• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.3
• /
• pp.18-27
• /
• 2002

In order to improve the accuracy of the solution near the boundary in an analysis of viscous flow around an arbitrary boundary which move and be deformed using an Eulerian concept, a level-set based grid deformation method is introduced to concentrate grid points near the boundary. This paper presents a new monitor function which can easily control the level of the concentration of grid points along the boundary. Computations for steady flow around a semi-circular cylinder mounted on the bottom of the flow domain were carried out to check the improvement of the solution using the adaptive grid system with an immersed boundary method. The present numerical results show a good agreement with the solutions obtained by a body fitted grid system and more accurate solutions than those computed with non-adaptive grid system. For the validation of mechanical usefulness of the present method, an expanded analysis of flow around multi-body fixed in the flow domain was carried out. Finally, the present moving adaptive grid method was applied to a two-dimensional bubble rise problem. The computed results show well adapted grid points around the boundary of the bubble at every time and a good agreement with the result calculated by fixed grid system.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.2
• /
• pp.137-144
• /
• 2015

In this paper, we present an inertial sensor-based gait analysis system to measure and analyze lower-limb movements. We developed an integral AHRS(Attitude Heading Reference System) using a combination of rate gyroscope, accelerometer and magnetometer sensor signals. Several AHRS modules mounted on segments of the patient's body provide the quaternions representing the patient segments's orientation in space. And a method is also proposed for calculating three-dimensional inter-segment joint angle which is an important bio-mechanical measure for a variety of applications related to rehabilitation. To evaluate the performance of our AHRS module, the Vicon motion capture system, which offers millimeter resolution of 3D spatial displacements and orientations, is used as a reference. The evaluation resulted in a RMSE(Root Mean Square Error) of 1.08 and 1.72 degree in yaw and pitch angle. In order to evaluate the performance of our the gait analysis system, we compared the joint angle for the hip, knee and ankle with those provided by Vicon system. The result shows that our system will provide an in-depth insight into the effectiveness, appropriate level of care, and feedback of the rehabilitation process by performing real-time limb or gait analysis during the post-stroke recovery.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.159-171
• /
• 2012

This study has developed a technology for river basin including the management of the data related with riverbed and the analysis of the riverbed maintenance based on the high-resolution imagery data and LiDAR (Light Detection and Raging) in order to enhance the utilization of river management by using RIMGIS(River Information Management GIS) and to acquire the advanced operation for river management. Using the detailed river topographical map specially designed in the form of LiDAR or high-resolution images, riverbed data and river bank channel information that are dynamically changed were informationized and established in the RIMGIS DB. At this stage, a monitoring techniques that is established in the river management system associated with RIMGIS and minimized the impact of riverbed maintenance (fluctuations) has been studied. In addition, functions and data structure of RIMGIS containing the information of geography and management of the river have been supplemented to make an improvement of the real-time management of the river. Furthermore, a technology that is capable of supplementing RIMGIS has been developed, making it feasible to maintain the river in use of structural method including an structural scheme of cross-section of the river by providing the information of riverbed and cross-section of the river. This is considered to solve an issue of insufficient data on accuracy and based on a lack of information of the river based on the two-dimensional lines, making it feasible to (steadily) improve the function of RIMGIS and to operate management tasks. Therefore, it is highly expected to enhance aforementioned technology of the river information management as a great foundation that maximizes the utilization of the river management to support RIMGIS for the development of national river management data.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.2
• /
• pp.79-88
• /
• 2004

Gaze detection is to locate the position on a monitor screen where a user is looking by computer vision. Gaze detection systems have numerous fields of application. They are applicable to the man-machine interface for helping the handicapped to use computers and the view control in three dimensional simulation programs. In our work, we implement it with a computer vision system setting a IR-LED based single camera. To detect the gaze position, we locate facial features, which is effectively performed with IR-LED based camera and SVM(Support Vector Machine). When a user gazes at a position of monitor, we can compute the 3D positions of those features based on 3D rotation and translation estimation and affine transform. Finally, the gaze position by the facial movements is computed from the normal vector of the plane determined by those computed 3D positions of features. In addition, we use a trained neural network to detect the gaze position by eye's movement. As experimental results, we can obtain the facial and eye gaze position on a monitor and the gaze position accuracy between the computed positions and the real ones is about 4.8 cm of RMS error.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.1025-1032
• /
• 2005

