• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.2
• /
• pp.271-300
• /
• 1993

The purpose of this study was to analyze the stress distribution at supporting bone according to the types of connection modality between implant and tooth in the superstrcture. This investigation evaluated the stress patterns in a photoelastic model produced by three different types of dental implants such as Branemark, Steri-Oss, IMZ and resin tooth using the techniques of quasi three dimensional photoelasticity. The teeth-supported bridge had a first molar pontic supported by second premolar and second molar as a control group. The implant and toothsupported bridge had a first molar pontic supported by second premolar and implant posterior retainer as an experimental group. Prostheses were mechanically connected to an adjacent second premolar by the rigid of nonrigid connection, Nonrigid connection used an attachment placed between the tooth-supported and fixture-supported component. The female(keyway) of attachment was placed on the distal end of the retainer supported by the tooth ; the male(Key) of attachment connected to the osseointegrated bridge was engaged into the keyway. All prostheses were casted in the same nonprecious alloy and were cemented and screwed on their respective abutments and implants. 16㎏ of vertical loads on central fossae of second premolar, first molar pontic, implant of second molar were applied respectively and 6.5㎏ of inclined load on middle buccal surface of first molar pontic was applied. The results were as follows : 1. Under the vertical load on the central fossa of first mloar pontic, the stress developed at the apex of tooth of implat was more uniformly distributed in the case of nonrigid connection than in the case of rigid connection. 2. Under the vertical load on the central fossa of first molar pontic, the stress developed around the cervical area of tooth of implant was larger in the case of rigid connection than in the case of nonrigid connection because the bending moment was more occured in the case of rigid connection than in the case of nonrigid connection. 3. Stress was more restricted to the loaded side of nonrigid connection than to that of rigid connection 4. Under the inclined load. The set screw loosening of implant was more easily occured in the case of nonrigid connection than in the case of rigid connection due to torque moment. 5. In the case of Branemark implant, the stress concentration in second premolar was larger and the stress developed around the cervical area of implant was lower than any other cases under the vertical load, because Branemark implant with the flexible gold screw was showed in incline toward second premolar by a bending moment. 6. The stress developed around the apex of tooth or implant was more uniformly distributed in the case of Steri-Oss implant with stiff screw than in the case of Branemark implant under the vertical load. But, the stress developed around the cervical area of the Steri-Oss implant was larger than that of any other implants because bending moment was occured by vertical migration of second premolar. 7. The stress distribution in the case of IMZ implant was similar to the case of natural teeth under small vertical load. But, the residual stress around the implant was showed to occurdue to deformation of IMC and sinking of screw under larger vertical load.

• Journal of the Korean Society of Costume
• /
• v.32
• /
• pp.313-336
• /
• 1997

Nineteen stimulus photograghs varied in hue and color scheme of one clothing style of Korean dress worn by a female were used to investigate the effect of color color scheme and structure on impression formation for Korean dress. Subjects were 77 male and 86 female undergraduate and graduate students. The stimuli c9onsisted of two sets(cool and warm) of four similar color schemes two sets (cool and warm in Chima color) of five contrasting color schemes and one extra stimulus triad 3 hue base. Structures were de-fined by color schemes of Kit.Korum toward the color schemes of Jokori and Chima. Stimu-lus photogragh selected from Korean dress fashion magazines was managed and varied in hues and color schemes to Kit Korum Jokori and Chima according to Korean Standard Color through scanning and Adobe photoshop 3.0 program and then pictured through slide printer(HR-6000). Each subject assessed 19 stimulus color photographs with incorporated 7 point semantic differential response scale. The data were analyzed by frequency mean factor analysis t-test ANOVA and Scheffe test. Results indicate impression ofrmations are af-fected by clothing cues. 1) Four factors emerged to account for dimensional structure of impressions of female features on Korean dress. These four factors were titled as(1) preference.evaluation (2) individuality.attention (3) youth and (4) friendshio. The preference.evaluation factor was the largest including eleven adjectives and accounting for 29.62% of the variances. 2) Almost every clothing cue(color, color scheme, structure) had some effects on im-pressions formed But the color of Chima did not form the effects on impression of prefer-ence.evaluation factor. The effect of related color scheme was the most influential clothing cue on impressions of preference.evalation factor and friendship factor whereas the ef-fect of contrasting color scheme was the most influential clothing cue on impressions of indi-viduality.attention factor and youth factor. The effect of cool color of Chima was the most influential clothing cue on impression of indi-viduality.attention factor whereas the effect of warm color of Chima was the most influen-tial clothing cue on impressions of youth factor and friendship factor. The effect of Jokori/Chima.Kit.Korum structure was the most influential clothing cue on impressions of pref-erence.evaluation factor and youth factor whereas the effect of Kit.Korum/Jokori.Chima structure was the most influential clothing cue on impressions of individuality.attention factor and friendship factor. 3) The interaction effects were appeared among clothing cues. Significant interaction effects between color schemes(similar and contrasting) and colors of Chima(cool and warm were appeared on impressions of prefer-ence.evaluation factor imdividuality.atten-tion factor and friendship factor, Significant interaction effects between color schemes (similar and contrasting) and structures (Jokori.Chima.Kit.Korum; Jokori.Kit.Koru-m/Chima;Jokori/Chima.Kit.Korum;Kit.Korum/Jokori.Chima) were appeared on impressions of preference.evaluation factor youth factor and friendship factor. Signifi-cant interaction effects between colors(cool and warm) and structures were appeared on impressions of individuality.attention factor youth factor and friendship factor. Sighifi-cant interaction effects between colors(cool and warm) and structures were appeared on impressions of individuality.attention factor youth factor and friendship factor. Significant interaction effects among clothing cues(color color schemes and structures) were appeared on all impression factors. The friendship factor was the most friquently affected impression factor by interaction effects among clothing cues. In summary the clothing was used as nonverbal cues in the effect on impression for-mation of female dressed in Korean dress. it concluded that color schemes worked as cen-tral traits and colors of Chima and structures worked as peripheral traits in the formation of impression of the female clothed in Korean dress. hence organizing our impressions with respect to the parts of the Korean dress in re-lation to the whole holistic perceptual pro-cess Gestalt approach was used and supported.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.3
• /
• pp.147-153
• /
• 2013

