• 제목/요약/키워드: 2-D shape

검색결과 2,492건 처리시간 0.036초

태양에너지 연구 시험센타 설계 및 효율에 관한 연구 (Design & Performance of the Solar Energy Research & Test Center)

  • 오정무;이종호;최병완;조일식
    • 태양에너지
    • /
    • 제2권2호
    • /
    • pp.29-36
    • /
    • 1982
  • The Solar Energy R&D Department of KIER under the auspice of the Korean government is pushing hard on the development of the passive solar technology with high priority for the expeditious widespread use of solar energy in Korea, since the past few years of experiences told us that the active solar technology is not yet ready for massive commercialization in Korea. KIER has completed the construction of the Solar Energy Research & Test Center in Seoul, which houses the major facilities for its all solar test programs. The Center was designed as a passive solar building with great emphasis on the energy conserving ideas. The Center is not only the largest passive building in Korea, but also the exhibit center for the effective demonstration of the passive heating and cooling technology to the Korean public. The Center was designed to satisfy the requirements based on the technical and economical criteria set by the KIER. Careful considerations, therefore, were given in depth in the following areas to meet the requirements. 1) Passive Heating Concepts The Center employed the combination of direct and indirect gain system. The shape of the Center is Balcomb House style, and it included a large built-in sunspace in front. A partition, consists of transparent and translucent glazings, separates the sunspace and the living space. Since most activities in the Center occur during the day time, direct utilization of the solar energy by the living spaces was emphasized with the limited energy storage capacity. 2) Passive Cooling Concepts(for Summer) Natural ventilation concept was utilized throughout the building. In the direct gain portion of the system, the front glazing can be openable during the cooling season. Natural convection scheme was also applied to the front sunspace for the Summer cooling. Reflective surfaces and curtains were utilized wherever needed. 3) Auxiliary Heat ing and Cooling System As an auxiliary cooling system, mechanical means(forced convection system) were adopted. Therefore forced air heating system was also used to match the duct work requirements of the auxiliary cool ing system. 4) Effect ive Insulation & Others These included the double glazed windows, the double entry doors, the night glazing insulation, the front glazing-frame insulation as well as the building skin insulation. All locally available construction materials were used, and natural lightings were provided as much as possible. The expected annual energy savings (compared to the non-insulated conventional building)of the Center was estimated to be about 80%, which accounts for both the energy conservation and the solar energy source. The Center is being instumented for the actual performance tests. The experimental results of the simplified tests are discussed in this paper.

  • PDF

The Effect of Barrel Vibration Intensity to the Plating Thickness Distribution

  • Lee, Jun-Ho;Roselle D. Llido
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 1999년도 추계학술발표회 초록집
    • /
    • pp.15-15
    • /
    • 1999
  • In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

  • PDF

경로 제어가 가능한 가상생명체를 위한 2단계 진화 알고리즘 (Two-Stage Evolutionary Algorithm for Path-Controllable Virtual Creatures)

  • 심윤식;김창헌
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제32권11_12호
    • /
    • pp.682-691
    • /
    • 2005
  • 본 논문은 사용자의 제어가 가능한 3차원 물리 기반 가상생명체를 생성하는 2단계 진화 시스템을 제안한다. 기존의 방법은 가상생명체의 형상과 기동, 그리고 목표지점추적(target-following)과 같은 상위 레벨의 행위를 한꺼번에 하나의 진화 시스템으로 생성해냄으로 인하여 진화 단계에서의 사용자의 개입을 허용하지 않았다. 본 논문은 하나로 묶여있던 시스템을 다루기 용이한 두 개의 서브시스템으로 분리함으로써 사용자의 개입을 허용한다. 첫 번째 단계로 가상생명체의 몸체와 직진 기동을 위한 하위 레벨 모터 컨트롤러가 진화 알고리즘(evolutionary algorithm)으로 동시에 생성된다. 두 번째 단계에는 생성된 기본 생명체 위에 주어진 경로를 따라가기 위한 상위 레벨 컨트롤러가 인공 신경망을 사용하여 탑재된다. 경로제어(path-following)를 위한 신경망의 연결 가중치는 유전자 알고리즘(genetic algorithm)을 사용하여 최적화되며 한번 진화된 신경망 컨트롤러는 어떠한 임의의 경로도 잘 따라감을 보여준다. 이로써 사용자는 모든 진화과정이 끝나지 않고도 중간단계에서 기호에 맞는 생명체를 골라내거나 버릴 수 있으며, 동일한 기본 생명체 위에 또 다른 형태의 상위레벨 행위를 생성하는 것도 가능해진다. 본 논문은 이러한 2단계 알고리즘과 함께 직진기동을 위한 새로운 분절 삼각 함수(Piecewise sinusoidal) 컨트롤러를 제안하고 마개 실린더(capped-cylinder)를 기본 요소로 하는 가상생명체에 대한 효율적인 실시간 수중역학 모델링 기법도 함께 소개한다.