This paper presents experimental and analytical studies on long-term behavior of square CFT columns with diaphragm. In order to investigate the effect of the diaphragm on the long~term behavior, experiments for six specimens with two diaphragms and three different column length, and three-dimensional finite element analysis for each specimen have been performed. The finite element models considering the interface behavior between the steel tube and the inner concrete were verified from comparison of the test results with the analysis results. From the test and the analysis results, the following conclusions were obtained. The confinement effect created by the diaphragm does not depends on column length and influences only a part of the whole column that is from the end to the depth which is the same to the width of the column. The shortening of the column with diaphragm which covers more than a half of the cross sectional area of the inner concrete is the same as that of the column under a load applied on the steel tube and the entire section of the inner concrete.

• The korean journal of orthodontics
• /
• v.32 no.1 s.90
• /
• pp.43-49
• /
• 2002

When we deal with maxillary and mandibular anterior dental arches showing problems in occlusal relation and aesthetics caused by malformations of teeth and congenital missing, et al during the orthodontic treatment, we could not often decide the functional occlusion by only relying on the orthodontic treatment. If orthodontists can predict what kinds of treatments are needed for functional occlusion in maxillary and mandibular anterior dental arches, they can not only effectively treat patients but also facilitate the cooperation with other field during the treatment, Our previous research showed the correlation among intercanine width, segment depth and arch perimeter by using the Korean normal occlusion model. At this time, we produced the computer application program by taking advantage of this correlation. And then, we applied this program to setting up the treatment plans for 2 patients with the damaged maxillary and mandibular dentures. With the help of this program, we could not only easily acquire the information about the change of variables required by treatment plans but also intercanine width, segment depth and arch perimeter. Later, if we can the information about the relationship between the change of the angle of incisors depending on facial types and arch forms and, in addition, can acquire the appropriate intercanine width, we can have the ability to produce the 3 dimensional occlusogram for the anterior dental arch forms.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.3
• /
• pp.248-254
• /
• 2005

The purpose of this study was to investigate the distribution of stress within the regenerated bone surrounding the implant using three dimensional finite element stress analysis method. Using ANSYS software revision 6.0 (IronCAD LLC, USA), a program was written to generate a model simulating a cylindrical block section of the mandible 20 mm in height and 10 mm in diameter. The $5.0{\times}11.5-mm$ screw implant (3i, USA) was used for this study, and was assumed to be 100% osseointegrated. And it was restored with gold crown with resin filling at the central fossa area. The implant was surrounded by the regenerated type IV bone, with 4 mm in width and 7 mm apical to the platform of implant in length. And the regenerated bone was surrounded by type I, type II, and type III bone, respectively. The present study used a fine grid model incorporating elements between 250,820 and 352,494 and nodal points between 47,978 and 67,471. A load of 200N was applied at the 3 points on occlusal surfaces of the restoration, the central fossa, outside point of the central fossa with resin filling into screw hole, and the functional cusp, at a 0 degree angle to the vertical axis of the implant, respectively. The results were as follows: 1. The stress distribution in the regenerated bone-implant interface was highly dependent on both the density of the native bone surrounding the regenerated bone and the loading point. 2. A load of 200N at the buccal cusp produced 5-fold increase in the stress concentration at the neck of the implant and apex of regenerated bone irrespective of surrounding bone density compared to a load of 200N at the central fossa. 3. It was found that stress was more homogeneously distributed along the side of implant when the implant was surrounded by both regenerated bone and native type III bone. In summary, these data indicate that concentration of stress on the implant-regenerated bone interface depends on both the native bone quality surrounding the regenerated bone adjacent to implant and the load direction applied on the prosthesis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.1
• /
• pp.105-113
• /
• 2001

