• 수산해양교육연구
• /
• 제26권5호
• /
• pp.1083-1089
• /
• 2014

The aims of this study are to find out the possibility of the charcoal as a desiccant. The only humidity control under high temperature and high humidity environment can be provided to the thermal comfort at indoor environment. Functionality of charcoal is known to be deodorization, antiseptic effect, filtering effect and humidity control. But research related to humidity control in the country not yet. Thus, the dehumidification capacity of the charcoal experimental results to see the results were as follows : 1) Entering the experimental humidification is 148.02 g/h, 161.05 g/h and 243.2 g/h when air velocity was changed 1.5 m/s, 1.7 m/s and 2.0 m/s. 2) When the basis weight of the charcoal 2.0 m/s air velocity to obtain the largest number of adsorption capacity. 3) Dru bulb temperature and dew point temperature ware measured at front and rear of the charcoal. Absolute humidity is calculated from the measured Dry bulb temperature and dew point temperature. The quantity of dehumidification is calculated from absolute humidity is the largest 129.6 g/h at the air velocity 2.0 m/s.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.181-185
• /
• 2004

Electrokinetic bioremediation was conducted on phenanthrene-contaminated soil to study the effects of soil temperature and pH on microbial population and removal efficiency at different current densities from 0.63 to 3.13 mA cm$^{-2}$ . Microorganism used in the biodegradation of phenanthrene was Sphingomonas sp. 3Y, which was isolated from a diesel-contaminated site. The microorganism was successfully penetrated into the contaminated soil by electrokinetic phenomena and the highest microbial population was observed in the middle region of soil specimen where soil pH was near neutral. Therefore, phenanthrene removal occurred mainly at anode and middle parts of soil specimen due to a relatively high microbial population. Also, the highest removal efficiency of 68.8% was obtained at 1.88 mA cm$^{-2}$ while low degradation was detected at 3.13 mA cm$^{-2}$ . It was presumably because the soil temperature at 1.88 mAcm$^{-2}$ was close to the appropriate temperature of about 30'c while the temperature increase to above 45$^{\circ}C$ at 3.13 mA cm$^{-2}$ inhibited the microbial activity severely.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.193-200
• /
• 2015

Purpose: The purpose of this study was to investigate the energy saving effects and characteristics of plant growth in a greenhouse with an aluminum multi-layer curtain compared to a greenhouse with non-woven fabric. Method: The dimensions of both greenhouses $43m{\times}3.6m{\times}8m(L{\times}H{\times}W)$, and both used hot air heater systems for maintaining a constant temperature $15^{\circ}C$. Heating characteristics such as solar intensity, inside and ambient temperatures, and fuel consumption were measured and analyzed. Results: The changes of average temperature of both greenhouses during a 15-days (December 06 - 20) showed approximately $26^{\circ}C$ at around 2 pm when the ambient temperature was highest. The greenhouses were set by the heater to keep a temperature of $15^{\circ}C$ from 4 pm to 8 am the following day. The average heat loss (for 15 days) from the greenhouse with an aluminum multi-layer curtain was $161.2-268.4kJ/m^2{\cdot}h$ during the daytime and $152.3-198.1kJ/m^2{\cdot}h$ during the nighttime. The average heat loss (for 15 days) from the greenhouse with non-woven fabric was $155.7-258.9kJ/m^2{\cdot}h$ during the daytime and $144.9-207.0kJ/m^2{\cdot}h$ during the nighttime. The total heat loss (for one day) from the non-woven fabric system was $7,960kJ/m^2$($2,876kJ/m^2$ during the daytime, $5,084kJ/m^2$ during the nighttime). The heat supply over 36 days for the non-woven fabric system was higher than the aluminum multi-layer curtain system by $616.3-65,079.4kJ/m^2$. Conclusions: These results suggest that a greenhouse with an aluminum multi-layer curtain could save energy usage by 35% over a greenhouse with non-woven fabric.

