• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.61-74
• /
• 2005

This study is to investigate the effects of driving anger and traffic congestion on drivers' behaviors. Driving anger is the propensity to become angry while driving, and people differ in the tendency to get angry when encountering frustration and provocation on the road. Individual differences of the propensity contribute to anger on the road and aggressive driving leading traffic vaiolations and accidents. In the experiment three traffic conditions (an open road condition, a bumper-to-bumper traffic condition and a being stuck behind a slower driver condition) were simulated and driving behaviors were collected with RTSA-DS(Road Traffic Safety Authority-Driving Simulator). The results were as follows: Most of high anger drives drove at higher speeds in an open road condition, and in the bumper-to-bumper condition they drove faster and had an higher crash rate, which suggests they did aggressive driving, and risky and unsafe behaviors.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.90-97
• /
• 2009

One of the most important factors that affect a person's risk of injury in a motor vehicle crash is the age of the person. This study investigates the characteristics of crash injuries among young, middle-aged and older drivers and occupants. Based on the comprehensive claim data from automobile insurance from 2000 to 2007, this study examines in great detail the drivers and occupants injury body regions and severity by age in car-to-car frontal crashes. It has been shown that elderly drivers and occupants suffer more injuries at a chest region compared to the middle-aged group. This research calls attention to the need for design to make vehicles more protective for older drivers in car-to car frontal crashes.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.43-45
• /
• 2008

박막 제작공정은 반도체 제작 공정, 고정밀도의 하드디스크 및 레이저 디스크 기술, LCD/P에 DML평판 디스크 플레이어 제작 공정에 있어 중요한 기술이다. 더욱이, 이 공정은 이동 전화 커버의 증착 및 전자 차폐의 일반기술, 램프의 반사판, 화장품 용기, 몇몇 상품에 있어 카메라 렌즈의 광학 표면 코팅과 코팅 필름 제작에 사용된다. 본 연구의 주요목적은 반도체 제작 공정과 많은 산업 분야에서 기본 재료로 사용되는 전영저항의 개발에 있다. 개발 공정은 다음과 같다. 전자빔이 최상의 진공 분위기에서 텅스텐 필라멘트의 열에 의해 방출된다. 그때 전자는 높은 전압에서 가속화된다. 전자들은 반대 재료에 충돌되고, 반대편 재료는 발생 열에 의해 코팅된다. 1차년도 연구목적은 고성능 전열 저항체 개발을 위한 지름 당 필라멘트 선의 기계적 특성을 조사하고 CAE 해석을 수행하며, 2차 년도에는 대량 생산 라인 구축을 위한 자동검사 라인 개발에 초점이 맞추어져 있다. 만일, 본 연구를 통해 전열 저항체가 개발된다면, 그 제품은 고효율, 외국제품 대비 가격 경쟁력을 가지므로 제품 경쟁력을 가질 수 있을 것으로 생각된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.132-132
• /
• 1999

카본 박막은 내마모성, 내산성, 윤활성 및 높은 경도를 가지고 있어, 경질 박막 및 기능성 박막으로 주목을 받고 있으며 그 응용 분야가 매우 크다. 본 연구는 전자빔(Electron Beam)을 카본 grain을 증발시킴과 동시에 아르곤 보조 이온빔을 조사시켜 이온에너지에 따른 박막의 물성변화를 관찰하였다. 특히 본 연구에서 이용한 이온빔 증착 장치의 장점은 이온 충돌 에너지의 조절이 가능하다는 것이다. 카본 박막의 제조는 이온빔이 증착된 고진공 증착 장치를 이용하였고 이원빔원으로는 Oxford Applied Research 사의 RF 방전형 이온빔을 이용하였다. 배기장치는 유회전펌프와 터보펌프를 사용하였다. 기판은 홀더에 장착하기 전에 전처리를 거친 후 용기 내에서 이온빔에 의해 2차 청정을 하였다. 빔전압이 500V, 빔 전류는 4mA/cm2 및 RF power를 400W로 하여 기판 청정을 거친 후 전자빔을 이용하여 흑연을 증발시켜 박막을 제조하였다. 이때 이온빔 전압을 100~500V, RF power를 400~550W 으로 조절하였다. 카본 grain을 Si 및 Slide Glass 기판위에 1$\AA$/sec의 증착율을 유지하면서 증착하였다. 카본 박막의 박막은 평균두께는 0.3~0.4$\mu\textrm{m}$이며 SEM을 이용하여 단면을 관찰하였다. 라만 분광분석을 통하여 비정질 카본 박막의 결합특성을 조사하였고 scratch tester를 이용하여 박막의 밀착력을 관찰하였다. 그리고 카본 박막의 전도도 특성을 알고자 비저항을 측정하였으며, 박막의 성분 분석을 위한 AES 분석을 하였다. 1)AES 결과:표면에서와 박막 내부에서는 불순물인 산소나 질소의 함량이 거의 존재하지 않음을 관찰하였다. 2)경도:1,000~1,400kg/mm2 3)라만 분광 분석:300V의 이온 에너지를 분기로 박막 구조의 변화에 의한 스팩트럼의 변화를 보였다. 4)비저항:10-2~10-1$\Omega$.cm

