• 한국환경과학회지
• /
• 제11권7호
• /
• pp.679-686
• /
• 2002

Turbulence greatly influence on atmospheric flow field. In the atmosphere, turbulence is represented as turbulent diffusion coefficients. To estimate turbulent diffusion coefficients in previous studies, it has been used constants or 2-level method which divides surface layer and Ekman layer. In this study, it was introduced Smagorinsky method which estimates turbulent diffusion coefficient not to divide the layer but to continue in vertical direction. We simulated 3-D flow model and TKE equation applied turbulent diffusion coefficients using two methods, respectively. Then we showed the values of TKE and the condition of each term to TKE. The results of Smagorinsky method were reasonable. But the results of 2-level method were not reasonable. Therefor, it had better use Smagorinsky method to estimate turbulent diffusion coefficients. We are expected that if it is developed better TKE equation and model with study of computational method in several turbulent diffusion coefficients for reasonably turbulent diffusion, we will able to predict precise wind field and movements of air pollutants.

• 한국수자원학회논문집
• /
• 제51권1호
• /
• pp.61-70
• /
• 2018

본 연구에서는 댐의 효율적인 계획 및 운영을 위해 댐 저수지의 최적 퇴사위 결정 방법에 대해 고찰하였다. 현재 우리나라는 안전한 설계에 의거하여 댐 저수지 사수위 내의 퇴사위 결정 방법은 비교적 높게 산정되는 수평퇴사법을 주로 적용하고 있지만, 댐 저수지의 퇴사위는 정확하게 계획되어야 하며, 이는 댐 생애주기 평가 차원에서도 중요한 요소이다. 댐 저수지의 퇴사위 결정을 위해 대표적인 방법으로는 RMA-2와 연계된 SED-2D의 모형에 의한 방법, 수평퇴사법, 면적증분법(area increment method), 경험적면적감소법(empirical area reduction method)이 있다. 본 연구에서는 최적 퇴사위 결정을 위해 이를 산정하여 2007년 기준 실측 퇴사위와 비교하였다. 또한, 현재 및 미래 퇴사위를 예측하여 각 방법별로 경향과 추이를 분석하였다. 실측 퇴사위와 산정된 퇴사위를 비교한 결과, 경험적면적감소법이 실측값과 가장 근사하게 산정된 것을 확인할 수 있었으며, 현재 및 미래의 퇴사위는 전반적으로 과거 퇴사위의 경향과 추이를 따라가는 것으로 확인되었다. 따라서, 본 연구의 결과를 토대로 보면 경험적 면적감소법의 이용이 적절할 것으로 판단되고, 모형에 의해 분석 결과의 타당성을 검정하는 것이 합리적이라 생각된다.

• Interaction and multiscale mechanics
• /
• 제1권2호
• /
• pp.191-209
• /
• 2008

In this paper, we model grain boundary evolution based on a multiple level set method. Grain boundary migration under a curvature-induced driving force is considered and the level set method is employed to deal with the resulting topological changes of grain structures. The complexity of using a level set method for modeling grain structure evolution is due to its N-phase nature and the associated geometry compatibility constraint. We employ a multiple level set method with a predictor-multicorrectors approach to reduce the gaps in the triple junctions down to the grid resolution level. A ghost cell approach for imposing periodic boundary conditions is introduced without solving a constrained problem with a Lagrange multiplier method or a penalty method. Numerical results for both uniform and random grain structures evolution are presented and the results are compared with the solutions based on a front tracking approach (Chen and Kotta et al. 2004b).

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1234-1245
• /
• 2018

The risk of multi-unit nuclear power plants (NPPs) at a site has received considerable critical attention recently. However, current probabilistic safety assessment (PSA) procedures and computer code do not support multi-unit PSA because the traditional PSA structure is mostly used for the quantification of single-unit NPP risk. In this study, the main purpose is to develop a multi-unit Level 2 PSA method and apply it to full-power operating six-unit OPR1000. Multi-unit Level 2 PSA method consists of three steps: (1) development of single-unit Level 2 PSA; (2) extracting the mapping data from plant damage state to source term category; and (3) combining multi-unit Level 1 PSA results and mapping fractions. By applying developed multi-unit Level 2 PSA method into six-unit OPR1000, site containment failure probabilities in case of loss of ultimate heat sink, loss of off-site power, tsunami, and seismic event were quantified.