• ALGAE
• /
• 제18권3호
• /
• pp.217-223
• /
• 2003

Seasonal growth and maturation process of Caulerpa okamurae were investigated in natural populations and in culture. Monthly sampling was carried out by SCUBA diving at Baekunpo, Busan, southeastern coast of Korea from November 1999 to October 2001. Growth of erect branches depended mainly on the water temperature in the natural habitat. Maximum length of erect branches was 14.0 $\pm$ 1.4 cm in June 2001 when the water temperature was 19.7$^{\circ}C$ and minimum was 2.8$\pm$0.2 cm in April when the water temperature was 14.7$^{\circ}C$. Fresh weight of erect branches was 3.9 $\pm$ 0.5 g in June 2001 and 0.2 $\pm$ 0.04 g in September 2000. Biomass of the population was maximum of 922.5 g dw${\cdot}m^{-2}$ in July and minimum of 125.6 g dw${\cdot}m^{-2}$ in April. Gametangial network was observed on the ramuli when the water temperature was over 19$^{\circ}C$ in August 2000 and June 2001. In the culture regime of 4 temperatures (15, 20, 25 and 30$^{\circ}C$) and 3 irradiances (20, 50 and 80 $\mu$mol${\cdot}m^{-2}{\cdot}s^{-1}$) combination, the maturation of excised erect branches was mainly affected by temperature. Maturation was induced under all irradiance conditions at 20 and 25$^{\circ}C$; under 80 $\mu$mol${\cdot}m^{-2}{\cdot}s^{-1}$ at 15$^{\circ}C$; and under 20 $\mu$mol${\cdot}m^{-2}{\cdot}s^{-1}$ at 30$^{\circ}C$. The highest rate of maturation was 64% under 20 $\mu$mol${\cdot}m^{-2}{\cdot}s^{-1}$ at 25$^{\circ}C$. These results suggested that developmental initiations of C. okamurae occurred at higher than 13$^{\circ}C$ and maturation took about 270 degree-days.

• 마이크로전자및패키징학회지
• /
• 제26권4호
• /
• pp.75-82
• /
• 2019

유연 태양 전지는 최근 휴대용 배터리, 웨어러블 소자, 로봇, 드론 및 비행기와 같은 광범위한 응용 분야로 인해 큰 주목을 받고 있다. 특히, 고효율 및 높은 신뢰성을 갖는 유연 실리콘 및 화합물 반도체 태양 전지의 요구가 계속 증가하고 있다. 본 연구에서는 유연 InGaP/GaAs 2중 접합 태양전지 모듈을 개발하였다. 특히 제작된 유연 태양전지 모듈의 신뢰성을 확보하기 위하여, 풍속 및 주위 온도가 태양 전지 작동 온도에 미치는 영향을 수치해석으로 분석하였다. 3종류의 풍속(0 m/s, 2.5 m/s 및 5 m/s) 및 2종류의 주변 온도 조건(25℃ 및 33℃)에 대하여 태양 전지 모듈의 온도 분포를 해석하였다. 유연 태양전지 모듈의 유연성은 굽힘 시험 및 굽힘 수치해석을 통하여 평가하였다. 25℃ 온도조건에서 풍속이 0 m/s 일 때, 태양 전지 셀의 최대 온도는 149.7℃이다. 풍속이 2.5 m/s로 증가되었을 경우, 태양 전지의 온도는 66.2℃로 크게 감소되었다. 또한 풍속이 5 m/s 인 경우, 태양 전지의 온도는 48.3℃로 급격히 감소함을 알 수 있었다. 주변 온도 또한 태양 전지의 작동 온도에 영향을 미친다. 2.5 m/s의 풍속에서 주변 온도가 33℃로 증가할 경우, 태양 전지의 온도는 74.2℃로 약간 증가하였다. 따라서 태양 전지 셀의 온도에 영향을 미치는 가장 중요한 인자는 풍속으로 인한 열 방출 효과임을 알 수 있었다. 또한 태양 전지의 최대 온도는 사용된 소재들의 유리 전이 온도보다 낮기 때문에, 열 변형 및 모듈의 열화 가능성은 매우 낮을 것으로 예측된다. 제작된 태양전지 모듈은 굽힘 반경 7 mm까지 굽힐 수 있어 비교적 우수한 유연성을 갖고 있었다. 또한 향후 neutral plane 해석을 통하여 태양전지 셀을 neutral plane에 위치시키면 유연성이 크게 증가할 것으로 예측된다.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1233-1238
• /
• 2014

In this thesis, it is investigated the characteristics of Dye Sensitized Solar Cell (DSSC) according to variation of $TiO_2$ thickness (6, 12, 18, and $24{\mu}m$) and three distinct $TiO_2$ sintering temperatures (350, 450 and $550^{\circ}C$) by XRD, SEM, I-V and UV-Vis spectrophotometer. According to sintering temperature, $TiO_2$ was transformed into the anatase structure at $350^{\circ}C$, rutile structure at $550^{\circ}C$ and further into the two structure at $450^{\circ}C$. With increasing thickness up to $18{\mu}m$ and sintering temperature up to $450^{\circ}C$, respectively, the irradiance rate increased in the range of 9~26 percent and 2.80~5.10 percent. Whereas a further increase to $24{\mu}m$ and $550^{\circ}C$, the irradiance rate decrease in the range of 4~11 percent and 30~47 percent. The conversion efficiency increased in the range of 2.80~5.01 and 3.03~5.01 with increasing thickness up to $18{\mu}m$ and sintering temperature up to $450^{\circ}C$. By contrast, increase to $24{\mu}m$ and $550^{\circ}C$, the conversion efficiency decreased in the range of 3.31~5.01 and 2.80~3.89, respectively. The DSSC that thickness of $TiO_2$ were $18{\mu}m$ and sintered at $450^{\circ}C$ exhibited the most excellent characteristics, in which open-circuit voltage, short-circuit current, Fill Factor and conversion efficiency are 0.69 V, $11.4mA/cm^2$, 0.64 and 5.01%, respectively.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.73-78
• /
• 2008

