected. Sixty-four keywords were extracted from 2,213 social texts and transformed into a one-mode matrix using KrKwic, a program for the analysis of Korean text. Semantic network analysis was conducted to understand the network structure and the results were visualized using NodeXL. Keywords included fashion items and materials that require specialized professional laundry services, words related to the establishment of laundry shops, and laundry shop brands. Essential keywords of professional laundry shops included 'luxury,' 'footwear,' 'removal,' 'bag,' 'leather,' 'sneakers,' 'padding,' 'premium,' 'dyeing,' and 'franchise.' These results could be used to deduce that consumers perceive a professional laundry shop as a franchise shop offering specialized professional laundry services. A cluster analysis was conducted to identify the types of consumer perceptions of professional laundry shops. The network was divided into three groups: 'specialized professional laundry service,' 'laundry and repair of winter coats and jackets,' and 'the establishment of a professional laundry shop.' According to the results, consumers perceive professional laundry shops as franchises that offer specialized professional laundry services rather than general laundry services. Therefore, professional laundry shops need a strategy to develop special laundry services that differentiate them from other companies and communicate with consumers about these services.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.127-130
• /
• 2005

Internal cities such as gray level been enclosed to building forest are paying a lot of efforts and expenses to change to green city that park and street tree get put together. By the example, 'GREEN CITY of PUSAN 21' progress to decorate army facilities like the park, and to plant street trees in several places of city plan in Pusan. And urban environment that big cities of advanced nation are agreeable is making in the large park and road street trees at several places in downtown. Because price of tree for the park is very expensive, tree management system was all-important. In this paper, Motes deliver the sensor information in each tree through radio sensor network by server side. This information can use in state grasping of tree, harmful insects courtesy call etc and this system design was suggested to inform to mode of life administration scholars.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.81-90
• /
• 2006

The GNUnet proposed a file encoding method by 1KB block size to support anonimity of files, decentralizes encoded block to peers through unstructed mode and original data decoding method a block searching or encoded blocks. but, the encoding and block decentralizing method with $600\sim700MB$ large multimedia file appered two problems. First problem, it need addition R block and I block, which make about 4% of storage resource. Second problem, unstructured model added network load by broadcasting decentralizing method. Third problem, The critical point of keyword search function. This paper suggest variable encoding block size and structured model by block decentralizing solution. Suggested encoding method reduced block request supplementary block generation from 4% to 1%, network load by proposal structured model sending answer through dedicated peer to decentralize block and we defined content-based keyword and identifier of sharing file.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.13-19
• /
• 2009

A 440MHz wireless and passive surface acoustic wave (SAW) based chemical sensor was developed on a $41^{\circ}YX\;LiNbO_3$ piezoelectric substrate for simultaneous measurement of $CO_2$ gas and relative humidity (RH) using a reflective delay line pattern as the sensor element. The reflective delay line is composed of an interdigital transducer (IDT) and several shorted grating reflectors. A Teflon AF 2400 and a hydrophilic $SiO_2$ layer were used as $CO_2$ and water vapor sensitive films. The coupling of mode (COM) modeling was conducted to determine optimal device parameters prior to fabrication. According to simulation results, the device was fabricated and then wirelessly measured using the network analyzer. The measured reflective coefficient $S_{11}$ in the time domain showed high signal/noise (S/N) ratio, small signal attenuation, and few spurious peaks. In the $CO_2$ and humidity testing, high sensitivity ($2^{\circ}/ppm$ for $CO_2$ detection and $7.45^{\circ}/%$RH for humidity sensing), good linearity and repeatability were observed in the $CO_2$ concentration ranges of $75{\sim}375ppm$ and humidity levels of $20{\sim}80%$RH. Temperature and humidity compensations were also investigated during the sensitivity evaluation process.

• Journal of radiological science and technology
• /
• v.44 no.6
• /
• pp.655-661
• /
• 2021

Positron emission tomography (PET) images is affected by acquisition time, short acquisition times results in low gamma counts leading to degradation of image quality by statistical noise. Noise2Void(N2V) is self supervised denoising model that is convolutional neural network (CNN) based deep learning. The purpose of this study is to evaluate denoising performance of N2V for PET image with a short acquisition time. The phantom was scanned as a list mode for 10 min using Biograph mCT40 of PET/CT (Siemens Healthcare, Erlangen, Germany). We compared PET images using NEMA image-quality phantom for standard acquisition time (10 min), short acquisition time (2min) and simulated PET image (S2 min). To evaluate performance of N2V, the peak signal to noise ratio (PSNR), normalized root mean square error (NRMSE), structural similarity index (SSIM) and radio-activity recovery coefficient (RC) were used. The PSNR, NRMSE and SSIM for 2 min and S2 min PET images compared to 10min PET image were 30.983, 33.936, 9.954, 7.609 and 0.916, 0.934 respectively. The RC for spheres with S2 min PET image also met European Association of Nuclear Medicine Research Ltd. (EARL) FDG PET accreditation program. We confirmed generated S2 min PET image from N2V deep learning showed improvement results compared to 2 min PET image and The PET images on visual analysis were also comparable between 10 min and S2 min PET images. In conclusion, noisy PET image by means of short acquisition time using N2V denoising network model can be improved image quality without underestimation of radioactivity.

• Journal of Internet Computing and Services
• /
• v.9 no.2
• /
• pp.43-50
• /
• 2008

In IEEE 802.11b wireless LAN, stations keep synchronization by receiving beacons being periodically sent by the AP (access point) when they run in low power mode. Beacon transmission is delayed if wireless channel is busy at a scheduled TBTT (target beacon transmission time), and stations must be awake until they receive the delayed beacon. In this paper, we propose a scheme that stations get their transmission delayed if they have little time for successful data transmission by the next TBTT. Beacon transmission without delay is guaranteed at every TBTT with this method so that the awake time of low power stations to receive beacon can be reduced. The proposed method is simulated and its characteristics ore described with the analysis of the results. The measured results in terms of beacon delay show some enhancement in energy consumption.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.5
• /
• pp.19-28
• /
• 2012

Recently a grid and cloud computing collaboration have become a social issue. These collaborative network system, the P2P system based on this system. Distingui shed from the client/server systems, P2P systems in order to exchange information, its purpose and functions are divided according to the morphological Category. In accordance with the purposes and functions of information and data retrieval, remote program control and integration services for the offers. Most P2P systems client/server scalability, and management takes the form, but to overcome the disadvantages in terms of applying the mixed-mode system is increasing. And recently the distributed computing aspects of the service to users in order to provide suitable to accommodate the diverse needs of various types of mobile agent technology is needed. In this paper, as required by the mobile agent access to a remote resource access control and agent for the execution and management capabilities and improve the reliability of the mobile agent system designed to suggest.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.29-36
• /
• 2011

Dithering scheme has been widely used to improve the resolution of DCO(Digitally Controlled Oscillator) in conventional ADPLLs(All Digital Phase Locked Loop). In this paper a new resolution improvement scheme is proposed where a simple DAC is employed to overcome the problems of dithering scheme. A 2.4GHz LC-based DCO has been designed in a $0.13{\mu}m$ CMOS process with an enhanced frequency resolution for wireless local area network applications. It has a frequency tuning range of 900MHz and a resolution of 58.8Hz. The frequencies are controled by varactors in coarse, fine, and DAC bank. The DAC bank consists of an inversion mode NMOS varactor. The other varactor banks consist of PMOS varactors. Each varactor bank is controlled by 8bit digital signal. The designed DCO exhibits a phase noise of -123.8dBc/Hz at 1MHz frequency offset. The DCO core consumes 4.2mA from 1.2V supply.