바지락 (Ruditapes philippinarum)의 번식량 측정 및 유생발달에 관한 연구 (Quantification of Reproductive Effort and Microscopic Observation on the Larval Development of Manila clam Ruditapes philippinarum (Adams and Reeve, 1850))

  • 이희중;강현실;박경일;;최광식
    • 한국패류학회지
    • /
    • 제28권2호
    • /
    • pp.145-156
    • /
    • 2012
  • 이 연구에서는 바지락 (Ruditapes philippinarum) 의 번식량 및 유생발생을 관찰하였으며, 이를 위하여 수정란 및 유생을 21일 간 실내사육수조를 이용하여 배양하였다. 바지락은 2011년 8월 제주시 김녕에서 채집 실험 수조로 옮겨졌으며, 다음날 자연적인 방란 방정이 관측되었다. 바지락 수정란은 19시간의 배 발생과정을 거쳐 21일 후 포복피면자유생(pediveliger) 으로 발달하였다. 조직학적 방법을 이용하여 바지락의 생식소를 관찰한 결과, 방란, 방정 전 모든 개체는 성적으로 완숙한 상태였고, 산란 후 모든 개체에서 부분산란이 관찰되었다. 효소면역학적 방법 (ELISA) 에 의한 번식량 측정 결과, 암컷 바지락의 생식소 지수는 (GSI) 산란 전 28.6%에서 산란 후 17.3%로 11.3% 감소하였으며, 추정된 포란수는 6,998,658 eggs였다. 이 연구서 광학현미경 및 전자현미경을 이용하여 관찰된 바지락 유생 발달 및 번식량은 향후 바지락 인공종묘 산업 및 바지락 자원관리에 있어 중요한 자료로 활용될 것으로 사료된다.

가금티푸스 저항성 계통 선발을 위한 산란종계의 경제능력 검정에 관한 연구 (Examination of Economic Performance of Egg Type Breeder Lines for the Selection of Fowl-Typhoid Resistant Breed)

  • 한성욱;이봉덕;전익수
    • 농업과학연구
    • /
    • 제28권2호
    • /
    • pp.70-77
    • /
    • 2001
  • 가금티푸스에 저항성을 가진 합성종을 생산하기 위하여 갈색계통인 이사(ISA), 하이라인(Hyline), 로만(Lohman) 3 계통과, 백색계통인 이사(ISA) 및 로만(Lohman) 2 계통의 종계(PS)에 대한 생존율, 사료섭취량, 체중, 성성숙일령, 시산 난중, 및 난질을 조사하였다. 성계 암컷 생존율(34주~66주)은 갈색계통과 백색계통에서 각각 93.3%, 93.5%로 차이가 없었고, 수컷 생존율에도 차이가 없었다(P>0.05). 수당사료 섭취량(21~66주)은 암컷에서 갈색계통과 백색계통이 각각 113.9g과 114.3g으로 비슷한 수준이었으며, 수컷에서도 차이가 없었다. 성계 체중은 암 수 공히 갈색 산란종계 3계통 및 백색 산란종계 2계통간에 유의한 차이가 없었다. 갈색과 백색 산란종계의 체중을 비교해 보면, 갈색 산란종계가 암컷과 수컷 모두 백색 산란종계 에 비하여 무거웠으나, 반복간에 변이가 워낙 커서 유의성은 검출되지 않았다. 성성숙일령은 갈색계통과 백색계통이 각각 147.8일과 140.5일로 갈색계통이 7일정도 늦었다(P<0.05). 산란율은 23-66주에서 갈색과 백색계통이 각각 75.0% 및 81.4%로 백색계통이 약 6% 높았다(P<0.05). 39주령에 갈색란과 백색란의 난질 성적을 비교해보면 Haugh Unit, 난형계수, 난황색, 난중에 있어서는 유의한 차이가 검출되지 않았다. 그러나 난각두께는 갈색 산란계통의 계란이 더 두꺼웠고, 난각강도도 유의하게 강한 것으로 나타났다.