The fire hazards and combustion heat of puzzle mats in group day care home were analysed using variable external irradiation level. The fire hazards such as ignition time, ignition temperature, mass loss rate, and flame temperature profile were measured. Incident heat fluxes of $15kW/m^2$, $20kW/m^2$, $25kW/m^2$, $35kW/m^2$, $50kW/m^2$ and $75kW/m^2$ were selected for these experiments. All samples were tested in the horizontal orientation and were wrapped in a single layer of aluminium foil. Each sample was nominally 20mm thick and 100mm square. Five samples of puzzle mat were tested in the study : Type A, B, C, D and E. Type A, B and C are all general grades whereas Type D and E are both Flame retardant grades. As results, Type E of FR-grade showed the best characteristics in safety of the early fire from ignition time, critical heat flux, and ignition and flame temperature data of this study. All specimen of G-grade(Type A, B and C), however, showed the weak in safety of fire.

• Smart Structures and Systems
• /
• 제31권1호
• /
• pp.1-11
• /
• 2023

Assessment of the compressive strength of concrete plays a major role during formwork removal and in the prestressing process. In concrete, temperature changes occur due to hydration which is an influencing factor that decides the compressive strength of concrete. Many methods are available to find the compressive strength of concrete, but the maturity method has the advantage of prognosticating strength without destruction. The temperature-time factor is found using a LM35 temperature sensor through the IoT technique. An experimental investigation was carried out with 56 concrete cubes, where 35 cubes were for obtaining the compressive strength of concrete using a universal testing machine while 21 concrete cubes monitored concrete's temperature by embedding a temperature sensor in each grade of M25, M30, M35, and M40 concrete. The mathematical prediction model equation was developed based on the temperature-time factor during the early age compressive strength on the 1^st, 2^nd, 3^rd and 7^th days in the M25, M30, M35, and M40 grades of concrete with their temperature. The 14^th, 21^st and 28^th day's compressive strength was predicted with the mathematical predicted equation and compared with conventional results which fall within a 2% difference. The compressive strength of concrete at any desired age (day) before reaching 28 days results in the discovery of the prediction coefficient. Comparative analysis of the results found by the predicted mathematical model show that, it was very close to the results of the conventional method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제6권2호
• /
• pp.21-41
• /
• 1982

Viscosity, especially characteristic among various properties of visco-elastic fluids such as high polymer solutions, is affected mainly by temperature and concentration. Hence, it is important for fluid engineering to express, by some equations, how the fluid characteristics vary with the change of temperature and concentration and to analyze them to obtain consistent viscous characteristics. High polymer solutions, synthetic products of modern chemical industry, suggest many interesting investigations because they are typical visco-elastic materials. Experimentation was made to derive some useful fluid characteristic equations of SEPARAN-NP10 (polyacylamide) expressed by n (flow behavior index) and K' (consistency index) when it is given temperature and concentration variation. To measure viscosity, capillary viscometer was adopted and the range of experimentation is 0-2,000 P.P.M. in concentration and 15-55 .deg.C in temperature. The experimental results are summarized as follows: The flow behavior index n 1) has nearly constant results irrespective of temperature variation at same conentration and the results are shown in (Table. 4-4-3) 2) has following equation, regardless of temperature, for the variation of concentration. n=-1.0765*10$^{-4}$ P+0.9915 (P:P.P.M.) The consistency index K' 1) has different results for the variation of temperature at same concentration and the results are given in (Table.4-7-2) 2) has following equation for the variation of concentration at same temperature. log 10$^{4}$K' =6.4785*10$^{-4}$ P-1.0529 (P:P.P.M)

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1296-1299
• /
• 2012

$YBa_2Cu_3O_{7-x}$ thin films were fabricated by the spin-coating method on $SiO_2$/Si substrate using an alkoxide-based sol-gel method. The structural and electrical properties were investigated for various 1st annealing temperature. Due to the formation of the polycrystalline single phase, synthesis temperature was observed at around $720^{\circ}C-800^{\circ}C$. $YBa_2Cu_3O_{7-x}$ thin films with the 1st annealing temperature of $450^{\circ}C{\sim}500^{\circ}C$ showed the single XRD patterns without the second phase, such as $YBa_2Cu_4O_8$. The thickness of films was approximately $0.23{\mu}m{\sim}0.27{\mu}m$. Aerage grain size, resistance and temperature coefficient of resistance (TCR) of $YBa_2Cu_3O_{7-x}$ thin films with the 1st annealing temperature of $500^{\circ}C$ were $0.27{\mu}m$, $59.7M{\Omega}$ and -3.7 %/K, respecvitely.