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.545-550
• /
• 2023

A pretensioner is a safety device that protects occupants by pulling the seat belt in the event of a vehicle collision. However, since the pretensioner is driven by a explosive method, it is necessary to replace not only the gas generator but also all connecting parts including the manifold after an accident. Therefore, in this paper, we propose an elastic force-based pretensioner that can be used safely and semi-permanently. After analyzing the operating mechanism of the existing pretensioner from a thermodynamic/dynamic point of view, the spring stiffness that can be deployed within an appropriate operating time was determined by converting the gas explosion energy into elastic energy. In addition, the coil spring shape that satisfies the elastic stiffness was designed in consideration of the vehicle interior installation standard. Finally, the operating performance of the pretensioner driven by elastic force was verified through fabrication.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.187-192
• /
• 2015

In general, design of urban intersections are fundamentally different from rural intersections, but current urban intersection design has been appled to rural standards. This study has suggested the design standard for urban intersection grades based on the existing literature, field investigating and comparative analysis. Moreover, this study analyzes and compares the differences between urban and rural intersections, and intersections have been derived by appropriate design standards after reviewing the domestic and international grades design criteria. Site survey was performed to validate the derived design criteria by analyzing statistically to establish the design standards. Results were produced for the intersection portion grade standards by comparing the number of instructions which produced appropriate slope degree from 2.5% to 3% in normal condition and slope can be extended to 5% in some critical cases. In-situ investigation was performed to validate the produced data where slope was found from 0.0~8.6%. Additional data of accident analysis were also collected for the validation of the suggested data and correlation analysis was performed using the SPSS tool. Data were analyzed statistically using 95% significance level for vehicle-to-vehicle collided, head-on collision accident rates, where accident rates significantly correlated with the grade. Therefore, appropriate grade at the intersection should be designed and applied in order to reduce the number of accidents at the intersection. Finally, appropriate grades for urban intersections are suggested from 1-3% for normal cases and grades could extend up to 5% for unavoidable cases where extra care must be taken when designing.

• Economic and Environmental Geology
• /
• v.40 no.4
• /
• pp.473-490
• /
• 2007

Strata of the Kachi-1 well, Kunsan Basin, offshore western Korea, were analyzed by using integrated stratigraphy approach. As a result, five distinct unconformity-bounded units are recognized in the well: Triassic, Late Jurassic-Early Cretaceous, Early Cretaceous, Late Cretaceous, and Middle Miocene units. Each unit represents a tectono-stratigraphic unit that provides time-sliced information on basin-forming tectonics, sedimentation, and basin-modifying tectonics of the Kunsan Basin. In the late Late Jurassic, development of second- or third-order wrench faults along the Tan-Lu fault system probably initiated a series of small-scale strike-slip extensional basins. Continued sinistral movement of these wrench faults until the Late Cretaceous caused a mega-shear in the basin, forming a large-scale pull-apart basin. However, in the Early Tertiary, the Indian Plate began to collide with the Eurasian Plate, forming a mega-suture zone. This orogenic event, namely the Himalayan Orogeny, continued by late Eocene and was probably responsible for initiation of right-lateral motion of the Tan-Lu fault system. The right-lateral strike-slip movement of the Tan-Lu fault caused the tectonic inversion of the Kunsan Basin. Thus, the late Eocene to Oligocene was the main period of severe tectonic modification of the basin. After the Oligocene, the Kunsan Basin has maintained thermal subsidence up to the present with short periods of marine transgressions extending into the land part of the present basin.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.40-47
• /
• 1999

