• 제목/요약/키워드: 2-Phase

검색결과 23,962건 처리시간 0.058초

2상 유도전동기 구동을 위한 2상 인버터 토폴로지의 비교 분석 (The Comparative Analysis of 2-Phase Inverter Topologies for 2-Phase Induction Motor)

  • 김동기;윤덕용
    • 전기학회논문지
    • /
    • 제65권6호
    • /
    • pp.1013-1018
    • /
    • 2016
  • In this paper, three kinds of the inverter topologies for the variable speed drive of 2-phase induction motor are compared and analyzed. The 2-phase inverters are classified into 2-leg, 3-leg, and 4-leg types depending on the number of power switching devices. And they use the output voltage vectors of the different forms according to the inverter topologies. Based on the comparative analyzed results, the effective values of output voltage have been defined by the linear modulation range. Therefore, the motor design guideline is proposed in order to decide a rated voltage of 2-phase induction motor according to the inverter topologies. Also, the computer simulations are carried out to verify the output voltage and current characteristics of each inverter topology.

$WS_2$ 고체 윤활제의 합성 (Synthesis of $WS_2$ Solid Lubricant)

  • 신동우;윤대현;황영주;김성진;김인섭
    • Tribology and Lubricants
    • /
    • 제13권4호
    • /
    • pp.60-65
    • /
    • 1997
  • The tungsten disulfide $(WS_2)$ solid lubricant was synthesized by two different reaction processes, i.e., the reaction between $CS_2$ gas phase and solid $WO_3$powder, and the vapour phase transport method of tungsten and sulfur in a high vacuum. The chemical and physical characteristics of synthesized $WS_2$powder were analyzed in terms of the average particle size, morphology, crystalline phase etc. in comparison with those of commercial $WS_2$powder. The solid $WO_3$ powder with the average size of 0.2 ${\mu}{\textrm}{m}$ was reacted with $CS_2$gas flowed with$N_2$or 96%$N_2{\times}4%H_2$forming gas for 36 h and 24 h at 90$0^{\circ}C$ respectively. $WS_2$ crystalline phase was then formed through the intermediate phase of .$W_{20}O_{58}$ In the case of vapour phase transport method, the 3.5 wt% iodine was added as a vapour transport reagent into the composition of tungsten and sulfur powders maintaining a constant molar ratio of W:S=1:2.2. The mixture was then heat treated at 85$0^{\circ}C$ for 2 weeks in vacuum. The reaction product obtained showed the average size of 12 ${\mu}{\textrm}{m}$ and the hexagonal plate shape of typical solid lubricant with 2H-$WS_2$crystalline phase.

Measurement of a Mirror Surface Topography Using 2-frame Phase-shifting Digital Interferometry

  • Jeon, Seok-Hee;Gil, Sang-Keun
    • Journal of the Optical Society of Korea
    • /
    • 제13권2호
    • /
    • pp.245-250
    • /
    • 2009
  • We propose a digital holographic interference analysis method based on a 2-frame phase-shifting technique for measuring an optical mirror surface. The technique using 2-frame phase-shifting digital interferometry is more efficient than multi-frame phase-shifting techniques because the 2-frame method has the advantage of a reduced number of interferograms, and then takes less time to acquire the wanted topography information from interferograms. In this measurement system, 2-frame phase-shifting digital interferograms are acquired by moving the reference flat mirror surface, which is attached to a piezoelectric transducer, with phase step of 0 or $\pi$/2 in the reference beam path. The measurements are recorded on a CCD detector. The optical interferometry is designed on the basis of polarization characteristics of a polarizing beam splitter. Therefore the noise from outside turbulence can be decreased. The proposed 2-frame algorithm uses the relative phase difference of the neighbor pixels. The experiment has been carried out on an optical mirror which flatness is less than $\lambda$/4. The measurement of the optical mirror surface topography using 2-frame phase-shifting interferometry shows that the peak-to-peak value is calculated to be about $0.1779{\mu}m$, the root-mean-square value is about $0.034{\mu}m$. Thus, the proposed method is expected to be used in nondestructive testing of optical components.

