• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1196-1202
• /
• 2013

This paper have analyzed the change of breakdown voltage for channel doping concentration and device parameters of double gate(DG) MOSFET using two dimensional potential model. The low breakdown voltage becomes the obstacle of power device operation, and breakdown voltage decreases seriously by the short channel effects derived from scaled down device in the case of DGMOSFET. The two dimensional analytical potential distribution derived from Poisson's equation have been used to analyze the breakdown voltage for device parameters such as channel length, channel thickness, gate oxide thickness and channel doping concentration. Resultly, we could observe the breakdown voltage has greatly influenced on device dimensional parameters as well as channel doping concentration, especially the shape of Gaussian function used as channel doping concentration.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.6
• /
• pp.7-15
• /
• 2007

A mechanical model was developed to predict the behavior of point-loaded RC slender beams (a/d > 2.5) without stirrups. It is commonly accepted by most researchers that a diagonal tension crack plays a predominant role in the failure mode of these beams, but the failure mechanism of these members is still debatable. In this paper, it was assumed that diagonal tension failure was triggered by the concrete cover splitting due to the dowel action at the initial location of diagonal tension cracks, which propagate from flexural cracks. When concrete cover splitting occurred, the shape of a diagonal tension crack was simultaneously developed, which can be determined from the principal tensile stress trajectory. This fictitious crack rotates onto the crack tip with load increase. During the rotation, all forces acting on the crack (i.e, dowel force of longitudinal bars, vertical component of concrete tensile force, shear force by aggregate interlock, shear force in compression zone) were calculated by considering the kinematical conditions such as crack width or sliding. These forces except for the shear force in the compression zone were uncoupled with respect to crack width and sliding by the proposed constitutive relations for friction along the crack. Uncoupling the shear forces along the crack was aimed at distinguishing each force from the total shear force and clarifying the failure mechanism of RC slender beams without stirrups. In addition, a proposed method deriving the dowel force of longitudinal bars made it possible to predict the secondary shear failure. The proposed model can be used to predict not only the entire behavior of point-loaded RC slender shear beams, but also the ultimate shear strength. The experiments used to validate the proposed model are reported in a companion paper.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.4
• /
• pp.295-298
• /
• 2008

A new Cymbidium cultivar 'White Princess' was released by the National Horticultural Research Institute (NHRI) in 2005. A cross was made in 1995 between 'Cymbidium 2113', light purple colored petal and medium plant sized variety, and 'Lucky Rainbow Randevous', a dark purple petal with red lip and large type variety. The ninety progenies were obtained after planting and acclimatization in green house. In 2000, a line (9526747) was selected and multipliticed after test of its flower color, leaf shape, flower stalk, and vigorous growing habit. After evaluation trial for two growing seasons, the selected line was named as 'White Princess'. The 'White Princess' has white petals (WN 155A) with red lip (RP59D) color and large sized leaves, and flowers (leaf length is about 88 cm and flower diameter is about 8 cm) with semi-erect flower stalks. Blooming started from December to January in optimal culture conditions. High temperature (more than $30^{\circ}C$) and low light intensity(less than 10,000Lux) should be avoided for the appropriate growth.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.611-614
• /
• 2010

A new poinsettia cultivar 'Heidi' was bred by the National Institute of Horticultural and Herbal Science (NIHHS) in 2004. A cross was made between 'Freedom Rose', a variety with vigorously growing deep pink color, and 'Red Velvet', a variety with dark green leaves and red bracts in 2001. 'Heidi' was finally selected in 2004 after the investigation of the growth and flower characteristics from 2002 to 2004. It has velvety red colored elliptic bracts and transitional leaves, and medium intensity of rugosity between bract veins. Leaf blade is dark green, ovate shape and lobes are shallow. Petiole length is relatively short and stem color is reddish. 'Heidi' has free-branching ability and plant height is short. The bracts and transitional leaves are fully colored 7.5 weeks after short day commencement.

• Atmosphere
• /
• v.29 no.1
• /
• pp.41-51
• /
• 2019

The characteristics of the sea breeze were investigated using the wind and temperature data collected from 300-m tower at Boseong from May 2014 to April 2018. Sea breeze day was detected using following criteria: 1) the presence of a clear change in wind direction near sunrise (between 1 hour after sunrise and 5 hours before sunset) and sunset (from 1500 LST to midnight), 2) presence of thermal forcing of sea breeze and 3) no heavy precipitation (rain < $10mm\;d^{-1}$). Sea breeze days occurred on 569 days for 4 years. The monthly distribution of sea breeze day occurrence shows maxima in May and September and minimum in December. The average onset and cessation times of the sea breeze are 0942 LST and 1802 LST, respectively. Although the 10-m wind shows clockwise rotation with time in the afternoon, the observed hodograph does not show an ideal elliptical shape and has different characteristics depending on the upper synoptic wind direction. Vertical structure of sea breeze shows local maximum of wind speed and local minimum of virtual potential temperature at 40 m in the afternoon for most synoptic conditions except for southeasterly synoptic wind ($60^{\circ}{\sim}150^{\circ}$) which is in the same direction as onshore flow. The local minimum of temperature is due to cold advection by sea breeze. During daytime, the intensity of inversion layer above 40 m is strongest in westerly synoptic wind ($240^{\circ}{\sim}330^{\circ}$) which is in the opposite direction to onshore flow.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.59.1-59.1
• /
• 2018