Functional game, which is the combination of play and learning and a futuristic tool, can minimize the dysfunction and maximize the proper functions, and furthermore, has taken root as a new alternative that can change the game industry and game culture. Recently, the focus of game and education markets is shifting to the development of more advanced learning contents, rather than emphasizing the self-control and motivation of users. Along with that, the game market has excluded the socially dysfunctional elements, such as the addiction and learning disabilities, and has witnessed a diversification into the human-friendly entertainment business that emphasizes the mental and physical health and pursues scientific educational effects. In addition, functional games are expanding its reach from the professional sectors - such as medical aide/medical learning, military simulation, health, auxiliary tools, special education and learning tools - to the realm of routine education, mental health, etc., and has seen a steady growth. However, most functional games, which are being currently planned and developed to cope with the special characteristics of the market, have not undergone accurate scientific assessment of their functions and have not proven their effectiveness. An overwhelming proportion of the functional games are being developed based on the intuition and experience of game developers. Moreover, the type of games, which involve the repetition of simple tasks or take the form of simple puzzles, cannot effectively combine the practically interesting factors and the learning effects. Most games incorporate unscientific methods leading to the vague anticipation of improvement in functions, rather than the assessment of human functions. In this paper, a study was conducted to present the measures that could maximize the effects of functional games in relation to the changes in the visual and auditory stimulations in order to maximize the effects of functional games, i,e., the immersion and concentration. To compare the degree of effects arising from the visual stimulation, the functional game contents made in the form of 2D and 3D were utilized. In addition. ultra sound and 3-dimensional functional game contents were utilized to compare the degree of effects resulting from the changes in the auditory stimulation. The brainwave of the users were measured while conducting the experiments related to the response to the changes in visual and auditory stimulations in 3 steps, and the results of the analysis were compared.

• Journal of Korea Water Resources Association
• /
• v.41 no.12
• /
• pp.1219-1230
• /
• 2008

