• Journal of Food Hygiene and Safety
• /
• v.33 no.3
• /
• pp.193-199
• /
• 2018

In this study, PAT protein of genetically modified maize was prepared from the recombinant E. coli strain BL21 (DE3), and mice were immunized with the recombinant PAT protein. After cell fusion and cloning, two hybridoma cells (PATmAb-7 and PATmAb-12) were chosen since the monoclonal antibodies (Mabs) produced by them were confirmed to be specific to PAT protein in the indirect enzyme-linked immunsorbent assay (ELISA) and western blot tests. There were no cross-reactions of either Mabs to other GM proteins or to the extracts of non-GM maize. The ELISA based on the PATmAb-7 can sensitively detect 0.3 ng/g PAT protein in corn. These results indicate that the developed Mabs can be used as bio-receptors in the development of immunosensors and biosensors for the rapid and simple detection of GM corn adulterated in foods.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.12
• /
• pp.1149-1153
• /
• 1996

Ab initio and extended Huckel calculations were carried out on the isomers of trans-RhCl(η2-C2H2)(PH3)2 (1). Due to π-back donation in 1 complex, the rotational energy barrier of alkyne ligand is computed to be in the range of 18.6-25.2 kcal/mol at MP4 levels. The optimized hydrido-alkynyl complex (2) at ab initio level has the distorted trigonal bipyramidal structure. Vinylidene complex (3) is computed to be more stable than 1 complex by 17.1 kcal/mol at MP4//MP2 level. The stabilities of isomers show similar trend at the various level calculations, that is, EHT, MP4//HF, and MP4//MP2 levels. The optimized geometries at ab initio level are in reasonable agreement with experimental data. A detailed account of the bonding in each isomers (1-3) have been carried out in terms of orbital analyses.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.530-545
• /
• 1996

The purpose of this study was to investigate by spectrophotometry the changes in color parameters of composite resins after exposure to distilled water, filtered coffee, and artificial saliva. Five kinds of fine particle composite resin in experiment 1, and six kinds of composite resin in experiment 2 were used. In experiment 1, each group of composite resin was stored in distilled water at $4^{\circ}C$, $50^{\circ}C$, and filtered coffee solution at $4^{\circ}C$, $50^{\circ}C$. And then each specimen was measured by spectrophotometer. Measurements were repeated in 1 hour, 2 hours, 4 hours, 8 hours, 16 hours, 24 hours, and 48 hours. In experiment 2, all specimens of each brand were stored in distilled water at $37^{\circ}C$, artificial saliva not contained mucin at $37^{\circ}C$, and artificial saliva contained mucin at $37^{\circ}C$. All specimens of each brand were measured by spectrophotormeter in 1 week, 2 weeks, 4 weeks, 8 weeks, and up to 12 weeks. The results were as follows : 1. In cold coffee, five of fine particle composite resins showed ${\Delta}E{^*}_{ab}$ values less than 2. However, in hot coffee ${\Delta}E{^*}_{ab}$ values of Amelogen Universal and Prisma TPH were higher than those of Conquest Crystal, ${\AE}$litefil and Z100. 2. Z100 and ${\AE}$litefil had better cleansibility of extrinsic coffee staining than Amelogen Universal, Conquest Crystal and Prisma TPH. 3. In distilled water and artificial saliva not contained mucin, five of fine particle composite resin showed ${\Delta}E{^*}_{ab}$ values less than 2 up to 12 weeks. However, Silux Plus showed higher than ${\Delta}E{^*}_{ab}$ values of fine particle composite resin. 4. As an immersion solution for discoloration experiment, artificial saliva not contained mucin showed similar appearance as distilled water. However, artificial saliva contained mucin had different appearance from the others. 5. In artificial saliva contained mucin, ${\AE}$litefil, Prisma TPH and Z100 showed ${\Delta}E{^*}_{ab}$ values less than 1 up to 12 weeks. However, Silux Plus, Amelogen Universal and Conquest Crystal showed ${\Delta}E{^*}_{ab}$ values more than 1 up to 12 weeks. But, Conquest Crystal showed different characteristics of chromacity difference value(less chromatic) and lightness difference value(lighter) from Silux Plus and Amelogen Universal.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.8
• /
• pp.1177-1184
• /
• 2005