$PbNb_2{O_6}$ 세라믹스에서 미세구조에 미치는 첨가제의 영향 (Effect of additives on the microstructure of $PbNb_2{O_6}$ ceramics)

  • 김영상;안형식;오영우
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제7권5호
    • /
    • pp.417-424
    • /
    • 1994
  • PbNb$_{2}$O$_{6}$ piezoelectric ceramics have good properties, but the applications of them have been limited due to the problems of microstructures. In the present study, effects of additives on the phase stability, microstructure, and electrical proper-ties of ferroetectric phase were investigated. La$_{2}$O$_{3}$, Nd$_{2}$O$_{3}$ and Sm$_{2}$O$_{3}$ were added with the amounts of 1, 3, 5 mol% respectively. The results showed that single orthorhombic(ferroelectric phase) phase compared with the mixed phase of pure PbNb2O6 was obtained. In the case of 5 mol% Nd$_{2}$O$_{3}$ addition, relative density of >95% and dense microstructure with -2.mu.m grain size were obtained.d.

  • PDF

황-요오드 열화학 수소체조 공정에서 2 액상 정체 특성 (2 Liquid Phase Purification Characteristics for Sulfur-Iodine Thermochemical Hydrogen Production)

  • 이광진;차광서;강영한;박주식;배기광;김영호
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2007년도 춘계학술대회
    • /
    • pp.69-72
    • /
    • 2007
  • The objective of this work was to study the properties of purification of two liquid phase for exclusion of impurities in each phase. The experiments for process variables were carried out in the temperature range($H_{2}SO_{4}$ phase: $413{\sim}513$ K, $HI_{x}$ phase: $353{\sim}453$ K) and in the $N_{2}$ flow rate range($H_{2}SO_{4}$, $HI_{x}$ phase: $50{\sim}200$ mL/min). As the results, it is appeared that the principles of $H_{2}SO_{4}$ phase purification was due to stripping, evaporation and reverse bunsen reaction and $HI_{x}$ phase purification was due to stripping and reverse bunsen reaction. In purification of $H_{2}SO_{4}$ phase, the concentration rate of $H_{2}SO_{4}$ phase was controled by temperature but the temperature had few effects on yield of $H_{2}SO_{4}$. In purification of $HI_{x}$ phase, we observed products of side reactions($H_{2}S$, S) over 433 K. The purity of $HI_{x}$ phase was increased with increasing $N_{2}$ flow rate because impurites were decreased with increasing conversion of reverse reaction.

  • PDF

SRM의 여자방식에 따른 운전특성 (Drive Characteristics of SRM According to Excitation Strategy)

  • 김태영;안진우
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제54권10호
    • /
    • pp.455-460
    • /
    • 2005
  • A simple construction and low cost, fault tolerant power electronic drive has made the switched reluctance drive a strong contender for many applications. But, switched reluctance drive does exhibit higher levels of vibration and acoustic noise than that of most competing drives. The main source of vibration in the switched reluctance drive is generated by rapid change of radial magnetic force when phase current is extinguished during commutation action. In this paper,2 excitation method is proposed and compared to reduce vibration and acoustic noise of the switched reluctance drive. The excitation strategies considered this research are 1-phase, 2-phase and hybrid excitation method. 1-phase method is a conventional and 2-phase method is excited 2 phases simultaneously. The hybrid excitation has 2-phase excitation by long dwell angle as well as conventional 1-phase excitation. The vibration and acoustic noise are compared and tested. Suggested 2-phase and hybrid strategies reduce acoustic noise because the scheme reduces abrupt change of excitation level by distributed and balanced excitation.

