• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.596-598
• /
• 2001

This paper presents an analysis of the characteristics in switched reluctance motor (SRM). 2D finite element method (FEM) considering the iron saturation and the actual switching circuit of the SRM drive is applied for the dynamic analysis. The influence of the rotor shape on the radial force and torque ripple is investigated and the optimal shape of rotor pole is proposed to enhance the torque. The radial force characteristics acting on the surface of teeth is investigated by using the Maxwell's magnetic stress tensor method.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.796-802
• /
• 2005

Numerical analysis has been conducted for improving air flow characteristics in the exhaust aftertreatment system of diesel-fueled passenger cars by changing axial length and cone shape of a DPF diffuser. The results of air velocity and static pressure distributions along with air flow uniformity results suggest that a diffuser shape with 2D or 3D function type is better for air flow patterns in front of a DPF.

• 한국통신학회논문지
• /
• 제21권2호
• /
• pp.301-312
• /
• 1996

A new approach is presented for recovering the 3-D shape from shading image. Photometric Stereo Method (PSM) is generally based on the direct illumination. In this paper, the reflectance function is derived by introduceing the indirect diffuse illumination in PSM and then applied to hybrid reflectance model which consists fo two components; the Lambertian reflectance and the speclar reflectance. Under the hybrid reflectance model and the indirect diffuse illumination circumstances, the 3-D shape of object can be recovered from the suface normal vector extracted from the surface roughness, the surface reflectance ratio, and the intensity value of a pixel. This method is rapid because of using the reference table and simplifies the restriction condition about the reflectance function existing in prior studies. The recovery efficiency in our method is better than that in prior studies. Also, this method is applied to various types of surfaces by defining general reflectance function.

• 한국안전학회지
• /
• 제11권1호
• /
• pp.39-45
• /
• 1996

In this study, clustering of black BADUK stones' image were performed to recognize the individual stone from its closely spaced and partially occluded Image. And the clustering perfomance was compared between the classical methods and fuzzy C-means method. As a result, 2 BADUK stones' image was segmented precisely in every methods, but more than 3 stones the segmentation was depended on its shape. Fuzzy C-means method could be segmented correctly to 4 stones regardless of its shape, and It could be applied to the unknown number of clusters.

• 한국음향학회지
• /
• 제18권1호
• /
• pp.10-15
• /
• 1999

본 연구는 35° Y-X Quartz 기판에 낮은 형상 요소를 갖는 Code Division Multiple Access(CDMA)방식 기지국용 Intermediate Frequency (IF)단 통과대역 필터를 설계하고 제작하는 방법에 대해 연구하였다. 이 기판 위에 임펄스 모델링을 이용하여 낮은 형상 요소를 갖는 표면 탄성파 필터를 제작하기 위해 입력단에는 Apodization weighted형의 빗살무늬 변환기, 출력단에는 Withdrawal weighted형의 빗살무늬 변환기로 구성하였다. 그리고 입출력 IDT의 개수는 리플의 영향을 최소화하기 위해 Kaiser-Bessel 창함수를 이용하였으며, 각각 2200쌍과 1000쌍으로 하였다. IDT 전극의 폭은 3.6㎛, 간격은 3.5㎛였으며 두께는 파장과의 비를 고려해 6000Å으로 할 때 최적의 결과를 얻을 수 있었으며, 구경은 임피던스 정합을 위해 2mm로 하였다. 제작된 SAW필터는 중심 주파수 115.2MHz, 통과대역 폭은 1.27MHz이상, 형상 요소는 1.3이하, 삽입손실 -l5dB 및 저지대역 -45dB이하인 특성을 얻을 수 있었다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.776-783
• /
• 2009