Stream inflows induced by flood runoffs have a higher density than the ambient reservoir water because of a lower water temperature and elevated suspended sediment(SS) concentration. As the propagation of density currents that formed by density difference between inflow and ambient water affects reservoir water quality and ecosystem, an understanding of reservoir density current is essential for an optimization of filed monitoring, analysis and forecast of SS and nutrient transport, and their proper management and control. This study was aimed to quantify the characteristics of inflow density current including plunge depth($d_p$) and distance($X_p$), separation depth($d_s$), interflow thickness($h_i$), arrival time to dam($t_a$), reduction ratio(${\beta}$) of SS contained stream inflow for different flood magnitude in Daecheong Reservoir with a validated two-dimensional(2D) numerical model. 10 different flood scenarios corresponding to inflow densimetric Froude number($Fr_i$) range from 0.920 to 9.205 were set up based on the hydrograph obtained from June 13 to July 3, 2004. A fully developed stratification condition was assumed as an initial water temperature profile. Higher $Fr_i$(inertia-to-buoyancy ratio) resulted in a greater $d_p,\;X_p,\;d_s,\;h_i$, and faster propagation of interflow, while the effect of reservoir geometry on these characteristics was significant. The Hebbert equation that estimates $d_p$ assuming steady-state flow condition with triangular cross section substantially over-estimated the $d_p$ because it does not consider the spatial variation of reservoir geometry and water surface changes during flood events. The ${\beta}$ values between inflow and dam sites were decreased as $Fr_i$ increased, but reversed after $Fr_i$>9.0 because of turbulent mixing effect. The results provides a practical and effective prediction measures for reservoir operators to first capture the behavior of turbidity inflow.

• Journal of dental hygiene science
• /
• v.9 no.2
• /
• pp.161-167
• /
• 2009

The purpose of this Study was to examine the effect of perfectionism on stress and anxiety during scaling practice in an effort to find efficient way of helping students with getting good skills. The subjects in this study were students who practiced a scaling at the oral hygiene practice lab in the Department of dental hygiene in S college from May 1 to May 31, 2008. They were divided into four groups based on their subscales of perfectionism : mixed perfectionist group, achievement striving perfectionist group, failure avoidance perfectionist group and non-perfectionist group. The measurements used were Two-Dimensional Perfectionism Scale, Stress level, Trait anxiety, State anxiety. There were no significant differences in the stress level before practice between 4 groups. There were significant differences in trait anxiety, state anxiety, total anxiety before scaling practice between 4 groups. However, these results were due to differences between mixed perfectionist group and non-perfectionist group. After practice, total anxiety was decreased from 93.71 to 89.66 and state anxiety was decreased from 45.49 to 43.38. These results were statistically significant. In order to investigate the influence of achievement striving factor and failure avoidance factor on the change of state anxiety during the scaling practice Standard Multiple Regression were employed for the statistical analysis. Failure avoidance factor was related with the increase of state anxiety during the scaling practice. So leachers have to give all effort to reduce the anxiety of students during scaling practice and provide students with motivation of achievement.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.2
• /
• pp.62-79
• /
• 2017

The principle of repairing the architectural heritage in China was first presented by Liangsicheng of Society for Research in Chinese Architecture in the 1930s, and it was stated as "Restoration of Historic Condition or Preservation of Existing Condition" in 1961 in the "Provisional Regulations on the Protection and Management of Cultural Relics" after various repair experiences under the social and political background of the 1950s. Restoration of historic condition generally means restoration to original shape, and because architectural heritage was often repaired based on similar principle in Korea and Japan in the early and mid 20th century, it can be said that the restoration of historic condition was a universal and leading principle in this period in Northeast Asia. In China, however, the preservation of existing condition is equally specified along with the restoration of historic condition. When considering the leading trend of the time, it seems to be rather unexpected, which leads to questions about the formation process and meaning. The research on Liangsicheng, which first suggested the principle of repair, is very important, but there is a lack of three-dimensional analysis of his principles compared with active research on international principles in China. In order to understand the process of formation and its meaning of the principle of repair in China, we first need to analyze the principle proposed by Liangsicheng, and it is necessary to comprehensively examine how the principle have changed under the social background surrounding architectural heritage conservation after the founding of the People's Republic of China(PRC). In this paper, we first show that Liangsicheng has proposed a principle of restoration of historic condition with important values in the originality, and at the same time he opened the possibility of preservation of existing condition for the result of value judgment or realistic reason. In addition, we examine the process of equalizing preservation of existing condition with a restoration of historic condition as a realistic principle due to the influence of Soviet architectural heritage conservation system and Chinese economic development oriented policy after the founding of PRC.

