• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.911-913
• /
• 2004

This paper presents characteristic analysis of claw-pole type generator. The analysis is performed using 2D equivalent model by 2D FEM. 3D FEM is used to check whether 2D equivalent model reflects the magnetic characteristics of the actual machine. Initially, 2D equivalent model of the claw-pole type generator is designed only by 3D geometry. Using 2D equivalent model, back emf characteristics are estimated and compared to measurements. The analysis results agree with measurements well and take less time comparing to 3D FEM.

• 한국멀티미디어학회논문지
• /
• 제10권4호
• /
• pp.527-536
• /
• 2007

본 논문에서는 의복의 2차원 패턴을 이용하여 3차원 의복 모델을 제작하고 생성된 3차원 의복을 3차원 인체 모델에 자동으로 착의하는 3차원 패션 디자인 시스템을 제안한다. 이 시스템에서는 먼저 2차원 격자의 코너 점을 이용하여 2차원 옷감 조각을 디자인한 다음에 2차원 옷감 조각들 사이에 재봉되어야 할 제약점들을 기술함으로써 3차원 의복을 디자인한다. 그 다음에는 3차원 인체 모델 파일과 3차원 의복을 읽어 들인 다음 질량-스프링 모델에 기반한 물리적 시뮬레이션에 의해 의복을 착용한 3차원 모델을 생성한다. 본 논문의 시스템은 사실적인 시뮬레이션을 위하여 인체 모델을 구성하는 삼각형과 의복을 구성하는 삼각형 사이의 충돌을 검사하고 반응 처리를 수행하였다. 인체를 구성하는 삼각형의 수가 매우 많으므로, 이러한 충돌 검사 및 반응 처리는 많은 시간을 필요로 한다. 이 문제를 해결하기 위하여 본 논문에서는 Octree 공간 분할 기법을 이용하여 충돌 검사 및 반응 처리 수를 줄였으며 수초 이내에 가상 인체 모델에 의복을 입힐 수 있었다.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 1부
• /
• pp.772-779
• /
• 2006

The new model proposed in this paper is the hidden Markov mesh model or the 2D HMM with the causality of top-down and left-right direction. With the addition of the causality constraint, two algorithms for the evaluation of a model and the maximum likelihood estimation of model parameters have been developed theoretically which are based on the forward-backward algorithm. It is a more natural extension of the 1D HMM than other 2D models. The proposed method will provide a useful way of modeling highly variable image patterns such as offline cursive characters.

• 방송공학회논문지
• /
• 제25권7호
• /
• pp.1095-1106
• /
• 2020

In this paper, we propose an algorithm that extracts a high-precision 3D skeleton using a model generated using a distributed RGB-D camera. When information about a 3D model is extracted through a distributed RGB-D camera, if the information of the 3D model is used, a skeleton with higher precision can be obtained. In this paper, in order to improve the precision of the 2D skeleton, we find the conditions to obtain the 2D skeleton well using the PCA. Through this, high-quality 2D skeletons are obtained, and high-precision 3D skeletons are extracted by combining the information of the 2D skeletons. Even though this process goes through, the generated skeleton may have errors, so we propose an algorithm that removes these errors by using the information of the 3D model. We were able to extract very high accuracy skeletons using the proposed method.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 1부
• /
• pp.355-361
• /
• 2006

In large scale environments like airport, museum, large warehouse and department store, autonomous mobile robots will play an important role in security and surveillance tasks. Robotic security guards will give the surveyed information of large scale environments and communicate with human operator with that kind of data such as if there is an object or not and a window is open. Both for visualization of information and as human machine interface for remote control, a 3D model can give much more useful information than the typical 2D maps used in many robotic applications today. It is easier to understandable and makes user feel like being in a location of robot so that user could interact with robot more naturally in a remote circumstance and see structures such as windows and doors that cannot be seen in a 2D model. In this paper we present our simple and easy to use method to obtain a 3D textured model. For expression of reality, we need to integrate the 3D models and real scenes. Most of other cases of 3D modeling method consist of two data acquisition devices. One for getting a 3D model and another for obtaining realistic textures. In this case, the former device would be 2D laser range-finder and the latter device would be common camera. Our algorithm consists of building a measurement-based 2D metric map which is acquired by laser range-finder, texture acquisition/stitching and texture-mapping to corresponding 3D model. The algorithm is implemented with laser sensor for obtaining 2D/3D metric map and two cameras for gathering texture. Our geometric 3D model consists of planes that model the floor and walls. The geometry of the planes is extracted from the 2D metric map data. Textures for the floor and walls are generated from the images captured by two 1394 cameras which have wide Field of View angle. Image stitching and image cutting process is used to generate textured images for corresponding with a 3D model. The algorithm is applied to 2 cases which are corridor and space that has the four wall like room of building. The generated 3D map model of indoor environment is shown with VRML format and can be viewed in a web browser with a VRML plug-in. The proposed algorithm can be applied to 3D model-based remote surveillance system through WWW.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.73-83
• /
• 2016

PURPOSES : The purpose of this study is to develop a method for improving the accuracy of analysis results obtained from a two-dimensional (2-D) numerical analysis model of continuously reinforced concrete pavement (CRCP). METHODS : The analysis results from the 2-D numerical model of CRCP are compared with those from more rigorous three-dimensional (3-D) models of CRCP, and the relationships between the results are recognized. In addition, the numerical analysis results are compared with the results obtained from field experiments. By performing these comparisons, the calibration factors used for the 2-D CRCP model are determined. RESULTS : The results from the comparisons between 2-D and 3-D CRCP analyses show that with the 2-D CRCP model, concrete stresses can be overestimated significantly, and crack widths can either be underestimated or overestimated by a slight margin depending on the assumption of plane stress or plane strain. The behaviors of crack width in field measurements are comparable to those obtained from the numerical model of CRCP. CONCLUSIONS : The accuracy of analysis results from the 2-D CRCP model can be improved significantly by applying calibration factors obtained from comparisons with 3-D analyses and field experiments.

