• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.187-187
• /
• 2009

Opening of fractures induced by shear dilation or normal deformation can be a significant source of fracture permeability change in fractured rock, which is important for the performance assessment of geological repositories for spent nuclear fuel. As the repository generates heat and later cools the fluid-carrying ability of the rocks becomes a dynamic variable during the lifespan of the repository. Heating causes expansion of the rock close to the repository and, at the same time, contraction close to the surface. During the cooling phase of the repository, the opposite takes place. Heating and cooling together with the, virgin stress can induce shear dilation of fractures and deformation zones and change the flow field around the repository. The objectives of this work are to examine the contribution of thermal stress to the shear slip of fracture in mid- and far-field around a KBS-3 type of repository and to investigate the effect of evolution of stress on the rock mass permeability. In the first part of this study, zones of fracture shear slip were examined by conducting a three-dimensional, thermo-mechanical analysis of a spent fuel repository model in the size of 2 km $\times$ 2 km $\times$ 800 m. Stress evolutions of importance for fracture shear slip are: (1) comparatively high horizontal compressive thermal stress at the repository level, (2) generation of vertical tensile thermal stress right above the repository, (3) horizontal tensile stress near the surface, which can induce tensile failure, and generation of shear stresses at the comers of the repository. In the second part of the study, fracture data from Forsmark, Sweden is used to establish fracture network models (DFN). Stress paths obtained from the thermo-mechanical analysis were used as boundary conditions in DFN-DEM (Discrete Element Method) analysis of six DFN models at the repository level. Increases of permeability up to a factor of four were observed during thermal loading history and shear dilation of fractures was not recovered after cooling of the repository. An understanding of the stress path and potential areas of slip induced shear dilation and related permeability changes during the lifetime of a repository for spent nuclear fuel is of utmost importance for analysing long-term safety. The result of this study will assist in identifying critical areas around a repository where fracture shear slip is likely to develop. The presentation also includes a brief introduction to the ongoing site investigation on two candidate sites for geological repository in Sweden.

• Korean Journal of Weed Science
• /
• v.15 no.1
• /
• pp.73-84
• /
• 1995

Four malformin A's produced by Aspergillus niger van Tiegh. were separated by HPLC equipped with $C_{18}$ reversed-phase column and subjected to structural determination. Amino acid analyses and mass spectra data of the compounds indicate that they structurally resemble the cyclic pentapeptide malformin $A_1$. Their structures were deduced by two dimensional NMR and MS/MS experiments as cyclo-D-Cys-D-Cys-L-Val-D-Leu-L-Ile for $A_1$, cyclo-D-Cys-D-Cys-L-Val-D-Leu-L-Val for $A_2$, cyclo-D-Cys-D-Cys-L-Val-D-Leu-L-Leu for $A_3$, and cyclo-D-Cys-D-Cys-L-Val-D-Ile-L-Val for $A_4$. Among the mal-formin A's, the structure of $A_3$ was identical to that of malformin C, which was produced by A. niger strain AN-1. All the malformin A's caused severe curvatures of corn(Zea mays L.) roots and the activities of the malformin A's with molecular weight 529 were greater than those with molecular weight 515. Malformin $A_1$ caused the corn root curvature by 83% at a concentration of $0.25{\mu}M$. In the mung bean(Phaseolus aureus Roxb.) hypercotyl segment test, however, the molecular weight of malformin A's was not a factor influencing the physiological activities. Malformin $A_1$ stimulated the growth of mung bean hypercotyles by 165% at a $0.1{\mu}M$ concentration.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.178-194
• /
• 2011

Due to the population growth of the old aged, Korea is also entering into an aging society. But a research on the pattern design to the old aged is much to be desired. The purpose of this research is to design skirt pattern fitted for each body type by categorizing the lower body type of the old aged woman. For the way of research, categorized the body type by using the female measuring size from the 65 years old to 99 years old which has been measured by the Korean body size research as an assay data, and base on this data, a suitable skirt pattern for each body type of the old aged woman was designed by practicing the exterior evaluation. The data analysis was done with the statistical treatment in SPSS 12.0, and the results are as follows. The lower body type of the old aged woman were divided into the type 1. The circumference article is the biggest compared to the height article regarding to the lower body type of the old aged woman. The type 2. The height article and the circumference and thickness articles are the poorest. The type 3. The height article is the biggest and the hip width and calf circumference are thicker than the waist width. The type 4. The height article is the lowest and the waist width is thicker instead the hip and leg are thinner. In type 1, The pattern was modified by increasing 1cm a length of the dart and raising up 1.2cm at the cross point between side line and waist line. In type 2, the basic pattern was used, and in type 3, using the outline of the basic pattern however, increased 1cm a length of the dart and modified the amounts of dart by handling the art in curve, and modified the waist line to be more three-dimensional curves by raising up 1 cm at the cross point between waist line and side line and falling down 0.5cm at the cross point between the back center line and the waist line. In type 4, modified the amounts of front and back dart to 1.25cm, and raised up 0.8cm at the cross point between side line and waist line, and modified the waist line and the side seam line in a gentle curve by reducing circumference of the skirt tail to 1cm from the side seam line.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.4
• /
• pp.287-296
• /
• 2005