• Journal of Environmental Impact Assessment
• /
• v.30 no.5
• /
• pp.271-296
• /
• 2021

Since the thermal stratification in a reservoir inhibits the vertical mixing of the upper and lower layers and causes the formation of a hypoxia layer and the enhancement of nutrients release from the sediment, changes in the stratification structure of the reservoir according to future climate change are very important in terms of water quality and aquatic ecology management. This study was aimed to develop a data-driven inflow water temperature prediction model for Daecheong Reservoir (DR), and to predict future inflow water temperature and the stratification structure of DR considering future climate scenarios of Representative Concentration Pathways (RCP). The random forest (RF)regression model (NSE 0.97, RMSE 1.86℃, MAPE 9.45%) developed to predict the inflow temperature of DR adequately reproduced the statistics and variability of the observed water temperature. Future meteorological data for each RCP scenario predicted by the regional climate model (HadGEM3-RA) was input into RF model to predict the inflow water temperature, and a three-dimensional hydrodynamic model (AEM3D) was used to predict the change in the future (2018~2037, 2038~2057, 2058~2077, 2078~2097) stratification structure of DR due to climate change. As a result, the rates of increase in air temperature and inflow water temperature was 0.14~0.48℃/10year and 0.21~0.41℃/10year,respectively. As a result of seasonal analysis, in all scenarios except spring and winter in the RCP 2.6, the increase in inflow water temperature was statistically significant, and the increase rate was higher as the carbon reduction effort was weaker. The increase rate of the surface water temperature of the reservoir was in the range of 0.04~0.38℃/10year, and the stratification period was gradually increased in all scenarios. In particular, when the RCP 8.5 scenario is applied, the number of stratification days is expected to increase by about 24 days. These results were consistent with the results of previous studies that climate change strengthens the stratification intensity of lakes and reservoirs and prolonged the stratification period, and suggested that prolonged water temperature stratification could cause changes in the aquatic ecosystem, such as spatial expansion of the low-oxygen layer, an increase in sediment nutrient release, and changed in the dominant species of algae in the water body.

• Progress in Medical Physics
• /
• v.27 no.2
• /
• pp.64-71
• /
• 2016

We develop a manufacture procedure for the production of a patient specific customized bolus (PSCB) using a 3D printer (3DP). The dosimetric accuracy of the 3D-PSCB is evaluated for electron beam therapy. In order to cover the required planning target volume (PTV), we select the proper electron beam energy and the field size through initial dose calculation using a treatment planning system. The PSCB is delineated based on the initial dose distribution. The dose calculation is repeated after applying the PSCB. We iteratively fine-tune the PSCB shape until the plan quality is sufficient to meet the required clinical criteria. Then the contour data of the PSCB is transferred to an in-house conversion software through the DICOMRT protocol. This contour data is converted into the 3DP data format, STereoLithography data format and then printed using a 3DP. Two virtual patients, having concave and convex shapes, were generated with a virtual PTV and an organ at risk (OAR). Then, two corresponding electron treatment plans with and without a PSCB were generated to evaluate the dosimetric effect of the PSCB. The dosimetric characteristics and dose volume histograms for the PTV and OAR are compared in both plans. Film dosimetry is performed to verify the dosimetric accuracy of the 3D-PSCB. The calculated planar dose distribution is compared to that measured using film dosimetry taken from the beam central axis. We compare the percent depth dose curve and gamma analysis (the dose difference is 3%, and the distance to agreement is 3 mm) results. No significant difference in the PTV dose is observed in the plan with the PSCB compared to that without the PSCB. The maximum, minimum, and mean doses of the OAR in the plan with the PSCB were significantly reduced by 9.7%, 36.6%, and 28.3%, respectively, compared to those in the plan without the PSCB. By applying the PSCB, the OAR volumes receiving 90% and 80% of the prescribed dose were reduced from $14.40cm^3$ to $0.1cm^3$ and from $42.6cm^3$ to $3.7cm^3$, respectively, in comparison to that without using the PSCB. The gamma pass rates of the concave and convex plans were 95% and 98%, respectively. A new procedure of the fabrication of a PSCB is developed using a 3DP. We confirm the usefulness and dosimetric accuracy of the 3D-PSCB for the clinical use. Thus, rapidly advancing 3DP technology is able to ease and expand clinical implementation of the PSCB.

• Journal of Radiation Protection and Research
• /
• v.32 no.3
• /
• pp.105-110
• /
• 2007

