• Economic and Environmental Geology
• /
• v.44 no.1
• /
• pp.59-70
• /
• 2011

The surface sediment distribution in a tidal flat in 2001 was compared with that of 2008 using high spatial resolution remote sensing images and a GIS-based analysis. Maps of the surface sedimentary facies for each time frame were induced by an IKONOS data acquired in February, 2001 and a KOMPSAT-2 data acquired in April, 2008 using an object-based classification method. The area ratio of each surface sedimentary facies were estimated, and the results were compared each other for deducing the change in the sedimentary facies during the time interval. The result showed that the percentage of grains larger than very fine sand (0.0625 mm) has increased considerably since the early 2000s in the Hwangdo tidal flat. Mud flat facies has decreased 5.81 % in the late 2000s compared with the early 2000s. However, mixed flat and sand flat have increased 4.46% and 2.14%, respectively. A field campaign also supported the result. This study showed that the monitoring of changes in the surface sedimentary facies in the tidal flat is possible through a GIS-based analysis using high spatial resolution remote sensing images.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.3
• /
• pp.171-181
• /
• 2017

Two-phase cross flow exists in many shell-and-tube heat exchangers such as condensers, evaporators, and nuclear steam generators. The drag force acting on a tube bundle subjected to air/water flow is evaluated experimentally. The cylinders subjected to two-phase flow are arranged in a normal square array. The ratio of pitch to diameter is 1.35, and the diameter of the cylinder is 18 mm. The drag force along the flow direction on the tube bundles is measured to calculate the drag coefficient and the two-phase damping ratio. The two-phase damping ratios, given by the analytical model for a homogeneous two-phase flow, are compared with experimental results. The correlation factor between the frictional pressure drop and the hydraulic drag coefficient is determined from the experimental results. The factor is used to calculate the drag force analytically. It is found that with an increase in the mass flux, the drag force, and the drag coefficients are close to the results given by the homogeneous model. The result shows that the damping ratio can be calculated using the homogeneous model for bubbly flow of sufficiently large mass flux.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.785-789
• /
• 2005

$TiO_2$ powders with rutile and brookite phases were synthesized through homogeneous precipitation of the aqueous $TiOCl_2$ solution, prepared from $TiCl_4$ and HCl solution, and their properties were characterized. Based on the analytical results appropriate molar ratios of ${Cl^-}_{total}:Ti^{+4}$ in precipitating solution for synthesis of pure rutile phase and a mixture of rutile and brookite phases were proposed. The volumetric proportion of brookite increased with increasing HCl concentration under a typical condition obtaining mixed phase of rutile and brookite. The brookite phase in the mixture was transformed to anatase phase by heat treatment at about $800^{\circ}C{\sim}850^{\circ}C$, and finally converted to rutile phase at $1000^{\circ}C$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.167.2-167.2
• /
• 2017

수지상 구리분말은 하나의 상(statue)이 복수의 접점(contact point)를 제공하며 표면적이 넓은 구조적인 특징으로 인해 발열기판 전도성 페이스트 등 다양한 전기 전가 분야에 활용되어왔다. 때문에 본 연구에서는 전해도금방법으로 수지상 구리분말이 형성될 때 첨가제가 수지상의 형상에 어떠한 영향을 미치는지 분석하였다. 첨가제는 PEG, JGB를 사용하여 농도별로 실험을 진행하였다. SEM 이미지 분석결과 첨가제가 추가함에 따라 수지상이 미세해지며 첨가제의 농도가 증가함에 따라 DAS(dendrite arm spacing)값이 감소하여 표면적이 증가하였다. BET 비표면적 분석결과 PEG($1.882m^2/g$)보다 JGB($2.119m^2/g$)에서 표면적을 넓히는 효과가 뛰어났다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.393-394
• /
• 2017

유도전동기는 속도 제어가 어렵기 때문에 이를 위한 고가의 벡터제어 인버터가 널리 사용되어 왔다. 이 때문에 최근에는 이를 저가화하기 위하여 제어 알고리즘이 단순하고 구현이 용이한 직접토크제어 방식에 대한 연구가 이루어지고 있다. 한편으로 소용량의 저전력 응용 분야에서는 기계적으로 구조가 단순하고 가격이 저렴한 2상 유도전동기를 적용하려는 노력이 활발해지고 있다. 2상 유도전동기용 인버터의 대표적인 토폴로지는 3상 IPM 소자를 그대로 이용할 수 있는 3레그형이다. 그러나, 3레그형 인버터에서는 출력 전압 벡터가 비대칭 육각형의 형태로 나타나므로 2상 유도전동기에 이러한 직접토크제어 방식을 적용하면 전동기의 발생 토크에 리플이 증가하는 문제가 있다. 본 논문에서는 3레그형 인버터를 사용하는 2상 유도전동기에 직접토크제어 방식을 적용하고 이때 문제가 되는 전동기의 토크 리플을 저감하는 방법에 관하여 연구하였으며, 이것의 유효성은 시뮬레이션을 통하여 유효성을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.479-480
• /
• 2015