SNe light curves have been used to understand the expansion history of the universe, and a lot of efforts have gone into understanding the overall shape of the radioactively powered light curve. However, we still have little direct observational evidence for the theorized SN progenitor systems. Recent studies suggest that the light curve of a supernova shortly after its explosion (< 1 day) contains valuable information about its progenitor system and can be used to set a limit on the progenitor size, R*. In order to catch the early light curve of SNe explosion and understand SNe progenitors, we are performing a ~8hr interval monitoring survey of nearby galaxies (d < 50 Mpc) with 1-m class telescopes around the world. Through this survey, we expect to catch the very early precursor emission as faint as R=21 mag (~0.1 Rsun for the progenitor). In this poster, we outline this project, and provide updates on IMSNG projects during 2017/2018 seasons.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.119-128
• /
• 2020

An ultrasonic multiple scattering simulation using cross-section of fine dust particles were proposed. These days, along with awareness of air pollution, social interest in fine dust is increasing. In the construction field, awareness of fine dust is increasing, and research on preparing various countermeasures is underway. The light scattering method fine dust meter currently in use is affected by environmental factors such as relative humidity, and reliability problems in terms of accuracy are continuously reported. However, the transmission of ultrasonic waves can directly reflect the physical change of the medium based on the mechanical wave. Using these advantages of ultrasonic waves, fine dust measurement simulation was performed using the scattering cross section and ultrasonic multiple scattering theory. The shape data of the fine dust particles were collected using a SEM (Scanning Electron Microscope), and a cross-section according to the fine dust particles was derived through numerical analysis. As a result of signal processing, the error for the number density corresponding to each cross-section is minimum 19, maximum 3455.

• Geomechanics and Engineering
• /
• v.27 no.5
• /
• pp.447-463
• /
• 2021

Caisson-type structures are widely used as quay walls in coastal areas. In Korea, for a long time, many caisson-type quay walls have been constructed with a low front water depth. These facilities can no longer meet the requirements of current development. This study developed a new technology for deepening existing caisson-type quay walls using grouting and rubble mound excavation to economically reuse them. With this technology, quay walls could be renovated by injecting grout into the rubble mound beneath the front toe of the caisson to secure its structure. Subsequently, a portion of the rubble mound was excavated to increase the front water depth. This paper reports the results of an investigation of the seismic behavior of a renovated quay wall in comparison to that of an existing quay wall using centrifuge tests and numerical simulations. Two centrifuge model tests at a scale of 1/120 were conducted on the quay walls before and after renovation. During the experiments, the displacements, accelerations, and earth pressures were measured under five consecutive earthquake input motions with increasing magnitudes. In addition, systematic numerical analyses of the centrifuge model tests were also conducted with the PLAXIS 2D finite element (FE) program using a nonlinear elastoplastic constitutive model. The displacements of the caisson, response accelerations, deformed shape of the quay wall, and earth pressures were investigated in detail based on a comparison of the numerical and experimental results. The results demonstrated that the motion of the caisson changed after renovation, and its displacement decreased significantly. The comparison between the FE models and centrifuge test results showed good agreement. This indicated that renovation was technically feasible, and it could be considered to study further by testbed before applying in practice.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.4_2
• /
• pp.699-706
• /
• 2022

In this study, Directed energy deposition (DED) among additive manufacturing is applied to repair damaged spindle key parts of planner miller. The material of the spindle key is SCM415, and the P21 Powder is used. In order to find the optimal deposition conditions for DED equipment, a single-line deposition experiment is conducted to analysis five parameters. The laser power affects the width, and the height is a parameter affected by coaxial gas and powder gas. In addition, laser power, powder feed rate, coaxial gas, and powder gas are parameters that affect dilution. Otimal deposition is that 400 W of laser power, 4.0 g/min of powder feed rate, 6.5 L/min of coaxial gas, 3.0 L/min of powder gas and 4.5 L/min of shield gas. By setting the optimum conditions, a uniform deposition cross section in the form of an ellipse can be obtained. Damage recovery process of spindle key consists of 3D shape design of the base and deposition parts, deposition path creation and deposition process, and post-processing. The hardness of deposited area with P21 powder on the SCM415 spindle key is 336 HV for the surface of the deposition, 260 HV for the boundary area, and 165 HV for the base material.

• Korean Journal of Materials Research
• /
• v.32 no.8
• /
• pp.345-353
• /
• 2022

In this study, using deep learning, super-resolution images of transmission electron microscope (TEM) images were generated for nanomaterial analysis. 1169 paired images with 256 × 256 pixels (high resolution: HR) from TEM measurements and 32 × 32 pixels (low resolution: LR) produced using the python module openCV were trained with deep learning models. The TEM images were related to DyVO₄ nanomaterials synthesized by hydrothermal methods. Mean-absolute-error (MAE), peak-signal-to-noise-ratio (PSNR), and structural similarity (SSIM) were used as metrics to evaluate the performance of the models. First, a super-resolution image (SR) was obtained using the traditional interpolation method used in computer vision. In the SR image at low magnification, the shape of the nanomaterial improved. However, the SR images at medium and high magnification failed to show the characteristics of the lattice of the nanomaterials. Second, to obtain a SR image, the deep learning model includes a residual network which reduces the loss of spatial information in the convolutional process of obtaining a feature map. In the process of optimizing the deep learning model, it was confirmed that the performance of the model improved as the number of data increased. In addition, by optimizing the deep learning model using the loss function, including MAE and SSIM at the same time, improved results of the nanomaterial lattice in SR images were achieved at medium and high magnifications. The final proposed deep learning model used four residual blocks to obtain the characteristic map of the low-resolution image, and the super-resolution image was completed using Upsampling2D and the residual block three times.