• Korean Journal of Food Science and Technology
• /
• v.33 no.2
• /
• pp.245-251
• /
• 2001

This research was conducted to study the changes in physical characteristics of mushrooms (Agaricus bisporus) as influenced by drying methods. Samples were dried using either hot air drying, vacuum drying, or freeze drying and changes in the color, browning index, hardness and rehydration rate were evaluated by response surface methodology. Hot air drying resulted in the fastest drying of sample as compared to other methods. The rate of drying was most affected by the environmental temperature rather than air velocity or vacuum pressure. The overall color difference increased as the temperature and air velocity increased. The overall color changes of the freeze dried samples were minimal as compared to those of fresh mushrooms. The hot air dried samples showed the greatest changes in the overall color, browning index as well as hardness. The freeze dried samples showed the best rehydration characteristic and maintained the best overall quality after drying.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.2
• /
• pp.84-89
• /
• 2009

The turbid/translucent, near colorless(milky) metamorphic sapphire samples from Sri Lanka have been characterized after the heat treatment in $N_2$ at $1650^{\circ}C$. As-received sapphire specimens became bluish-colored and exhibited more clarity after the heat treatment. It was found that the color change at inclusions zoning region is attributed by the dissolution. As received samples contain the micro/nano inclusions such as rutile($TiO_2$), ilmenite($FeTiO_3$), spinel($MgAl_{2}O_{4}$)/ulvospinel($Fe_{2}TiO_{4}$) and apatite($Ca_5(PO_4)_3$), which were dissolved by the heat treatment and form the blue color through $Fe^{2+}/Ti^{4+}$ charge transferring. The microstructures become different because as the dissolution of apatite($Ca_5(PO_4)_3(OH,F,Cl)$) in alumino silicates($Al_{2}SiO_{5}$) occurred, resulting in morphological change with the appearance of(Ca, Mg, Al) silicate on the surface. Both as-received and heat treated samples showed the rhombohedral crystal structure of $Al_{2}O_{3}$.

• Ocean Science Journal
• /
• v.41 no.2
• /
• pp.121-124
• /
• 2006

Argo drifters provide information of the vertical structure in the water column and have a potential for the improvement of understanding phytoplankton primary production and biogeochemical cycles in combination with ocean color satellite data, which can obtain the horizontal distribution of phytoplankton biomass in the surface layer. Our examples show that using Argo drifters with satellite-measured horizontal distribution of phytoplankton biomass at the sea surface allow an improved understanding of the development of the spring bloom. The other possible uses of Argo drifter are discussed.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.15-28
• /
• 2007

For the color offset printing, it starts with input of data. The past days, drum scanner or flat scanner used to input of data, but now it changes gradually into using of digital camera because digital camera become popular. The high quality digital camera saves as a data(RAW format), sRGB which have built in digital camera, or Adobe RGB format. sRGB of ICC(International Color Consortium) profile is a standard color gamut of digital camera. Distribution of color gamut in sRGB is less than Adobe RGB have a distribution in ICC profile. sRGB also can not be expressed in some specific part, because distribution of color gamut in sRGB is not able to cover all parts in ICC Profile of international standards CMYK. It is more popular to use Adobe RGB than sRGB to do high quality offset printing and software basis color setting in Europe and Japan. In spite of this data basis, there is a difficulty of doing color correction between the color proofing prints and the final prints. To see how the software color setting effects to RGB data, this thesis will use Gretag Macbeth ColorChecker 24 patch which has the most general natural color chart to compare sRGB and Adobe RGB to check the differences of color changes. It will use the several factors that came out from the process of making ICC Profile to figure out the optimum In-house profile. It also compares the differences of using matt paper and glossy paper to do best quality color proof offset printing, and how the Rendering Intent effects the proof print.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.627-627
• /
• 2013

Recently, most studies concerning inorganic CdSe/ZnS quantum dot (QD)-polymer hybrid LEDs have been concentrated on the structure with multiple layers [1,2]. The QD LEDs used almost CdSe materials for color reproduction such as blue, green and red from the light source until current. However, since Cd is one of six substances banned by the Restriction on Hazardous Substances (RoHS) directive and classified into a hazardous substance for utilization and commercialization as well as for use in life, it was reported that the use of CdSe is not suitable to fabricate a photoelectronic device. In this work, we demonstrate a novel, simple and facile technique for the synthesis of ZnO-graphene quasi-core.shell quantum dots utilizing graphene nanodot in order to overcome Cd material including RoHS materials. Also, We investigate the optical and structural properties of the quantum dots using a number of techniques. In result, At the applied bias 10 V, the device produced bluish-white color of the maximum brightness 1118 cd/$m^2$ with CIE coordinates (0.31, 0.26) at the bias 10 V.