  • PDF

오렌지색 절화용 스프레이 장미 "모닝스타" 육성 (Breeding of Spray Rose Cultivar, "Morning Star" with Orange Color)

  • 김원희;김성태;허건양;이은경;박필만;김영진
    • 한국육종학회지
    • /
    • 제41권3호
    • /
    • pp.284-287
    • /
    • 2009
  • 2002년도에 오렌지색의 스프레이 'Macarena' 품종을 모본으로 다화성인 황색의 스프레이 'Lion Sunshine' 품종을 부본으로 인공교배 하였다. 2003~2004년에 파종을 실시하여 517개체의 실생을 획득하여 이들을 대상으로 2005~2007년까지 3차에 거쳐 특성검정을 실시한 후 최종 특성검정 단계에서 기호도 조사를 실시한 결과 최종 선발된 '원교 D1-501' 을 "모닝스타" 로 명명하였다. "모닝스타"의 화색은 오렌지색으로 RHS 칼라챠트번호 29B이며 화형은 반고심형의 화형이며 향기는 '써니레이디'에 비하여 거의 없었다. 꽃잎수는 48.5개로서 '써니레이디' 의 52.9개보다 적었으며 화폭은 5.5 cm로 '써니레이디' 보다 약간 작았다. 평방미터당 년간 절화수량은 170.2본으로 '써니레이디'보다 많았으며 절화장은 57.4 cm 절화경경은 5.9 mm로 '써니레이디'보다 길이는 짧았지만 굵기는 굵어서 전반적으로 강건한 절화형태를 보였다. 소화수는 '써니레이디'의 3.9개보다 많은 4.9개를 보여 우수한 스프레이 형태를 지닌 절화장미로 평가되었으며 절화수명은 11.4일로 '써니레이디' 보다 약간 짧았다.

Comparison of a Bodice Prototype for 20s Plus-size Women

  • Cha, Su-Joung
    • 한국컴퓨터정보학회논문지
    • /
    • 제27권4호
    • /
    • pp.79-88
    • /
    • 2022
  • 본 연구는 20대 비만 여성에게 적합한 보디스 원형 개발을 위해 프랑스, 일본 패션교육기관의 원형과 우리나라 교육용 원형 1개, 우리나라 산업체용 원형 2개 등 총 5개 패턴 제도법을 비교·분석하였다. 이를 통해 플러스 사이즈 여성 의복 개발에 적합한 보디스 원형 패턴 제도법을 알아보고자 하였다. 패턴제도를 위해 패턴1은 앞품, 뒤품, 젖가슴둘레, 목둘레, 등길이 등 가장 많은 신체치수를 적용하였고, 패턴2, 패턴4, 패턴5는 젖가슴둘레, 등길이를 기준으로 모든 패턴을 제작하였다. 외관평가 결과, 패턴3이 앞중심길이의 적합성, 옆허리둘레선 위치의 적합성 항목을 제외하고 모든 항목에서 가장 우수한 패턴으로 평가되었다. 그러나 옆선의 수직, 옆허리둘레선 위치의 적합성, 뒤진동둘레 위치 및 형태의 적합성, 뒤어깨다트 위치의 적합성 등의 항목에서는 부적합한 것으로 평가되었다. 보디스 원형은 젖가슴둘레 치수를 기준으로 대부분의 패턴 제도가 이루어지나 비만 여성의 경우 목둘레 설정, 어깨길이 설정에 있어서는 다른 제도법이 필요할 것으로 생각된다. 또, 복부 돌출로 앞중심길이 설정 방법에 대한 개발도 요구되었다.