본 논문은 스키니 스머지 툴을 이용한 2D 가상 컬러 헤어스타일러에 관한 것이다. 스머지 툴(smudge tool)은 어도비 포토샵에 내장된 대중적인 그래픽 툴로서 물감을 화폭 상에 문질러서 흐려지게 할 시에 이용된다. 그 효과는 지두화법과 매우 유사하다. 스머지 툴은 스머지 아이콘을 클릭한 다음에 화폭 위를 클릭한 후, 마우스 버튼을 누른 상태에서 번짐 효과를 주고 싶은 방향으로 끌어당김으로써 그 기능을 이용할 수 있다. 그러나 기존의 스머지 툴은 마스터 직경 내의 모든 화소값을 블렌딩시켜 목표 영상을 생성함에 따라 원하지 않는 부위의 화소마저도 변형시키는 단점이 있다. 이러한 단점을 해결하고자 본 논문에서는 마스터 형상 분할에 기반한 스키니 스머지 툴(skinny smudge tool)을 제안하고자 한다. 제안된 스키니 스머지 툴은 컬러 영상 분할에 통해 윤곽 형상에 밀착된 마스터 형상을 추출함에 따라 배경에 관계없이 변형하고 싶은 부분에만 번짐 효과를 적용시킬 수 있는 장점이 있다.

• Computers and Concrete
• /
• 제19권2호
• /
• pp.211-216
• /
• 2017

Crack on concrete surface allows more rapid penetration of chlorides. Crack width and depth are dominant parameters for chloride behavior, however their effects on chloride penetration are difficult to quantify. In the present work, the previous anisotropic (1-D) model on chloride diffusion in concrete with single crack is improved considering crack shape and roughness. In the previous model, parallel-piped shape was adopted for crack shape in steady-state condition. The previous model with single crack is improved considering wedge shape of crack profile and roughness. For verifying the proposed model, concrete samples for nuclear power plant are prepared and various crack widths are induced 0.0 to 1.2 mm. The chloride diffusion coefficients in steady-state condition are evaluated and compared with simulation results. The proposed model which can handle crack shape and roughness factor is evaluated to decrease chloride diffusion and can provide more reasonable results due to reduced area of crack profile. The roughness effect on diffusion is evaluated to be 10-20% of reduction in chloride diffusion.

• 한국자기공명학회논문지
• /
• 제11권1호
• /
• pp.1-9
• /
• 2007

An unequal site exchanging system induced by restricted rotation of 9-methyl group in 1,8-dichloro-9-triptycene has been studied by spin-lattice relaxation and 2D-EXSY experiments. The exchange rate obtained from relaxation studies is very well coincident to the result of line shape analysis, and the difference of the relaxation times ($T_1$) in two different sites has an important role to analyze 2D-EXSY experimental data.

• 한국전산유체공학회지
• /
• 제9권1호
• /
• pp.34-40
• /
• 2004

Recently with growth in the capability of super computers and Parallel computers, shape design optimization is becoming easible for real problems. Also, Computational Fluid Dynamics(CFD) techniques have been improved for higher reliability and higher accuracy. In the shape design optimization, analysis solvers and optimization schemes are essential. In this work, the Roe's 2nd-order Upwind TVD scheme and DADI time march with multigrid were used for the flow solution with the Euler equation and FDM(Finite Differenciation Method), GA(Genetic Algorithm) and Kriging were used for the design optimization. Kriging were applied to 2-D airfoil design optimization and compared with FDM and GA's results. When Kriging is applied to the nonlinear problems, satisfactory results were obtained. From the result design optimization by Kriging method appeared as good as other methods.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.68-73
• /
• 1999

Generally, most of machining processes are done according to the dimention of the draft made by CAD. However, there are many cases that a sample is given without the draft because of the simplicity of the shape in the machining of 2D objects. To cut the same shape as the given sample, this paper proposes the method to extract the geometric information about a large sample using the robot vision and to draw the demensional draft for the machining. Because the resolution of one frame in the vision system is too low, it is necessary to set up a camera according to the desired resolution and to capture the image moving along the contour. And the overall outline can be compounded of the sequentially captured images. In the experiment, we compared the product after the cutting with the original sample and found that the size of two objects was coincided within the allowed error bound.