Ab initio quantum chemical molecular orbital calculations have been performed for the unimolecular decomposition of methacrylonitrile ($CH_3C(CN)=CH_2$), especially for HCN and $H_2$ molecular elimination channels. Structures and energies of the reactants, products, and relevant species along the individual reaction pathways were determined by MP2 gradient optimization and MP4 single point energy calculations. Direct four-center elimination of HCN and three-center elimination of H2 channels were identified. In addition, H or CN migration followed by HCN or H2 elimination channels via the methylcyanoethylidene intermediate was also identified. Unlike the case of crotonitrile previously studied, in which the dominant decomposition process was the direct three-center elimination of HCN, the most important reaction pathway should be the direct threecenter elimination of $H_2$ in the case of methacrylonitrile.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.235-240
• /
• 2007

Molecular structures were optimized for the 1,3-diethoxycalix[4]crown-5-ether (2) in the various isomers and their potassium-ion complexes by using B3LYP/6-31+G(d,p)//B1LYP/6-31G(d,p) method after ab initio RHF/6-31G calculation. The cone-shaped isomer of 2 with cr-binding mode has shown the strongest binding efficiency among the six different complexes attributed to seven electrostatic interactions between the potassium cation and the oxygen atoms of crown-5-ether and ethoxy groups of the host (2). The vibrational spectra of 2 and its K+-complexes were obtained by restricted Hartree-Fock (RHF) calculations with the 6-31G basis set. The characteristic vibrational frequencies of various C-O-C stretching and bending motions are analyzed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.114-119
• /
• 1998

Intensity and stability of the blue color of phospho-molybdate complex in P analysis are known to be influenced by the matrix, reducing regent and acidity of the extractants. Objective of this research was to compare the efficiency of the color-developing reagents for P concentrations in distilled water and extracts of Lancaster, Mehlich II, and Mehlich III methods. Efficiencies on which to base this study were evaluated by the optimum ranges of P, reproducibility of calibration curve and stability of the developed color. Color-developing reagents employed were ammonium molybdate-1,2,4- aminonaphtholsulfonic acid (ANS), ammonium molybdate-ascorbic acid-bismuth subcarbonate (AB), and ammonium molybdate-ascorbic acid-antimony potassium tartarate (AA). The ANS revealed the lowest sensitivity but the widest ranges for P concentrations in color development. On the other hand, the AA bore the narrowest color-developing ranges and its sensitivity was similar to AB. However, at P concentrations lower than $0.5mg\;L^{-1}$, AA was more sensitive than AB. Based on the data on the ranges of calibration curve, stability of color and reproducibility of analytical data. AA reagent was considered to be suitable for the determination of P in distilled water and AB reagent was practically recommendable for soil P analysis in extracts by Lancaster, Mehlich II, and Mehlich III procedures.

• Journal of the Korean Chemical Society
• /
• v.57 no.1
• /
• pp.63-72
• /
• 2013

Some vanadyl complexes were synthesized by treating a methanolic solution of the appropriate Schiff base ligand and one equivalent of $VO(SO_4)_2$ to yield [($VOL_2^{1-14}$)](L=Salicylaldehyde's derivatives, Schemes 1, 2). These oxovanadium (IV) complexes were characterized based on their FT-IR, UV-Vis spectroscopy and elemental analysis. The IR spectra suggest that coordination takes place through azomethine nitrogen and phenolate oxygen. In addition, the formation constants of the oxovanadium (IV) binary complexes were determined in methanolic medium. The ab initio calculations were also carried out to determine the structural and the geometrical properties of one of the complexes and its calculated vibrational frequencies were investigated.