양식해태의 유통에 관한 조사 연구 (A Study on Marketing of Cultured Laver Products)

  • 유충열
    • 수산경영론집
    • /
    • 제4권1_2호
    • /
    • pp.19-57
    • /
    • 1973
  • Laver io one of the most necessary and seasonal items in Korean food from oldtimes. Laver is lagely eaten in dried form, and its supply depends entirely upon culture weeds. The history of laver culture in Korea about sixty or seventy years is older than in Japan. Significance of laver culture is divided into two aspects, one is food supply in the nation, and the other is export to other countries. Houses engaged in laver culture are about foully thousands, and laver production in 1972 is estimated as 1, 3 bitten sheets. (1 sheet is a dried laver of 20 cm sq, in the shape of paper) Especcially meaning of layer production is the concentration of labour input, and systematic management of labour. From around 1920, the method of laver culture was introduced by Japanese Imperialism for mono culture in shallow seas, and mass products of laver is provided to Japan market, DOMESTIC MARKET Fundamental consume function calculates at below, $D_{(68_71)}$=16354 $Y^{0.471}$ $P^{-1.0662}$ where D is total layer demand, Y income variable, P price variable. It means income elasticity is 476. in the whole country, and price elasticity is 1, 07. But generally income elasticity is higher in urban area than in rural area, as shown at 1, 3 in Seoul city. Expence of laver in house expenditure is mutually correlated with another expence, See Table 12 about the relative function. See Table 14 and 16 about the relation between the gathering and the changes of price in auction, wholesale and retail price support system is for two effects, one of which is constraint of the upper price, the other is rise of the lower price. Before the system control, the equation in three year average calculated as below, $Y_{b}$ =18, 907.7455+15435.9364 t (r=0.89) where the origin t=0 is the November and the units are month. Post the system control, $Y_{p}$ =30, 047.9636+1, 631.1721t (r=0.97) therefore, this system has an effect only on the rise of lower price, Average annual margins of laver products at four market levels according to the consumer spent is below. EXPORTING MARKET Japanese demand function of laver products is, Log D=5, 289+1, 108 Log Y-1, 395 Log P (r=0.987) where D is Japanese laver demand, Y income variable, P price variable. according to which income elasticity is 1. 1 and price elasticity is 1.4. Laver production in 1970 tile highest record till then, is estimated as six billion sheets. But the recent improvement of laver culture techniques, the production of seeds and freezing storage of seeds has been stabilized. Futher new culture farms have been developed by means of break- water fences or by floating culture method. These improvements have been backed up with increased demand of laver products. Import quantity and price of Korean laver products are restrained by three organizations, that is producer, distributor and consumer. This relationship calculated by regression equation shows that import is influenced only producer organization, at the sacrifice of consumer profit. For increase to export of laver products, we urgently require to open foreign trade of laver products for Japanese consumer, .and Japan has political responsibility to solve Korean laver structure. But with long run timeseries, as regards Japanese production and import quantity, importing function shows increasing trend as below, 250 million sheets <3, 947.1674+0.005 $L_{g}$ >) 600 million sheets where $L_{q}$ is relative production quantity of laver in Japan. (unit; 100 thousand sheets) Our Export effort should be put on the highly processed products whithin the restraind quote.ote.

  • PDF

광자선 소조사면의 선량 측정에 관한 연구 (A Study on Dosimetry for Small Fields of Photon Beam)

  • 강위생;하성환;박찬일
    • 한국의학물리학회지:의학물리
    • /
    • 제5권2호
    • /
    • pp.57-68
    • /
    • 1994
  • 선형가속기에 의한 뇌정위적 방사선수술에 적용되는 원형 소조사변의 선량분포를 측정하기 위해 측정기 선정 이유와 선축 결정, 자체 제작한 소형 물 팬톰에 의한 선량분포 측정시 고려해야 할 점에 대해 논의하고, 치료계획에 필요한 자료인 Clinac-18의 10MV X-선의 TMR, OAR, 조사면 계수와 같은 선량분포 측정결과를 보고하고자 한다. 뇌정위적 방사선수술에 권고되고 있는 조사면 크기가 3cm 이하의 작은 조사면에 대한 선량 분포를 측정하기 위해서는 크기나 감도에 있어서 적합한 p-형 실리콘(Si) 검출기가 선량에 대한 선형성과 선량율 독립성이 적합한지 측정에 의해 판단하였다. 크기와 형태가 같은 아크릴 통을 두 개 제작하여 호스로 연결하여 하나는 물 팬톰으로 이용하고 다른 하나는 높이를 조절하여 측정기의 깊이를 조절하였다. 측정할 위치에서 직각 방향의 측방선량분포를 측정하여 선축의 위치를 찾았다. SAD 100cm 위치에서 조사면 크기 10, 20, 30, 40mm 네 개 콘에 대하여 TMR을 측정하였으며, 일정한 선원-측정기간 거리(SCD)에서 최대선량점깊이(d$_{max}$) 및 6, 10, 15cm 깊이에서 OAR을 측정하여 비교하였다. 조사면 계수는 MU당 SAD, d$_{max}$에서 콘에 대한 선량으로 실리콘 검출기로 측정하였다. 실리콘 검출기는 선량에 대한 선형성이 거의 완벽하였으며 감도는 선량율이 증가함에 따라 감소하였다. 낮은 선량율 때문에 조사면 밖의 선량을 약간 과대평가할 수 있을지라도 100MU/min 이상의 선량율에 대해서는 일정하였다. 직각 방향의 측방선량분포 측정에 의하여 선축을 찾는 방식은 간편하였다. 1cm 두께의 아크릴 판을 보조 물통 아래에 삽입ㆍ제거하는 방식으로 측정기의 깊이 조절도 간편하면서 정확하였다. 측정에 의한 TMR, OAR, 조사면 계수는 충분히 정확하여 뇌정위적 방사선수술의 치료계획에 이용할 수 있었으며, OAR은 조사면 범위 내에서는 깊이에 거의 무관하였다. 실리콘 검출기는 소조사면 선량분포 측정에 적합하였으며 직각 방향의 측방선량분포의 측정으로 0.05mm까지 정확히 선축을 찾을 수 있었고, 보조 물통과 아크릴 판을 이용하여 측정기의 깊이를 조절하는 것이 용이하였다. TMR, OAR, 조사면계수의 측정치는 뇌정위적 방사선수술의 치료 계획에 이용할 수 있을 정도로 정확하였으며, OAR은 하나의 깊이에서 측정해도 충분할 것이라고 사료된다.