• 한국콘텐츠학회논문지
• /
• 제8권1호
• /
• pp.212-227
• /
• 2008

3D 얼굴 모델링은 33공간에서 얼굴을 자유롭게 회전 시켜 다양한 얼굴 자세를 표현하고 조명 효과도 적절하게 모델링 할 수 있으므로, 얼굴 자세, 조명, 표정 등의 표현에 있어서 2D 얼굴 모델링에 비해 보다 정교하며 사실감이 뛰어나 얼굴 인식, 게임, 아바타 등에서 많은 요구가 존재한다. 본 논문에서는 3D 변형 가능 형상 모델에 기반을 둔 3D 얼굴 모델링 방법을 제안한다. 제안된 3D 얼굴 모델링 방법은 먼저 3D 스캐너를 통하여 획득한 3D 얼굴 스캔 데이터를 이용하여 3D 얼굴 변형 가능 형상 모델을 구축한다. 다음, 3D 얼굴 모델링을 하고자 하는 얼굴의 2D 이미지 시퀀스로부터, 해당 얼굴의 특징점들을 검출하고 이들을 매칭하여, 매칭된 특징점들로부터 인수분해 기반 SfM 기법을 이용하여 해당 특징점의 3D 버텍스 좌표 값을 구한다. 이후, 구한 3D 버텍스들을 3D 변형 가능 형상 모델에 정합하여 해당 얼굴의 3D 형상 모델을 얻는다. 또한, 2D 얼굴 이미지 시퀀스들로부터 뷰 독립적인 2D 원통 좌표 텍스쳐 맵을 구하고 이를 이용하여 3D 형상 모델을 렌더링 함으로써, 최종적으로 3B 얼굴 모델을 완성한다. 제안된 3D 얼굴 모델링 방법에 의한 3D 얼굴 모델 생성 과정을 통해서, 본 논문에서 제안한 3D 얼굴 모델링 방법이 기존의 얼굴 모델링 방법들에 비해 상대적으로 빠르고 비교적 정교하게 수행됨을 볼 수 있었다.

• 대한치과기공학회지
• /
• 제41권4호
• /
• pp.287-293
• /
• 2019

Purpose: To evaluate the accuracy of the 3D printed die models and to investigate its clinical applicability. Methods: Stone die models were fabricated from conventional impressions(stone die model; SDM, n=7). 3D virtual models obtained from the digital impressions were manufactured as a 3D printed die models using a 3D printer(3D printed die models;3DM, n=7). Reference model, stone die models and 3D printed die models were scanned with a reference scanner. All dies model dataset were superimposed with the reference model file by the "Best fit alignment" method using 3D analysis software. Statistical analysis was performed using the independent t-test and 2-way ANOVA (α=.05). Results: The RMS value of the 3D printed die model was significantly larger than the RMS value of the stone die model (P<.001). As a result of 2-way ANOVA, significant differences were found between the model group (P<.001) and the part (P<.001), and their interaction effects (P<.001). Conclusion: The 3D printed die model showed lower accuracy than the stone die model. Therefore, it is necessary to further improve the performance of 3D printer in order to apply the 3D printed model in prosthodontics.

• Geomechanics and Engineering
• /
• 제17권4호
• /
• pp.317-322
• /
• 2019

This paper presents the results of parametric analyses to compute the axial capacity of a suction pile using 2D and 3D finite element approaches. The study is intended to simplify the process of analyzing suction piles from 3D to 2D model. The research focuses on obtaining the coefficient to be applied into the 2D model in order to obtain results that are as close as possible to the 3D model. Two 2D models were used in the analysis, namely the plane strain and axisymmetric models. The analyses were performed using two actual offshore soil data of the North and West Java Indonesia. The study reveals that the simplification of model through 2D Finite Element is achievable by applying the appropriate coefficient to the stiffness parameters. The results show that the simplified model of the 2D FEA provides more conservative results (with the difference between 2% to 7%) than the 3D FEA.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.183-188
• /
• 2007

In this paper, we propose a 2D-FE model in single impact with combined physical factors to obtain a unique residual stress by shot peening. Applied physical parameters include elastic-plastic deformation of shot ball, material damping coefficients, strain rate, dynamic friction coefficients. Single impact FE model consists of 2D axisymmetric elements. The FE model with combined factors showed converged and unique distributions of surface stress, maximum compressive residual stress and deformation depth. Further, in contrast to the FE models with rigid shot and elastic deformable shot, FE model with plastic deformable shot produces residual stresses very close to experimental solutions by X-ray diffraction. We therefore validated the 2D FE model with combined peeing factors and plastic deformable shot. This FE model will be a base of the 3D FE model for residual stresses by multi-impact shot peening.