To investigation protein expression pattern in rice leaves exposed to cold stress, the soluble proteins extracted from leaf tissue were fractionated with $15\%$ PEG and separated by two-dimensional polyacrylamide gel electrophoresis (2-DE). Differentially expressed proteins were identified by peptide mass fingerprinting using matrix assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS). Eight proteins up-regulated and 10 down-regulated were found in $15\%$ PEG supernatant fraction. In addition, 13 proteins up-regulated and 14 down-regulated were found in $15\%$ PEG pellet fraction. It was identified the differentially expressed proteins in $15\%$ PEG supernatant fraction as pimerase/dehydratase fructokinase, ribose-5-phosphate isomerase (Rpi), chaperonin 21 precursor, probable photosystem II oxygen-envolving complex (PS II OEC) protein 2 precursor and thioredoxin h-type (Trx-h) and those in $15\%$ PEG pellet fraction as OSINBb0059K02.15, hypothetical protein, putative mitogen-activated protein kinase kinase (MAPKK), beta 7 subunit of 205 proteasome, ribulose-1, 5-bisphosphate carboxylase/oxygenase (Rubisco) small subunit. These proteins are involved in metabolism, energy, protein synthesis, disease/defense and signal transduction-related proteins.

• Journal of Biosystems Engineering
• /
• v.42 no.2
• /
• pp.117-125
• /
• 2017

Purpose: Damage to pulse crops by wild birds is a serious problem. The damage is to such an extent that the rate of damage during the period between seeding and cotyledon stages reaches 54.6% on an average. In this study, a crop-position detection method was developed wherein infrared (IR) sensors were used to determine the cotyledon position under a vinyl mulch. Methods: IR sensors that helped measure the temperature were used to locate the cotyledons below the vinyl mulch. A single IR sensor module was installed at three locations of the crops (peanut, red lettuce, and crown daisy) in the cotyledon stage. The representative thermal response of a $16{\times}4$ pixel area was detected using this sensor in the case where the distance from the target was 25 cm. A spatial image was applied to the two-dimensional temperature distribution using a non-integral moving-average method. The collected data were first processed by taking the moving average via interpolation to determine the frame where the variance was the lowest for a resolution unit of 1.02 cm. Results: The temperature distribution was plotted corresponding to a distance of 10 cm between the crops. A clear leaf pattern of the crop was visually confirmed. However, the temperature distribution after the normalization was unclear. The image conversion and frequency-conversion graphs were obtained based on the moving average by averaging the points corresponding to a frequency of 40 Hz for 8 pixels. The most optimized resolutions at locations 1, 2, and 3 were found on 3.4, 4.1, and 5.6 Pixels, respectively. Conclusions: In this study, to solve the problem of damage caused by birds to crops in the cotyledon stage after seeding, the vinyl mulch is punched after seeding. The crops in the cotyledon stage could be accurately located using the proposed method. By conducting the experiments using the single IR sensor and a sliding mechanical device with the help of a non-integral interpolation method, the crops in the cotyledon stage could be precisely located.

• Journal of Life Science
• /
• v.14 no.2
• /
• pp.325-330
• /
• 2004

The RAD3 gene of Saccharomyces cerevisiae is required for excision repair and is essential for cell viability. RAD3 encoded protein possesses a single stranded DNA-dependent ATPase and DNA and DNA-RNA helicase activities. To examine the extent of conservation of structure and function of RAD3 during eukaryotic evolution, the RAD3 homolog gene was isolated by screening of genomic DNA library. The isolated gene was designated as HRD3 (Homologue of RAD3 gene). The over-expressed HRD3 protein was estimated to be a 75 kDa in size which is in good agreement with the estimated by the nucleotide sequence of the cloned gene. Two-dimensional gel electrophoresis showed that a number of other protein spots dramatically disappeared when the HRD3 protein was overexpressed. The overexpressed RAD3 protein showed a toxicity in E. coli host, suggesting that this protein may be involved in the inhibition of protein synthesis and/or degradation of host protein. To determine which part of HRD3 gene contributes to the toxicity in E. coli, various fusion plasmids containing a partial sequence of HRD3 and lac'Z gene were constructed. These results suggest that the C-terminal domain of HRD3 protein may be important for both toxic effect in E. coli and for its role in DNA repair in S. pombe.

