• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.81-84
• /
• 2001

Some trials to simulate the spinning process by which V-belt pulley is usually being manufactured are done in this study. 2D finite element analysis (FEA) for the whole process to produce a mono-typed pulley including preforming, 1st spinning, axial compression and 2nd spinning processes is carried out using the commercial code $DEFORM2D^{TM}$. The sectional shape after each process is compared with that of real product. The deformed shape obtained from the FEA, on the whole, coincides with the experimental result well, but the thickness around the bottom of the V-groove is somewhat different each other.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1089-1093
• /
• 2003

The moving least square (MLS) basis is implemented for the real-space band-structure calculation of 2D photonic crystals. The value-periodic MLS shape function is thus used in order to represent the periodicity of crystal lattice. Any periodic function can properly be reproduced using this shape function. Matrix eigenequations, derived from the macroscopic Maxwell equations, are then solved to obtain photonic band structures. Through numerical examples of several lattice structures, the MLS-based method is proved to be a promising scheme for predicting band gaps of photonic crystals.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1009-1014
• /
• 2001

A numerical investigation on nonlinear oscillations of gas in an axisymmetric resonant tube is presented. When a tube is oscillated at a resonant frequency, acoustic variables such as density, velocity, and pressure undergo very large perturbation, often described as nonlinear oscillation. In order to analyze these phenomena, axisymmetric 2-D nonlinear governing equations have been derived and solved numerically. Numerical simulations were accomplished for cylindrical, conical, and 1/2 cosine-shape tubes, which have same volume and length. For conical and 1/2 cosine-shape tubes, very large variation of pressures can be induced without shock formation except the cylindrical tube. In addition, the results well agree to those of 1-D simple model analysis.

• 한국전산유체공학회지
• /
• 제14권1호
• /
• pp.45-52
• /
• 2009

Ice accretion may occur when the sold surface passes through the clouds containing supercooled water droplets. In the case of aircraft, it can result in serious performance degradation and safety hazard. In this study, numerical analysis code has been developed to predict the rime ice shapes on a 2-D airfoil and the computation results are validated against experimental data of NASA and other computation results of well-known ice prediction code, LEWICE. In addition, the effects of various numerical parameters on the ice shape have been systematically investigated.

• 한국안전학회지
• /
• 제11권2호
• /
• pp.79-88
• /
• 1996

A hypothetical accident in the containment vessel of liquid metal reactor could cause a pressure, temperature rise, and a strong aerosol release. The computer codes relating to the modelization of these accident make it necessary to use various input parameter, among which is the dynamic shape factor of aerosols produced. Combustion experiments of sodium spray fire carried out in a closed vessel, which was vertical cylinder made of 1.2m in diameter and 1.8m hight with a volume of 1.7$m^3$. The results of theoretical analysis presented here was compared to data obtained from experiments. The experimental results were summarized as follows. 1) The aerodynamic diameter and geometric diameter of aerosols are decreasing with increasing of injection pressure and injection temperature of sodium 2) The dynamic shape factor of aerosol is proportional to the aerodynamic diameter for a given particle. 3) The correspondence between the aerodynamic diameter and geometric diameter can be as $D_{ae}=0.70 D_{ge}$. 4) Peak pressure rose with increase in pressure and temperature of injection sodium, being more sensitive to the injection pressure than the injection temperature.

• 천문학회보
• /
• 제46권2호
• /
• pp.59.2-59.2
• /
• 2021

On March 6 2021, Apophis made a close approach to the Earth with a minimum distance of 0.11 AU when the apparent magnitude reached up to V~16. This was the most favorable condition to observe this asteroid until its 2029 encounter. The observations during this apparition were extremely important to determine major physical properties, such as size, rotational state, 3D shape model, surface mineral properties. So, we organized the observation campaign during the 2021 apparition. The main goals of our campaign are to refine the spin state and 3D shape model and check the surface composition variations. The campaign involved dozens of countries and included ground-based photometry and spectroscopy, and spacecraft observations. Our timely observation campaign will provide essential data in planning the operation scenario for the space mission. In this presentation, we will report the preliminary result of the Apophis observation campaign during the 2021 apparition.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.288-291
• /
• 2006

Piercing or blanking process is widely used to manufacture most of lead frame parts, but it is difficult to analyze the real process by the actual shape through progressive dies. In this paper several stages in progressive punching are modeled by 2D and 3D configurations using $DEFORM^{TM}$ 2D/ 3D code. During the progressive stage some state variables and deformed configurations are analyzed in each model. There are three stages in the process, the deformations at each stage are cumulative. The advantages and disadvantages of these two type modeling are discussed and analyzed. The experiments are performed as a working material copper alloy through manufactured die. Computed results in load by two types are compared to experiments.

• International Journal of Ocean System Engineering
• /
• 제3권4호
• /
• pp.225-230
• /
• 2013

This paper introduces the experimental results of sloshing model tests carried out at Seoul National University. Two 1/50-scale tanks, i.e., 2D and 3D models with the same shape, were manufactured for the comparative study. Particular interest was taken in the differences in impact pressures between the 2D and 3D models. Regular motion tests were conducted for different filling depths. For each filling depth, 500 cycles of regular excitation were imposed at each frequency. To observe the characteristics and severity of sloshing from the acquired pressure data, statistical analyses were performed, not only for the peak pressure, but also for the area-concept indices, which represented the amount of impulse.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.183-186
• /
• 2003

A vision sensor should be calibrated prior to infer a Euclidian shape reconstruction. A point to point calibration. also referred to as a hard calibration, estimates calibration parameters by means of a set of 3D to 2D point pairs. We proposed a new method for determining a set of 3D to 2D pairs for the structured light hard calibration. It is simply determined based on epipolar geometry between camera image plane and projector plane, and a projector calibrating grid pattern. The projector calibration is divided two stages; world 3D data acquisition Stage and corresponding 2D data acquisition stage. After 3D data points are derived using cross ratio, corresponding 2D point in the projector plane can be determined by the fundamental matrix and horizontal grid ID of a projector calibrating pattern. Euclidian reconstruction can be achieved by linear triangulation. and experimental results from simulation are presented.

• 한국멀티미디어학회논문지
• /
• 제15권1호
• /
• pp.63-70
• /
• 2012

본 논문에서는 ASM(active shape model)의 성능을 향상시키기 위하여 형태(shape) 정렬 방법과 이차원 특징벡터 추출 방법을 제안한다. 기존 알고리즘은 입력 이미지의 중간 검출 랜드마크와 기준 모델 간의 정렬을 위하여 스케일, 회전, 이동 정보 만을 이용한다. 하지만 위의 평면적인 정보 만으로는 얼굴과 같이 입체적인 물체의 포즈 변화나 삼차원적인 움직임 등을 제대로 반영할 수 없다. 이를 개선하기 위하여 자유도를 증가시킴으로써 형태의 복잡한 변화에 보다 강인한 형태정렬 방식을 제안한다. 또한, 멀티스케일로 이차원 프로파일을 구하고 이들의 공분산 행렬을 trimming하여 검출속도를 향상시키는 방법을 제안한다. 비교적 다양한 포즈로 촬영한 얼굴 이미지 데이터베이스를 이용하여 제안 알고리즘의 형태 검출 성능을 확인한다.