• Korean Journal of Agricultural Science
• /
• v.44 no.3
• /
• pp.392-399
• /
• 2017

The present study was conducted to investigate the effects of different dietary proteins as fraction-enriched protein, defined by Cornell net carbohydrates and protein system (CNCPS), on in vivo ruminal fermentation pattern and blood metabolites in Holstein steers fed total mixed ration (TMR) containing 17.2% crude protein. Four ruminally cannulated Holstein steers in a $4{\times}4$ Latin square design consumed TMR only (control) and TMR with rapeseed meal (AB1), soybean meal (B2), and perilla meal (B3C). Each protein was substituted for 23.0% of crude protein in TMR. Rumen digesta were taken through ruminal cannula at 1 h interval during the feeding cycle in order to analyze ruminal pH, ammonia-N, and volatile fatty acids (VFA). Plasma metabolites in blood taken via the jugular vein after the rumen digesta sampling were analyzed. Feeding perilla meal significantly (p < 0.05) decreased mean ruminal pH compared with control and the other protein feeding groups. Compared with control, feeding protein significantly (p < 0.05) increased ruminal ammonia-N concentration except for AB1. Statistically (p > 0.05) similar total VFA appeared among control and the supplemented groups. However, control, AB1, and B2 showed higher (p < 0.05) acetate concentrations than B3C, and propionate was vice versa. CNCPS fractionated protein significantly (p < 0.05) affected concentrations of albumin and total protein in blood; i.e. plasma albumin was lower for control and B2 groups than AB1 and B3C groups. Despite lack of significances (p > 0.05) in creatinine and blood urea nitrogen, AB1 and B2 groups were numerically higher than the others.

• The Plant Pathology Journal
• /
• v.36 no.2
• /
• pp.148-156
• /
• 2020

Pseudomonas syringae pv. tabaci 6605 has two multidrug resistance (MDR) efflux pump transporters, MexAB-OprM and MexEF-OprN. To understand the role of these MDR efflux pumps in virulence, we generated deletion mutants, ΔmexB, ΔmexF, and ΔmexBΔmexF, and investigated their sensitivity to plant-derived antimicrobial compounds, antibiotics, and virulence. Growth inhibition assays with KB soft agar plate showed that growth of the wild-type (WT) was inhibited by 5 μl of 1 M catechol and 1 M coumarin but not by other plant-derived potential antimicrobial compounds tested including phytoalexins. The sensitivity to these compounds tended to increase in ΔmexB and ΔmexBΔmexF mutants. The ΔmexBΔmexF mutant was also sensitive to 2 M acetovanillone. The mexAB-oprM was constitutively expressed, and activated in the ΔmexF and ΔmexBΔmexF mutant strains. The swarming and swimming motilities were impaired in ΔmexF and ΔmexBΔmexF mutants. The flood inoculation test indicated that bacterial populations in all mutant strains were significantly lower than that of WT, although all mutants and WT caused similar disease symptoms. These results indicate that MexAB-OprM extrudes plant-derived catechol, acetovanillone, or coumarin, and contributes to bacterial virulence. Furthermore, MexAB-OprM and MexEF-OprN complemented each other's functions to some extent.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.63-72
• /
• 2006

Purpose: The purpose of this study was to compare the accuracy of master cast fabricated by using different impression methods at the different impression levels. Material and Method: The master model used in this study was resin block having low implant analogs. Impression method studied were 1) direct method on future level (Group FIX-D), 2) Indirect method on fixture level(Group FIX-I), 3) Modified indirect method on fixture level(Group FD(-M), 4) Direct method on abutment level(Group AB-D) and 5) Indirect method on abutment level(Group AB-I). Each of the five groups took 10 impressions. Fifty impressions were made for master cast by using Impregum $F^(R)$ impression material loaded on individual tray. Three dimensional measuring microscope was used to measure the inter-implant distance. Error rate of each inter-implant distance were calculated and evaluated. Results: The results were as follows. 1. Group FIX exhibited higher accuracy than group AB. 2 In group FIX, modified indirect method showed the highest accuracy, while indirect method showed the lowest accuracy. In group Ab, indirect method showed the higher accuracy than direct method. 3. Group FIX showed larger horizontal error than group AB. But, group AB showed the larger vertical error than group FIX. 4. Group Fix-M showed smallest vertical and horizontal error.