  • PDF

나라꽃 무궁화 품종중 가로수용, 분화용 및 지피용으로 조경적 활용도가 높은 품종 선정 (Selection of Cultivars with Vigorous Growth Habit for Street Tree, Dwarf Tree Form for Pot Plants, and Spreading Branches for Groundcovers in the Recently Developed Cultivars of Rose of Sharon (Hibiscus spp.) for Landscape Uses)

  • 강호철;김동엽;하유미
    • 한국전통조경학회지
    • /
    • 제34권2호
    • /
    • pp.87-99
    • /
    • 2016
  • 본 연구는 조경수용 무궁화 우수품종 보급을 위한 유전자원 수집과 특성을 평가하기 위해 최근 국내외에서 육성된 127품종의 1년생 접목묘를 이용하여 2014년부터 2015년까지 2년 동안 생육 및 형태적 특성조사를 실시하였다. 수집된 품종 중 키가 큰 가로수 및 독립수용 품종, 왜성형 분화 및 지피용 품종 등을 선정하여 무궁화를 조경수로 활용도를 높이는데 기여하고자 하였으며 얻어진 결과는 다음과 같다. 최근 국내외에서 육성된 나라꽃 무궁화 품종들의 생육특성을 조사하기 위해 먼저 접목 1년생 수고를 조사한 결과 20~120cm까지 다양하게 나타났다. 무궁화 '주몽'과 '홍가로수', 종간교잡종 Hibiscus hybrid 'Daewangchun', 'Daeil', 'Lohengrin', 'Jina', 'Yeonam' 등이 키가 100cm 이상으로 가장 큰 품종으로 조사되었다. 최근 국내외에서 육성된 무궁화 127품종 중 조경적 활용가치가 높은 교목성 가로수로 이용할 수 있는 품종은 무궁화 '주몽'과 '홍가로수', 종간교잡종 Hibiscus hybrid 'Daewangchun', Hibiscus hybrid 'Daeil', Hibiscus hybrid 'Lohengrin', Hibiscus hybrid 'Jina', Hibiscus hybrid 'Yeonam' 등이 있었다. 분화 및 분재용으로 이용할 수 있는 왜성형 품종으로는 'Red Heart', '백령도', 종간교잡종 '진선', '꼬마', '여천', '야음' 등이 있었으며, 키가 30cm 미만의 아주 작은 품종으로는 '안동', '청조', 'Lil Kim' 등이 포함되었다. 수고가 작은 왜성형으로 가지의 생장이 아래로 향하는 '탐라', 'Melrose', '비단', '하이리', '별이', '병화', '미백', '한양', '청암', 'Lil Kim Violet', '종무', '은하수', 종간교잡종 Hibiscus hybrid 'Saehanseo'와 Hibiscus hybrid 'Yousoon'은 화단 및 지피용 소재로 이용가치가 높았다.