• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.596-598
• /
• 2001

This paper presents an analysis of the characteristics in switched reluctance motor (SRM). 2D finite element method (FEM) considering the iron saturation and the actual switching circuit of the SRM drive is applied for the dynamic analysis. The influence of the rotor shape on the radial force and torque ripple is investigated and the optimal shape of rotor pole is proposed to enhance the torque. The radial force characteristics acting on the surface of teeth is investigated by using the Maxwell's magnetic stress tensor method.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.796-802
• /
• 2005

Numerical analysis has been conducted for improving air flow characteristics in the exhaust aftertreatment system of diesel-fueled passenger cars by changing axial length and cone shape of a DPF diffuser. The results of air velocity and static pressure distributions along with air flow uniformity results suggest that a diffuser shape with 2D or 3D function type is better for air flow patterns in front of a DPF.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.301-312
• /
• 1996

A new approach is presented for recovering the 3-D shape from shading image. Photometric Stereo Method (PSM) is generally based on the direct illumination. In this paper, the reflectance function is derived by introduceing the indirect diffuse illumination in PSM and then applied to hybrid reflectance model which consists fo two components; the Lambertian reflectance and the speclar reflectance. Under the hybrid reflectance model and the indirect diffuse illumination circumstances, the 3-D shape of object can be recovered from the suface normal vector extracted from the surface roughness, the surface reflectance ratio, and the intensity value of a pixel. This method is rapid because of using the reference table and simplifies the restriction condition about the reflectance function existing in prior studies. The recovery efficiency in our method is better than that in prior studies. Also, this method is applied to various types of surfaces by defining general reflectance function.

• Journal of the Korean Society of Safety
• /
• v.11 no.1
• /
• pp.39-45
• /
• 1996

In this study, clustering of black BADUK stones' image were performed to recognize the individual stone from its closely spaced and partially occluded Image. And the clustering perfomance was compared between the classical methods and fuzzy C-means method. As a result, 2 BADUK stones' image was segmented precisely in every methods, but more than 3 stones the segmentation was depended on its shape. Fuzzy C-means method could be segmented correctly to 4 stones regardless of its shape, and It could be applied to the unknown number of clusters.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1
• /
• pp.10-15
• /
• 1999

We have studied a method to design and fabricate the Intermediate Frequency(IF) band pass filter with low shape factor which is used for CDMA base station on the 35°Y-cut X-propagation Quartz substrate. In order to fabricate a device of the low shape factor for the IF SAW filter on this substrate, we employed apodization weighted type interdigital transducer(IDT) as an input and withdrawal weighted type IDT as an output by using impulse modelling method. Also, using the Kaiser-Bessel window function, we have adopted 2200pairs and 1000pairs of input and oueut IDT respectively to minimize the effect of ripple. Furthermore, the width and the space of IDT finger are 3.6 ㎛ and 3.5 ㎛ respectively. Thus, we can have optimal results when the IDT thickness is 6000Å in consideration of the ratio of SAW's wavelength while it's aperture is 2mm for impedance matching. The fabricated SAW filter for CDMA had the property of almost 115.2MHz of a center frequency, less then 1.27MHz of bandwidth, less than 1.3 of shape factor, - l5dB of out band attenuation insertion loss and -45dB of rejection band.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.776-783
• /
• 2009

This paper is related to a 2D virtual color hairstyler using skinny smudge tool. The smudge tool is the popular graphic tool embedded in Adobe Photoshop. The smudge tool is used to smear paint on your canvas. The effect is much like finger painting. You can use the smudge tool by clicking on the smudge icon and clicking on the canvas and while holding the mouse button down, dragging in the direction you want to smudge. A disadvantage of previous smudge tool is to also smear pixels in the undesired region according to generating the target image as blending all pixels in a diameter of the master. In this paper to reduce the disadvantage, the skinny smudge tool based on the image segmentation for a master shape is proposed. The proposed skinny smudge tool has the advantage of applying the smudge effect to the desired regions regardless of the background as the master shape adhered closely to the contour shape is extracted by color image segmentation.

• Computers and Concrete
• /
• v.19 no.2
• /
• pp.211-216
• /
• 2017

Crack on concrete surface allows more rapid penetration of chlorides. Crack width and depth are dominant parameters for chloride behavior, however their effects on chloride penetration are difficult to quantify. In the present work, the previous anisotropic (1-D) model on chloride diffusion in concrete with single crack is improved considering crack shape and roughness. In the previous model, parallel-piped shape was adopted for crack shape in steady-state condition. The previous model with single crack is improved considering wedge shape of crack profile and roughness. For verifying the proposed model, concrete samples for nuclear power plant are prepared and various crack widths are induced 0.0 to 1.2 mm. The chloride diffusion coefficients in steady-state condition are evaluated and compared with simulation results. The proposed model which can handle crack shape and roughness factor is evaluated to decrease chloride diffusion and can provide more reasonable results due to reduced area of crack profile. The roughness effect on diffusion is evaluated to be 10-20% of reduction in chloride diffusion.

• Journal of the Korean Magnetic Resonance Society
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2007

An unequal site exchanging system induced by restricted rotation of 9-methyl group in 1,8-dichloro-9-triptycene has been studied by spin-lattice relaxation and 2D-EXSY experiments. The exchange rate obtained from relaxation studies is very well coincident to the result of line shape analysis, and the difference of the relaxation times ($T_1$) in two different sites has an important role to analyze 2D-EXSY experimental data.

• Journal of computational fluids engineering
• /
• v.9 no.1
• /
• pp.34-40
• /
• 2004

Recently with growth in the capability of super computers and Parallel computers, shape design optimization is becoming easible for real problems. Also, Computational Fluid Dynamics(CFD) techniques have been improved for higher reliability and higher accuracy. In the shape design optimization, analysis solvers and optimization schemes are essential. In this work, the Roe's 2nd-order Upwind TVD scheme and DADI time march with multigrid were used for the flow solution with the Euler equation and FDM(Finite Differenciation Method), GA(Genetic Algorithm) and Kriging were used for the design optimization. Kriging were applied to 2-D airfoil design optimization and compared with FDM and GA's results. When Kriging is applied to the nonlinear problems, satisfactory results were obtained. From the result design optimization by Kriging method appeared as good as other methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.68-73
• /
• 1999

Generally, most of machining processes are done according to the dimention of the draft made by CAD. However, there are many cases that a sample is given without the draft because of the simplicity of the shape in the machining of 2D objects. To cut the same shape as the given sample, this paper proposes the method to extract the geometric information about a large sample using the robot vision and to draw the demensional draft for the machining. Because the resolution of one frame in the vision system is too low, it is necessary to set up a camera according to the desired resolution and to capture the image moving along the contour. And the overall outline can be compounded of the sequentially captured images. In the experiment, we compared the product after the cutting with the original sample and found that the size of two objects was coincided within the allowed error bound.