• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.453-460
• /
• 2013

The surface roughness and heat transfer enhancement devices are known to increase the performance of a flat plate soar collector. This study includes the experiments on the effect of the several heat transfer enhancement devices inserted in duct to simulate the flat-plate solar collector. Experiment was basically at a constant heat flux on the upper duct wall. Inserted heat transfer enhancement devices are Chamfered rib $10^{\circ}$, Chamfered rib $20^{\circ}$, Rib & Groove and Rib & Dimple. Reynolds number is in the range of 2,300 to 22,000 which corresponds to turbulent regime. With the heat transfer enhancement devices, heat transfer would increase by the secondary flow and the increase of the heat transfer area. Pressure drop also increases with the insertion of the enhancement devices. Rib & Dimple model is the best in heat transfer enhancement, however, Chamfered rib $10^{\circ}$ model is the lowest in the pressure drop. Considering the heat transfer enhancement simultaneously with low pressure drop increase, performance factor was the best for the Chamfered rib $10^{\circ}$.

• Journal of Animal Environmental Science
• /
• v.9 no.2
• /
• pp.103-112
• /
• 2003

In this study, the distributions of internal climates such as air temperature, humidity, dust, ammonia gas, and air velocity were systematically measured at a mechanically ventilated broiler houses during summer season, with local weather data. The analysis was focused on the suitability, stability, and uniformity of internal climate, resulting in serious stress on chickens and decrease of productivity In the mechanically ventilated broiler house, the difference between measured and recommended air temperatures(suitability) was 10.4C in maximum during the summer time. The difference of air temperature in the house between day and night was $8.7^{\circ}C$ in maximum. And maximal hourly range of internal air temperature at 0.4m height from the floor was $3.7^{\circ}C$ suggesting it maintained thermal uniformity in the broiler house. The $NH_3$ and dust concentrations were pretty low because ventilation was fully performed. The air speed at chicken location was measured 2.2m/s and 1.7m/s, respectively without and with chicken existence.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.275-283
• /
• 2013

An injector that uses methane gas ($CH_4$) and liquid oxygen ($LO_x$) as propellants was designed to verify the combustion characteristics of an engine that uses methane, which is one of the next-generation propellants. A swirl/shear coaxial-type injector was used, and flow analysis was performed using Fluent to determine the main design parameters of the injector. A hydraulic test was performed to understand the atomization and spray pattern characteristics of the injector. Next, a combustion test was performed at the design point to understand the ignition and combustion stability. Additional combustion tests were performed according to the O/F ratio to investigate the combustion characteristics and stabilities using the characteristic exhaust velocity ($C^*$) and fluctuation of the chamber pressure. The experimental results showed that the combustion efficiency was greater than 90%, and the pressure fluctuation was lower than 2% under all conditions.

• Korean Journal of Ichthyology
• /
• v.26 no.1
• /
• pp.50-69
• /
• 2014

Freshwater fish fauna and community structure were investigated at thirty seven stations in the Yeong river, Nakdong river system, Korea from March to October 2013. During the surveyed period thirty nine species and two types belonging to thirteen families were collected. In this collection fishes of Cyprinidae were most numerous possessing 61.0% of all. There were seventeen Korean endemic species including Acheilognathus koreensis, two endangered species such as Koreocobitis naktongensis and Microphysogobio koreensis and two exotic species such as Oncorhynchus mykiss and Micropterus salmoides. Fish species transferred from other native rivers were three species such as Opsariichthys uncirostris amurensis, Pseudobagrus koreanus and Hypomesus nipponensis. Dominant species based on the number of individuals was Zacco koreanus NS (23.24%) and sub-dominant species were Z. koreanus NE (12.72%) and Z. platypus R (12.35%). The community analysis revealed that the structure of fish community in the Yeong river was very stable and diverse in having diversity 1.134, evenness 0.703, dominance 0.110 and species richness 4.348. Fish community was divided into four groups based on similarity indices among surveyed stations such as upper reach, mid-upper reach, middle reach and lower reach group.

• Horticultural Science & Technology
• /
• v.32 no.1
• /
• pp.41-45
• /
• 2014

This study was conducted to investigate the effects of crown numbers on growth and yield of ever-bearing strawberry (Fragaria ${\times}$ ananassa Duch.) 'Goha' cultivar. Strawberry seedlings were planted with $55{\times}30cm$ distance on April 29, and the randomized block experimental was designed by putting the crown numbers by 1, 3, 5 and crown-unremoved as the control. At the early growth stage, as the numbers of crown decreased, the size of leaf became larger and inflorescence diameter became thicker. Plant height became higher as the number of crown increased at the final harvesting time. Fresh weight of crown-unremoved plants was 118 g, showing 77.2 g higher than that of plants with one crown. Numbers of the developed inflorescence of plants with five crowns and crown-unremoved was 20.1, whereas 6.8 of plants with one crown, resulted in 13.3 more crowns. However, crown number did not significantly affect the fruit quality. As the crown number increased, the average fruit weight was lighter and the marketable fruit rate was shown to decrease significantly. The marketable yield of crown-unremoved plants was $17,372kg{\cdot}ha^{-1}$, showing 68% higher than plants with one crown. Therefore, crown management without thinning crowns was recommended and inflorescence thickness less than 3 mm should be removed for successful production of ever-bearing strawberry 'Goha' cultivar during summer season.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.147-157
• /
• 2018