Purpose : In spite of recent remarkable improvement of diagnostic imaging modalities such as CT, MRI, and PET and radiation therapy planing systems, ICR plan of uterine cervix cancer, based on recommendation of ICRU38(2D film-based) such as Point A, is still used widely. A 3-dimensional ICR plan based on CT image provides dose-volume histogram(DVH) information of the tumor and normal tissue. In this study, we compared tumor-dose, rectal-dose and bladder-dose through an analysis of DVH between CTV plan and ICRU38 plan based on CT image. Method and Material : We analyzed 11 patients with a cervix cancer who received the ICR of Ir-192 HDR. After 40Gy of external beam radiation therapy, ICR plan was established using PLATO(Nucletron) v.14.2 planing system. CT scan was done to all the patients using CT-simulator(Ultra Z, Philips). We contoured CTV, rectum and bladder on the CT image and established CTV plan which delivers the 100% dose to CTV and ICRU plan which delivers the 100% dose to the point A. Result : The volume$(average{\pm}SD)$ of CTV, rectum and bladder in all of 11 patients is $21.8{\pm}6.6cm^3,\;60.9{\pm}25.0cm^3,\;111.6{\pm}40.1cm^3$ respectively. The volume covered by 100% isodose curve is $126.7{\pm}18.9cm^3$ in ICRU plan and $98.2{\pm}74.5cm^3$ in CTV plan(p=0.0001), respectively. In (On) ICRU planning, $22.0cm^3$ of CTV volume was not covered by 100% isodose curve in one patient whose residual tumor size is greater than 4cm, while more than 100% dose was irradiated unnecessarily to the normal organ of $62.2{\pm}4.8cm^3$ other than the tumor in the remaining 10 patients with a residual tumor less than 4cm in size. Bladder dose recommended by ICRU 38 was $90.1{\pm}21.3%$ and $68.7{\pm}26.6%$ in ICRU plan and in CTV plan respectively(p=0.001) while rectal dose recommended by ICRU 38 was $86.4{\pm}18.3%$ and $76.9{\pm}15.6%$ in ICRU plan and in CTV plan, respectively(p=0.08). Bladder and rectum maximum dose was $137.2{\pm}50.1%,\;101.1{\pm}41.8%$ in ICRU plan and $107.6{\pm}47.9%,\;86.9{\pm}30.8%$ in CTV plan, respectively. Therefore, the radiation dose to normal organ was lower in CTV plan than in ICRU plan. But the normal tissue dose was remarkably higher than a recommended dose in CTV plan in one patient whose residual tumor size was greater than 4cm. The volume of rectum receiving more than 80% isodose (V80rec) was $1.8{\pm}2.4cm^3$ in ICRU plan and $0.7{\pm}1.0cm^3$ in CTV plan(p=0.02). The volume of bladder receiving more than 80% isodose(V80bla) was $12.2{\pm}8.9cm^3$ in ICRU plan and $3.5{\pm}4.1cm^3$ in CTV plan(p=0.005). According to these parameters, CTV plan could also save more normal tissue compared to ICRU38 plan. Conclusion : An unnecessary excessive radiation dose is irradiated to normal tissues within 100% isodose area in the traditional ICRU plan in case of a small size of cervix cancer, but if we use CTV plan based on CT image, the normal tissue dose could be reduced remarkably without a compromise of tumor dose. However, in a large tumor case, we need more research on an effective 3D-planing to reduce the normal tissue dose.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.159-163
• /
• 2005

The propriety between suppliers and demanders in geometric design is very important. Although the final purpose of constructing roads is to concern about the driver s comfort, unfortunately, it has not been considered so far. We've considered the regularity and quickness in considering driver's comfort but there should be considered the safety for the accident as well. If drivers are appeared to be more speeding than designer's intention, there will be needed some supplements to increase the safety rate for the roads. Even if both an upward and downward section are supposed to exist at the same time for solid geometry of the roads like this, it is true that the recent design for the 3-D solid geometry section has been done as flat 2-D and the minimum plane curve radius and the maximum cant have been decided just by calculating without considering operating speed between an upward and downward section at the same point. In this investigation, thus, I'd like to calculate the safety of the cant by considering the speed features of the solid geometry for the first lane of four lane rural roads. To begin with, we investigated the driving speed of the car, which is not been influenced by a preceding car to analyze the influence of the geometrical structure by using Nc-97. Secondly, we statistically analyzed the driving features of the solid geometry after comparing the 6 sections, that is, measuring the driving speed feature at 12 points and combining the influence of the vertical geometry and plane geometry to the driving speed of the plane curve which was researched before. Finally, we estimated the value of cant which considers the driving speed not by using it which has applied uniformly without considering it properly, though there were some differences between a designed speed and driving speed through the result of the basic statistical analysis but by introducing the new safety rate rule, a notion of ${\alpha}$. As a result of the research, we could see the driving features of the car and suggest the safety rate which considers these. For considering the maximum cant, if we apply the safety rate, the result of this experiment, which considers 3-D solid geometry, there'll be the improvement of the driver's safety for designing roads. In addition, after collecting and analyzing the data for the road sections which have various geometrical structures by expanding this experiment it is considered that there should be developed the models which considers 3-D solid geometry.