5-GHz Delay-Locked Loop Using Relative Comparison Quadrature Phase Detector

  • Wang, Sung-Ho;Kim, Jung-Tae;Hur, Chang-Wu
    • Journal of information and communication convergence engineering
    • /
    • 제2권2호
    • /
    • pp.102-105
    • /
    • 2004
  • A Quadrature phase detector for high-speed delay-locked loop is introduced. The proposed Quadrature phase detector is composed of two nor gates and it determines if the phase difference of two input clocks is 90 degrees or not. The delay locked loop circuit including the Quadrature phase detector is fabricated in a 0.18 um Standard CMOS process and it operates at 5 GHz frequency. The phase error of the delay-locked loop is maximum 2 degrees and the circuits are robust with voltage, temperature variations.

레그 션트저항을 이용한 2상 유도전동기의 상전류 복원 방법 (Phase Current Reconstruction Method of 2-Phase Induction Motor using Leg-Shunt Resistors)

  • 김동기;윤덕용
    • 전기학회논문지
    • /
    • 제64권8호
    • /
    • pp.1186-1192
    • /
    • 2015
  • This paper proposes an economical method that the phase currents can be measured and reconstructed by means of the leg-shunt resistors in the 3-leg 2-phase vector-controlled inverter for 2-phase induction motor. In general, the phase currents of 2-phase induction motor have been measured using two Hall current sensors. However, because Hall current sensors are expensive, economically disadvantageous to apply in low power applications. The proposed method is verified by computer simulations and experiments to show the good performance of the vector control.

Strategies to Induce Metastable T' Phase of Monolayer MoS2

  • 강성우
    • EDISON SW 활용 경진대회 논문집
    • /
    • 제6회(2017년)
    • /
    • pp.417-423
    • /
    • 2017
  • Monolayer $MoS_2$의 metastable phase인 T' phase가 stable한 H phase보다 안정해지는 조건을 모색하기 위해 substitutional doping을 했을 때와 strain을 걸어주었을 때의 에너지 차이를 DFT 방법으로 계산하였다. Doping을 했을 때와 strain이 있을 때 T' phase와 H phase의 에너지 차이가 감소함을 확인하였으나 H phase보다 T' phase가 안정해지는 조건을 찾지는 못하였다. 하지만 이 방법을 기존의 alkali adsorption 방법과 병행하여 기존 방법의 단점을 보완할 수 있을 것을 기대해 볼 수 있다. 또한 전자구조 분석 중 얻은 dopant의 주기와 족에 따른 경향성은 다른 TMD 물질의 phase engineering을 design할 때 universal한 design rule로서 응용할 수 있음을 기대해 볼 수 있다.

  • PDF

$Pb(Zn_{1/3}Nb_{2/3})O_3-Pb(Fe_{1/2}Nb_{1/2})O_3$계에서의 Perovskite상의 안정성 및 유전특성 (Stabilization of the Perovskite Phase and Dielectric Properties in the System $Pb(Zn_{1/3}Nb_{2/3})O_3-Pb(Fe_{1/2}Nb_{1/2})O_3$)

  • 김정욱;최성철;이응상
    • 한국세라믹학회지
    • /
    • 제32권3호
    • /
    • pp.295-304
    • /
    • 1995
  • Stabilization of the perovskite phase and sequence of reactions occuring during calcination were studied with solid solutions formed between Pb(Zn1/3Nb2/3)O3 and Pb(Fe1/2Nb1/2)O3. In the PZN-PFN composition of equal molar ratio, rhombohedral type pyrochlore phase (Pb2Nb2O7) and PbO-rich distorted cubic type pyrochlore phase (Pb3Nb2O8) were coexisted as intermediate phases at temperatures below 85$0^{\circ}C$, and these phases transformed to a stable cubic type pyrochlore phase, Pb3Nb4O13 solid solution and a perovskite solid solution at temperatures above 85$0^{\circ}C$. The major stable phase as increasing sintering temperatures was a perovskite phase in this binary system and prominent suppression of the pyrochlore phase was achieved by substituting Zn2+ with Fe3+ or by increasing sintering temperature. The composition containing 20mol% PZN possessed the best dielectric properties, and the dissipation factor was lower than 5% in all compositions.

  • PDF