• Transactions of the Korean hydrogen and new energy society
• /
• v.9 no.4
• /
• pp.169-176
• /
• 1998

An experimental study on effect of vapor-cooled heat stations in a 5.5 liter cryogenic vessel has been performed. The cryogenic vessel is made of stainless steel of thickness of 1mm and insulated by the combined insulation of vacuum, MLI(multi-layer insulation) and vapor-cooled radiation shield. Vapor-cooled heat stations are also constructed based on the 1-dimensional thermal analysis to reduce the heat inleak through a filling tube. Thermal analysis indicates that the vapor-cooled heat stations can substantially enhance the performance of vessel for cryogenic fluids with high $C_p/h_{fg}$ where $C_p$ the specific heat and $h_{fg}$ the heat of vaporization, such as $LH_2$ and LHe. The experimental results for $LN_2$ shows that the total heat inleak into inner vessel consists of 14% radiation and 86% conduction through the filling tube. Therefore, it is expected that the conduction heat in leak of the vessel for high $C_p/h_{fg}$ cryogenic fluids can be significantly reduced. powders. The amount of copper coating was 20wt%. In order to examine corrosion behavior of the electrodes, the corrosion current and the current density, in 6M KOH aqueous solution after removal of oxygen in the solution, were measured by potentiodynamic and cyclic voltamo methods. The results showed that Co in the alloy increased corrosion resistance of the electrode whereas Ni decreased the stability of the electrode during the charge-discharge cycles. The electrode used Si sealant as a binder showed a lower corrosion current density than the electrode used PTFE and the electrode used Cu-coated alloy powders showed the best corrosion resistance.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.10
• /
• pp.5-16
• /
• 2005

Geosynthetic-reinforced and pile-supported embankments have been increasingly used and researched around the world. The inclusion of one or multiple geosynthetic reinforcements over the pile is intended to enhance the efficiency of load transfer from soft ground to piles, to reduce total and differential settlement and increase global or local stability. In this paper, the reinforcement effectiveness and arching effect of the geogrid-reinforced and pile-supported embankments have been studied in terms of field model tests and numerical analysis with varying the space between piles and reinforcement. 2-dimensional numerical analysis has been conducted using the FLAC (Fast Lagrangian Analysis of Continua) program. And load transfer mechanisms between soil-piles-geogrid were investigated. The mechanisms of load transfer can be considered as a combination of embankment soil arching, tension geogrid, and stress concentration due to the stiffness difference between pile and soft ground. Based on the field model test and numerical analysis results, it was found that the geosynthetic reinforcement slightly interferes with soil arching, and helps reduce differential settlement of the soft ground. Also. at the D/b=3 (D: spacing of pile cap, b: diameter of pile), the total settlement is reduced by about $40\%$ compared to that without reinforcement. For $D/b{\ge}6$, the effectiveness of geogrid reinforcement in reducing settlement is negligible.

• Journal of Periodontal and Implant Science
• /
• v.41 no.4
• /
• pp.176-184
• /
• 2011

Purpose: The final goal of regenerative periodontal therapy is to restore the structure and function of the periodontium destroyed or lost due to periodontitis. However, the role of periosteum in periodontal regeneration was relatively neglected while bone repair in the skeleton occurs as a result of a significant contribution from the periosteum. The aim of this study is to understand the histological characteristics of periosteum and compare the native periosteum with the repaired periosteum after elevating flap or after surgical intervention with flap elevation. Methods: Buccal and lingual mucoperiosteal flaps were reflected to surgically create critical-size, "box-type" (4 mm width, 5 mm depth), one-wall, intrabony defects at the distal aspect of the 2nd and the mesial aspect of the 4th mandibular premolars in the right and left jaw quadrants. Animals were sacrificed after 24 weeks. Results: The results from this study are as follows: 1) thickness of periosteum showed difference as follows (P<0.05): control group ($0.45{\pm}0.22$ mm)> flap-elevation group ($0.36{\pm}0.07$ mm)> defect formation group ($0.26{\pm}0.03$ mm), 2) thickness of gingival tissue showed difference as follows (P<0.05): defect formation group ($3.15{\pm}0.40$ mm)> flap-elevation group ($2.02{\pm}0.25$ mm) > control group ($1.88{\pm}0.27$ mm), 3) higher cellular activity was observed in defect formation group and flap-elevation groups than control group, 4) the number of blood vessles was higher in defect formation group than control group. Conclusions: In conclusion, prolonged operation with increased surgical trauma seems to decrease the thickness of repaired periosteum and increase the thickness of gingiva. More blood vessles and high cellular activity were observed in defect formation group.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.625-633
• /
• 2020

this study, an expert AHP questionnaire analysis of public and private groups was conducted to take into consideration the requirements for realistic disaster services. Considered are public areas that manage disasters like fires and earthquakes that can be a major threat to national safety, as well as private areas that mainly develop disaster-related technologies. In the questionnaire, the public respondents valued accurate disaster situation information (ranked 4th and 6th) for citizens (1st), managers (3rd), and related organizations (2nd); the private sector highly valued the importance of three-dimensional (3D) control (ranked 1st, 3rd, and 5th) using future technologies. This study suggests the realization of a disaster-response service that meets the needs of public safety and technological innovation based on a 3D safety state information platform. We anticipate that this study will provide useful data for applying technology and for establishing detailed scenarios during the test bed and commercialization phases. We also expect that further studies will be conducted, such as the practical application and operation of realistic disaster response services, on the financial resources for the proliferation of local governments, and on policy support measures.