We have established a pulsed low-energy large-aIXTture electron beam(LELAEB) generation system with an energy of 2OO[keV], current of 1[A], pulse repetition rate of 200[Hz], and several tens of ${\mu}s$ pulse width. The system is characterized by a cold cathode that is simpler than the hot cathode. Electron beam does not need to be scanned over target objects because of large beam aIXTture of $300[\textrm{cm}^2]$. Electron source is secondary electrons that are generated when the ions from the glow discharge collide on the cathode surface. In this paper, We report about the design and manufacture of LELAEB generation system based on the theoretical analysis in order to study lXlssibility of increasing the efficiency of IELAEB accelerator. We also report on the possibility of large aperture beam current generation and the current density uniformity based on the experiIrental results.esults.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.2
• /
• pp.97-112
• /
• 1978

The rule 15, 16 and 17 of International Regulations for Preventing collisions at Sea direct actions to avoid collision when two power-driven vessels are crossing. But these rules do not present the safety minimum approaching distances outside which a give- way vessel deeps out of the way of a stand-on vessel. In this paper, the author analyzed the ship's collision avoiding actions from a viewpoint of ship kinematics as the method to calculate this distance. The author worked out mathematic formulas for calculating the safety minimum approaching distances outside which the give-way vessel takes the actions to avoid collisions in accordance with the cross angles of the crossing vessels' courses. Figuring out actually the values of maneuvering indices of the M. S. Koan Ack San (GT: 224tons), the training ship of the National Fisheries University of Busan and the M. S. Golden Clover (GT: 101, 235tons) of the Eastern Shipping Co., Ltd. through their Z test, the author applied these values to the calculating formulas and calculated the safety minimum approaching distances. The results of calculations are as follows; 1. The greatest distance is to be kept by the give-way vessel to avoid collision when the cross angle of courses is 90$^{\circ}$ or near it. In such case the safety minimum approaching distance of a small vessel must be more than 5 times of her own length and that of a large vessel more than 11 times of her own length. 2. Collision danger is greater when crossing angle is obtuse than in an acute angle, therefore greater distance is to be kept by the give-way vessel to avoid collision in the case of the obtuse angle. 3. The actions to be taken to avoid collisions by the give-way vessel in Rule 16 and by the stand-on vessel in Rule 17(a)(ii) of International Regulations for Preventing Collisions at Sea, must be done outside the above safety minimum approaching distance. When inevitably such actions are to be taken within the safety minimum approaching distance, they should be accompanied with engine motions.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1431_1432
• /
• 2009

본 연구에서는 전자빔에 의해 생성되는 저온 플라즈마의 특성을 시뮬레이션을 통해 알아보았다. 전자빔 소스에서 전자를 생성하여 가속 전압을 인가하여 챔버로 보내고, 챔버 속의 Argon 중성 기체와 전자가 충돌하여 2차 방전을 일으킴으로써 저온 플라즈마가 생성된다. 이 때 중성기체의 압력과 가속전압의 변화에 따라서 플라즈마 밀도와 온도가 변하는데, 어떠한 특성을 가지는지 알아보기 위해 Particle-In-Cell(PIC) 시뮬레이션을 이용하였다. 챔버 내부에서 전자빔과 중성기체에 의한 변화를 관측했고, 이 때 전자빔 소스에서 Negative Acceleration Voltage는 10V~40V, 챔버 내부의 Argon 중성 기체의 압력은 1mTorr~20mTorr 조건하에서 시뮬레이션을 수행하였다. Electron Energy Distribution function (EEDF)을 관찰한 결과, 가속전압이 높을수록 낮은 에너지를 가지는 전자의 수가 증가하여 전자 밀도는 증가하며, 가스 압력이 높을수록 EEDF의 기울기가 커지면서 전자온도는 감소함을 알 수 있었다.