본 논문에서는 2상 유도전동기용 벡터제어 인버터를 적용한 엘리베이터 도어 컨트롤 시스템을 제안하였다. 현재까지 엘리베이터 도어 컨트롤러에는 속도제어가 용이한 3상 유도전동기를 주로 사용해 왔으나, 최근에는 2상 유도전동기도 벡터제어를 사용한 속도제어가 가능하게 되어 저전력 응용분야에서는 3상 유도전동기에 비하여 경쟁력을 갖게 되었다. 본 논문에서는 360[W]급의 2상 유도전동기용 벡터제어 인버터를 엘리베이터 도어 컨트롤러에 적용하여 충분한 제어 성능을 가지면서 종래의 제품에 비하여 원가를 낮추어 시스템을 구현하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.3
• /
• pp.230-238
• /
• 2003

In this paper, Inverter drives adopting 2 phase space vector SRP-PWM (Separately Randomized Pulse Position PWM) with fixed switching frequency is proposed. The proposed 2 phase space vector SRP-PWM scheme is based on the 3 phase SRP-PWM. In the proposed SRP-PWM scheme, each of two phase pulses is located randomly in each switching interval. The experimental results show that the voltage and acoustic noise harmonics are spread to a wide band area. Also, the performance of the proposed 2 phase SRP-PWM and the conventional center aligned SVM are compared to each other. In result, the speed response is nearly similar to each other from the viewpoint of the v/f constant control.

• Food Science of Animal Resources
• /
• v.21 no.4
• /
• pp.329-336
• /
• 2001

The experiments were carried out to investigate the aging effect between loin muscles from Hanwoo and Helstein. Two kinds of loin samples were prepared from the carcasses of grade B2 from Hanwoo and D from Holstein. The carcasses were chilled for 24 hours after slaughter. The carcasses was obtained by chilling the loin fort 1 day after wrapping it. On the other hand. was obtained divided by 500g and stored at 2$^{\circ}C$ for 11 days after air packing. In the case of fresh beef pH and lactic acid of grade B2 were lower than that of grade D. Hardness and chewiness of grade B2 were lower than that of grade D, but myofibrillar fragmentation index(MFI) of glade B2 were higher than that of grade D. Total concentrations of free amino acid of grade B2 were higher than those of D. The contents of monounsaturated fatty acid of grade B2 was lower than grade D, and monosaturated fatty acid/saturated fatty acid(MUFA/SFA) of grade B2 were higher than grade D. The contents of nonprotein nitrogen of the aged beef was higher than the fresh beef, and beef of grade B2 was higher than that of grade D. In case of aging beef. cooking loss of grade B2 was lower than grade D.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.132-136
• /
• 2001

Iron- silicide has been produced by mechanical alloying process and consolidated by hot pressing. As-consolidated iron silicides were consisted of $\beta$-FeSi$_2$ phase, and untransformed mixture of $\alpha$-$Fe_2Si_5$ and $\varepsilon$-FeSi phases. Isothermal annealing has been carried out to induce the transformation to a thermoelectric semiconducting $\beta$-$FeSi_2$ phase. The condition for $\beta$-FeSi$_2$ transformation was investigated by utilizing DTA, SEM, TEM and XRD analysis. The phase transformation was shown to be taken place by a vacuum isothermal annealing at $830^{\circ}C$ for 24 hours. The mechanical and thermoelectric properties of $\beta$-FeSi$_2$ materials before and after isothermal annealing were characterized in this study.

• Geophysics and Geophysical Exploration
• /
• v.16 no.3
• /
• pp.145-153
• /
• 2013

High-resolution chirp profiles were analyzed to investigate the echo types of near-surface sediments in the Yellow Sea off the Baegryeong Island. On the basis of seafloor morphology and subbottom echo characters, 7 echo types were identified. Flat seafloor with no internal reflectors or moderately to well-developed subbottom reflectors (echo type 1-1 and 1-2) is mainly distributed in the southern part of the study area. Flat seafloor with superposed wavy bedforms (echo type 1-3) is also distributed in the middle part. Mounded seafloor with either smooth surface or superposed bedforms (echo type 2-1, 2-2, and 2-3) occurs in the middle part of the study area. Irregular and eroded seafloor with no subbottom reflectors (echo type 3-1) is present in the northern part of the study area off the Baegryeong Island. According to the distribution pattern and sedimentary facies of echo types, depositional environments can be divided into three distinctive areas: (1) active erosional zone due to strong tidal currents in the northern part; (2) formation of tidal sand ridges in response to tidal currents associated with sea-level rise distributed in the middle part; and (3) transgressive sand sheets in the southern part. Such a depositional pattern, including 7 echo types, in this area reflects depositional process related to the sea-level rise and strong tidal currents during the Holocene transgression.