• Korean Journal of Materials Research
• /
• v.18 no.3
• /
• pp.159-162
• /
• 2008

$Eu^{3+}$-activated $R_3GaO_6$ (R = Y, Gd) phosphors were prepared in a conventional solid-state reaction and their optical properties were investigated. These compounds exhibit strong red emission under light excitation at 254 nm. The emission spectra are dominated by peaks appearing around 610-630 nm that are induced by the electric dipole transition of $^5D_0\;{\rightarrow}\;^7F_2$ of $Eu^{3+}$. In addition, the appropriate CIE (Commission Internationale de l'clairage) chromaticity coordinates, (x = 0.656, y = 0.336) for $Y_3GaO_6$ and (x = 0.655, y = 0.334) for $Gd_3GaO_6$, become closer to the NTSC (National Television System Committee) standard values. With the optimized activator concentrations, the maximum emission brightness is approximately 80% of $Y_2O_3$:$Eu^{3+}$ typical red-emitting phosphor with improved color purity under an excitation condition of 254 nm.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.2 no.1
• /
• pp.21-25
• /
• 2021

We measured the sizes of microstructures and the reflectance of blue feathers in the Common Kingfisher (Alcedo atthis). The colors were mainly produced in the barbs, which were composed of keratin sponge layers with air spaces and melanin rods. The reflectance spectra of back and tail feathers of the Common Kingfisher showed a peak with a broad plateau in the visible wavelength, whereas those of the wing feathers showed peaks in ultraviolet and visible and short-wavelengths. Moreover, the reflectance of back and tail feathers was higher than that of wing feathers. The blue color of the feathers comes from the keratin sponge layer due to coherent scattering. The back and tail feathers are composed of the keratin sponge layer only, and the wing feathers are composed of the keratin sponge layer and the keratin honeycomb structure. Due to the difference in these structures, it supposed that the reflectance is different. Determining why the reflectance spectra of the back and tail feathers were flattened will require further study.

• Korean Journal of Poultry Science
• /
• v.29 no.4
• /
• pp.287-292
• /
• 2002

This study was conducted to investigate the changes of pH, TBA, meat color and sensory evaluation on duck meat fed supplemental Bamboo vinegar during storage period at 4$^{\circ}C$ . Experiment animals (five-wk-old, Cherry Valley F$_1$, 100 chicks) were randomly assigned in four treatment groups. Treatments were control, 1%, 2% and 4% based on Bamboo vinegar addition. There was no PH difference in breast meat between groups on day 1 of storage, while pH of bamboo vinegar supplemented group was sustained hi호 after 3 days. TBA values of Bamboo vinegar treated groups were significantly lower than control group (P<0.05) and were steady change during storage. The color value in lightness no difference between groups during the storage. The control was significantly increased in 6 d and 9 d, while the bamboo vinegar treated groups no difference during storage. The redness and yellowness in bamboo vinegar treatment were decreased in 3 d and 9 d storage. The decrease in yellowness was outstandingly observed in bamboo vinegar 1% and 2% treatment (P<0.05). The odor in terms of sensory evaluation was improved by supplemental bamboo vinegar treatment. The significant differences were observed on 1 d, 3 d and 6 d storage (P<0.05). The appearance of sensory evaluation of supplemental Bamboo vinegar treated groups (P<0.05) was significantly different in 1 d and 3 d storage. The results of this study indicate that the supplemental Bamboo vinegar 1% and 2% may improve meat quality during storage period in duck meat.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.2
• /
• pp.179-187
• /
• 2015

Experiments designed to measure the effect of LED (light-emitting diode) light wavelength on the growth of fingerling rockfishes (Sebastes inermis) were conducted. Fingerling rockfishes (average body weight of individual: 1.13g) were divided into two groups by wavelength of the LED light [light power: 1,620 mW; wavelength: 518 nm (green color), 622 nm (red color)]. Triplicate groups of 180 individuals were reared over 7 weeks. Lighting duration was 14 hours from 06:00 to 20:00. A water tank exposed on the natural light in a room through the windows was used as a control. At results of the first experiment [initial average body weight (BW) of individual: 1.13 g; standard deviation (SD): 0.13 g], the final individual BW exposed on the green color was increased 0.39 g than the red color, and decreased 0.12 g than the natural light in the room. At results of the second (initial individual BW: 5.07 g; SD: 0.70 g) and the third experiment (initial individual BW: 10.67 g; SD: 0.67 g), the final individual BW exposed on the green color was increased 1.07 g and 2.55 g than the red color, respectively, and increased 0.57 g and 0.84 g than the natural light, respectively. The relative growth rate of the green color was higher about 8% significantly (p<0.05) than the natural light. In the case of the red color the relative growth rate was lower significantly (p<0.05) than the natural light.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.3
• /
• pp.1-7
• /
• 2009

This paper suggests an automatic electrophoretic deposition (EPD) robot system using a color mono camera. The EPD robot system consists of a 2 DOF rectangular robot to practically carry out EPD tasks, and a color mono camera to automatically control the robot. The screws are used to actuate the robot with low speed of 10mm/s for EPD tasks. The color mono camera detects the color marks attached to the robot and beakers, and obtains their positions. The obtained positions are used for automatic robot control. Also, the camera recognizes the combinations of the markers attached to the beakers, and determines the selected EPD task among various predetermined EPD tasks with different working parameters. Finally, experimental results are shown for verifying the effectiveness of the suggested EPD robot system.