• 대한안전경영과학회지
• /
• 제2권2호
• /
• pp.29-40
• /
• 2000

In this paper, under JIT kanban system designed by Moeeni, each performance measures (service level, inventory level) identify the robust optimal level at a uncertain environment, and when there are multiple performance characteristics, it propose the optimal design-method and the optimal level decision-method, which consider multiple performance characteristics.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.268-275
• /
• 2015

This paper proposes a method of switching to improve power loss for the single-phase three-level NPC inverter. The conventional switching methods, which are called as the bipolar and unipolar switching methods, are used for single phase inverters using three-level topology. However, these switching method have disadvantage in the power loss. Because all of the switch are operated. To reduce the power loss of the three-level NPC inverter, clamp switching method is introduced in this paper. This way, one of the lag is fixed that switching loss is reduced. This paper analyzes and compares power losses of unipolar method and clamp method. The validity of the power loss analysis is verified through the simulation and experimental results.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제2권12호
• /
• pp.865-872
• /
• 2013

Two-level 형태소 분석 방법은 규칙 기반 방법 중 하나로 형태소의 변화 현상을 규칙으로 처리하고, 기본 어휘 사전을 기반으로 형태소 결합관계를 분석한다. 이는 언어에 독립적인 방법으로 한국어에 대해서도 일부 구축되어 적용됨이 증명되었다. 그러나 기존 한국어에 대한 Two-level 형태소 분석기는 사전을 수동으로 구축하여 규모가 매우 작고 실제 사용에 제한적이었으며, 과분석이 많아 효율성이 매우 떨어졌다. 본 논문은 세종 품사부착 말뭉치에서 대규모의 Two-level 어휘 사전을 자동으로 구축하여 형태소 분석기의 적용 범위를 넓히고, 형태소간의 결합관계를 어휘 정보와 어휘 형태에 따른 하위품사 정보를 이용하여 분석함으로써 형태소 분석기의 성능을 향상시킬 수 있는 방법을 제시한다. 실험 결과, 기존의 방법보다 형태소 분석기의 과분석을 68% 이상 줄여 f-measure를 25.5% point 이상 향상시킬 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.263-269
• /
• 2018

In this study, a selective inverter operation between a 2-level voltage source converter (VSC) and a 3-level T-type VSC (3LT VSC) is proposed to improve the efficiency of a 3LT VSC. The 3LT VSC topology, except for its neutral-point switches, has similar operations as that of the 2-level VSC. If an operation mode is changed according to efficiency, the efficiency can be improved because efficiencies of each methods are depending on current and MI (Modulation Index). The proposed method calculates the power losses of the two topologies and operates as the having lower losses. To calculate the losses, the switching and conduction losses based on the operation mode of each topology were analyzed. The controller determined the operation mode of the 2- or 3-level VSC based on the power loss calculated during every cycle. The validity of the proposed control scheme was investigated through simulation and experiments. The waveform and average efficiency of each method were compared.

• 대한치과보철학회지
• /
• 제42권2호
• /
• pp.238-247
• /
• 2004

Statement of problem: Major objective in making on implant-supported prosthesis is the production of superstructure that exhibits a passive fit when connected to multiple abutments. One requirement to ensure passive fit is to make an accurate impression. Purpose : The purpose of this study was to compare the accuracy of master cast fabricated by using different impression methods at the different impression levels. Material and method: The master model used in this study was resin block having low implant analogs. Impression method studied were 1) direct method on fxiture level (Group FIX-D), 2) indirect method on fixture level(Group FIX-I), 3) modified indirect method on fixture level(Group FIX-M), 4) direct method on abutment level(Group AB-D) and 5) indirect method on abutment level(Group AB-I). Each of the five groups took 10 impressions. Fifty impressions were made for master cast by using Impregum $F^{(R)}$ impression material loaded on individual tray. Three dimensional measuring microscope was used to measure the inter-implant distance. Error rate of each inter-implant distance were calculated and evaluated. Results : The results were as follows. 1. Group FIX exhibited higher accuracy than group AB. 2. In group FIX, modified indirect method showed the highest accuracy, while indirect method showed the lowest accuracy. In group Ab, indirect method showed the higher accuracy than direct method. 3. Group FIX showed larger horizontal error than group AB. But, group AB showed the larger vertical error than group FIX. 4. Group Fix-M showed smallest vertical and horizontal error. Conclusion: An impression method have more effect on accuracy of master model than an impression level. A modified indirect method showed smallest vertical and horizontal error.

• 한국지능시스템학회논문지
• /
• 제19권5호
• /
• pp.706-712
• /
• 2009

본 논문에서는 프레스공정라인에서 발생하는 고장을 감지하고 분류하기 위한 고장진단기법을 제안한다. 또한 윤활유 레벨을 자동감지 하기 위한 방법도 제안하다. 제안한 방법에서는 FFT 주파수해석과 여러 경계인수를 갖는 ART2 신경회로망을 사용하며, LabVIEW를 이용하여 고장진단 및 윤활유 레벨 자동감시를 위한 GUI(Graphical User Interface) 프로그램을 제작하여 고장진단을 수행하였다. 실험결과들로부터 제안한 유도전동기 고장진단 및 윤활유 레벨 자동감시시스템의 성능을 확인하였다.