The purpose of this study is to compare effects of denture cleansers and disinfectants on the color. surface hardness, and surface roughness of reinforced acrylic resin using polyhedral oligosilsesquioxane molecules(POSS resin) to those of common resins. According to manufacturer's instructions, 45 specimens were made from three denture resins(Luciton 199, Paladent 20, POSS resin), and polished. Five denture cleansers(distilled water, glutaraldehyde, alkaline hypochlorites, chlorhexidine, alkaline peroxides) in combination with three denture resins were evaluated before and after immersion for 7 days. Color data in $L^*a^*b^*$ system were measured with a colorimeter. Surface hardness data were measured with a microhardness tester. Surface roughness data were measured with a 3-dimensional surface analyzer. Data were analyzed with two-way ANOVA, one-way ANOVA, and t-test. The results were as follows : 1. All resins(Luciton 199, Paladent 20, POSS resin) showed significant differences in color after immersion in hypochlorites(p<0.05). 2. POSS resin showed significant differences in color compared with Paladent 20 in all denture cleansers, but no statistically significant differences with Luciton 199(p<0.05). 3. Luciton 199 showed significant differences of surface hardness in chlorhexidine, Paladent 20 showed significant differences in glutaraldehyde and chlorhexidine. POSS resin showed a little change of surface in all denture cleanser, but no statistically significant differences(p<0.05). 4. Luciton 199 and Paladent 20 showed significant differences of surface roughness in hypochlorites and glutaraldehyde, and POSS resin showed no statistically significant differences in all denture cleansers(p<0.05).

• Journal of Periodontal and Implant Science
• /
• v.34 no.3
• /
• pp.543-549
• /
• 2004

Chitosan has been widely researched as bone substitution materials and membranes in orthopedic/periodontal applications. Chitosan nanofiber membrane was fabricated by chitosan nanofiber using electrospinning technique. The structure of the membrane is nonwoven, three-dimensional, porous, and nanoscale fiber-based matrix. The aim of this study was to evaluate the biocompatibility of chitosan nanofiber membrane and to evaluate its capacity of bone regeneration in rabbit calvarial defect. Ten mm diameter round cranial defects were made and covered by 2 kinds of membranes (Gore-Tex membrane, chitosan nanofiber membrane) in rabbits. Animals were sacrificed at 4 weeks after surgery. Decalcified specimens were prepared and observed by microscope. Chitosan nanofiber membrane maintained its shape and space at 4 weeks. No inflammatory cells were seen on the surface of the membrane. In calvarial defects, new bone bridges were formed at all defect areas and fused to original old bone. No distortion and resorption was observed in the grafted chitosan nanofiber membrane. However bone bridge formation and new bone formation at the center of the defect could not be seen in Gore-Tex membranes. It is concluded that the novel membrane made of chitosan nanofiber by electrospinning technique may be used as a possible tool for guided bone regeneration.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.216-222
• /
• 2013

For reducing greenhouse gases, many countries carried out a series of activities not only at home but abroad. Particularly, after the release of the Kyoto Protocol, either nation or companies' participation was intensified, due to endow to responsibility of emission limits. This study focused on reforestation CDM work in Goseong Gun based on clean development system. Obstacle factors of land eligibility could be distinguished to three periods: before December 31th 1989, present and future. The obstacle before December 31th 1989 was that land cover of study area hardly illustrated by Landsat image, due to the low resolution, which were confirmed by a document of Grassland Composition Permission instead. The problem of current land eligibility is that the area of trees presence are difficult to be determined as forest or not. The boundary of forest in strata was identified, using 3-Dimensional Cartography Machine and aerial photograph. Land eligibility would still have obstacle whether the study area with trees presence has potentiality to be forest in the future at situation in absence of reforestation project. This was resolved by prediction of tree growth using stem analysis during execution of the project at study area.