• The KIPS Transactions:PartC
• /
• v.8C no.2
• /
• pp.141-154
• /
• 2001

MOBAS는 규칙적인 모듈로 구성되어 있어 확장이 용이하며, VLSI 구현 시 고집적화 할 수 있고, 각 모듈간에 동기를 맞추기 쉬울 뿐 아니라, 단일 종류의 칩으로 중앙 스위치 구조를 구성할 수 있다. Modified MOBAS(Multicast Output Buffered ATM Switch)는 MOBAS와 유사한 구조를 가지지만 스위치 모듈(SM : Switch Module)의 구조에서 차이를 보이며 적은 스위치소자(SWE : Switch Element)를 사용한다. 위성 통신에서 스위치의 크기뿐 아니라 고장감내 특성도 스위치를 디자인하는데 필요한 중요한 요소이다. 본 논문에서는 Modified MOBAS의 고장 특성을 분석하고 이에 적합한 Detection 기법 및 Location 기법을 제안하였다. 또한 스위치 모듈구조를 변형하여 Modified MOBAS에 비해 약간의 스위치 소자를 더 사용하지만 MOBAS에 비해서는 적은 스위치 소자를 사용할 뿐 아니라, MOBAS와 같이 단일 고장 하에서 성능의 저하가 거의 없다.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.169-172
• /
• 2006

This paper presents the single-stage High Power Factor AC/DC Two-Switch Forward Converter (TSFC). Recently, due to growing concern about the harmonic pollution of power distribution systems and the adoption of standards such as ICE 61000-3-2 and IEEE 519, There is a need to reduce the harmonic contents of AC line currents of power supplies. This research proposed the single-stage two switch forward circuit for low voltage and high current output. The principle of operation, feature and design considerations are illustrated and verified through the simulation with a 200W(5V, 40A) 200kHz MOSFET based experimental circuit.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1829-1834
• /
• 2008

An optical switch/modulator is designed and the light propagating characteristics is analyzed by the simplified BPM. The distinctive feature of the switch/modulator is that all the waveguide branches are designed to be single-mode. Principle of the device is based on the coupled mode theory in the Y-junction interconnecting waveguide. In spite of all the waveguides are designed to be single-mode, adjusting the interconnecting waveguide length of the device, the same characteristics as existing device up to date is obtainable. Numerical results show that the switching characteristics periodically depends on the interconnecting waveguide length with a spatial of about 150${\mu}m$ in the Ti:LiNbO3 step index waveguide. The concept of design would be utilized effectively in fabricating the monolithic high density of optical integrated circuit.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1157-1165
• /
• 2014

The T-type topology is a three-level topology that has an advantage in terms of its number of switching device and its efficiency when compared to the neutral-point clamped (NPC)-type topology. With the recent increase in the usage of the T-type topology, the interest in its reliability has also increased. Therefore, a tolerance control for a T-type rectifier is necessary to improve the reliability of applications when an open-switch fault occurs. NPC-type rectifiers cannot eliminate input current distortion completely. However, the T-type rectifier is able to restore distorted current. In this paper, a tolerance control for the $S_{x2}$ and $S_{x3}$ open-switch faults of a T-type rectifier is proposed where it is advantageous in terms of efficiency when compared with other tolerance controls. The performance of the proposed tolerance control is verified through simulation and experimental results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.4
• /
• pp.237-245
• /
• 2002

A new type of RF MEMS switch for low voltage actuation, high broadband application and high power capability is presented. Mechanical and electromagnetic simulations of this new RF MEMS switch type are shown and the fabrication process and measurement results are given. The switching element consists of a cantilever which is fixed by a suspension spring to the ground of the coplanar line. The closing voltage is 16V. The switches exhibit low insertion loss (<0.85dB@30GHz) with good isolation (>22dB@30GHz).

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.870-873
• /
• 2009

본 연구에서는 미세 무광부식 패턴을 갖는 HD Switch Panel 부품을 설계하고 금형을 제작하였다. 이를 위하여 사출성형 Simulation(CAE)을 이용하여 사출성형 공정의 문제점과 부품의 변형량을 예측 하였다. 또한 금형표면의 가열온도와 실제 금형온도의 비교함으로써 공정변수 조절을 통한 사출성형 조건의 최적화를 달성할 수 있었다. 한편, 순간금형표면가열을 이용한 성형기술인 E-MOLD를 적용하여 자동차 내장부품용 HD Switch Panel을 제작하였고, 전자현미경과 원자현미경을 이용한 표면 평가를 통하여 무광부식 패턴의 전사율 향상으로 인한 무광 특성이 향상됨(2.5이상$\rightarrow$1.5~1.7)을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.792-794
• /
• 2000

This paper describes the design and the analysis of electromagnetic system of Magnetic Switch using 2D parametric finite element method(EM-Pulse). Magnetic Switch is electrical equipment, which is widely used for switching on/off motors in industrial field. The transient state is simulated in order to calculate the response time of Magnetic Switch. The simulation is based upon a step-by-step integration of the electric circuit equations and the core movement. The contactor uses a permanent magnet for maintaining the closed state. The presented solution takes account of non-linear magnetic material property and spring force controlled by core position. The dynamic response of Magnetic Switch predicted by the simulation agrees closely with the required condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.271-275
• /
• 2006

In STP, network performance differs depending on topology configuration. Therefore, we need to configure right topology for the optimal efficiency of networking. This paper suggest the optimal topology configuration for efficient networking between ethernet switchs. It finds out the best topology configuration by calculation mathematical model which uses transmission time between root switch and other switchs in the same domain. And it also analysed performance difference on locations of root switch. Through the performance analysis, we could conclude that placing the root switch in the center is the most efficient.

• Proceedings of the Korea Contents Association Conference
• /
• 2018.05a
• /
• pp.317-318
• /
• 2018

유전자는 alternative splicing으로 환경에 맞는 전사체를 발현함으로써 생명체의 복잡성을 야기한다. 하지만 대부분의 유전자는 dominant한 isoform 하나만이 주로 발현되며 그 외는 극히 미약하게 발현을 한다. 정상 대비 암조직에서 dominant하게 발현되는 isoform은 암의 생성과 발달에 영향을 끼칠 것으로 보인다. 이에 정상과 비교하여 암 특이적인 isoform, 즉 isoform switch가 일어나는 유전자를 찾기 위해 TCGA의 RNA-seq 데이터를 다운로드하여 isoform switch가 일어나는 유전자를 뽑았다. 12 조직에 대한 2,925 유전자는 기능분석을 통해 암과 밀접하게 연관되어 있음을 알 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1026-1029
• /
• 1993

Inherent speed-torque performance of Switched Reluctance Motor is similar to that of series wound DC motor. Thus, the speed of the motor is extremely regulated according to load torque. For the purpose of controlling the speed and torque of SRM it is necessary to change the applied DC link voltage or the switch-ON and switch-OFF angles which control the phase current of the motor. This paper describes speed-torque characteristics of an integral horse power Switched Reluctance Motor by adjusting the switch-ON and switch-OFF angles. Speed at rated load torque can be regulated by adjusting the switching angles and the control scheme is applied to 2kW, 3 phase, 6/4 SRM.