With the rapid development of the 4th industrial revolution, the large-sized facilities of agriculture have been developed with high-technologies. However, it is difficult to maintain the optimum environment in large-sized facilities. Although it is essential to control micro-climate properly in large-sized facilities, there are a lot of problems to utilize high-technologies and equipment because of insufficient education for farmers. Most farms have limitations to access to their farm because of prevention of epidemics, exposure of management know-how, and so on. Especially, it is difficult to understand internal environmental factors (airflow, temperature, humidity, etc.) for farmers because these factors are invisible. Recently, Virtual reality technology which allows users to experience various phenomena directly is attracting attention. Virtual reality is very useful technology to visualize airflow and temperature distribution and so on. However, there is no cases applied this technology to agricultural facilities. In this study, research trends of virtual reality in various fields were investigated. In particular, the limitation and possibility of virtual reality technology were analyzed for educating farmers. Finally, the development of virtual reality contents for smart-farm facility were suggested.

• Composites Research
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2000

During the compression molding process of the continuous fiber-reinforced polymeric composites, two main problems such as fiber-matrix separation and fiber orientation are produced by the difference of flow velocity. Molded parts are lead to be nonhomogeneous and anisotropic. As the mechanical property of the products are dependent on the separation and orientation, it is important to research the fiber mat structure and molding condition. If the fiber mat structure is changed by the increment of needling, the separation decreases and after compression molding the orientation is easily aligned. As it were, the compression moldability is good. But the defects as tears, thin thickness are produced in the products. Therefore, it is important to clarify the moldability in relation to the usage of products and the expenses of produce on the actual process. Therefore we must make the measurement methods that can define the moldability of products. In this research, the effects of the fiber mat structure(NP = 0, 5, 10, 25, 50 punches/$cm^2$) and the mold geometry($r_p$ = 1, 25, 50 mm) on the moldability of products were discussed. We investigated the case of one-dimensional flow in order to obtain the degree of nonhomogeneity and the fiber orientation function. In result, we could gain the correlation coefficient of the continuous fiber-reinforced polymeric composites. Also we experimented on the cup-type compression molding which was appeared the wrinkle on the flange part by the complex stress condition in order to gain the degree of nonhomogeneity and area ratio. In result, the moldability of products was expressed as the correlation coefficient and area ratio.

• Journal of Animal Science and Technology
• /
• v.50 no.6
• /
• pp.799-806
• /
• 2008

This experiment was carried out to investigate the effect of feeding limestone to high and low Ca layer diets on laying performance and eggshell quality in laying hens. Five hundred and twenty-eight HyLine brown layer allotted to six treatments consisting of high and low Ca diets. Limestone added to two kinds of basal diet with 1, 2 and 3 fold compared to conventional diet. Egg production was not different regardless Ca level and amount of added limestone in overall periods. However, the increment of egg observed in high Ca diet and added 10g limestone group during later period. Ca and limestone intake were increased as increasing feeding limestone. Eggshell strength and thickness were improved in high Ca consumption group. It was concluded that feeding Ca sources to conventional diets was helpful improving eggshell quality and reducing feed cost per egg mass by increasing proportion of Ca intake.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.313-322
• /
• 2006

Among many modelling factors which consist of a screen, a form brings a child's psychological response, according to its being drawn and expressed shape, and would be defined as a visual descriptive method which transmits the relation between the subject and background by a story content and the circumstance and emotion of characters in the story. In this study, to analyze how an expressed form on a screen works to a child visually and psychologically, I, first have examined how differently a child's perception development and its experience to the form is come out by the age of a child, and have found that it influences on a child's originality and creativity development, visual and psychological thinking development, and the stimulation on dream and imagination. And I have examined each characteristic by discriminating the expressive style of the form into a reproductive, a simplified, an exaggerated and a distorted form expression, and by utilizing it as substantiative data through the 1st and 2nd stage, have analyzed responses and preferences according to a style of a child's expression form. In conclusion, I have considered that the analysis result through the substantiative study would be a help not only to the form expression which is based on an illustrator's personality and creativity, and also would be utilized in the effective expression method study and experiment of students who learns the illustration.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.150-163
• /
• 2015

Gasification technology is one of the representative next-generation fossil fuel utilization technologies, converting low grade fossil fuels such as coal, heavy residue oil, pet-coke into highly clean and efficient energy sources. Accordingly, related market demand for gasification technology is ever increasing steadily and rapidly. A few years ago, conventional pulverized coal utilization technology had an edge over the gasification technology but the most significant technical barrier of limited capacity and availability has been largely overcome nowadays. Futhermore, it will be more competitive in the future with the advancement of related technologies such as gas turbine, ion transfer membrane and so on. China has recently completed a commercialization-capable large-scale coal gasification technology for its domestic market expansion and foreign export, rapidly becoming a newcomer in the field and competing with existing US and EU technical leadership at comparable terms. Techno-economic aspect deserves intensive attention and steady R&D efforts need to continue in organized, considering that gasification technology is quite attractive combined with $CO_2$ capture process and coal to SNG plant is economically viable in Korea where natural gas is very expensive. In the present paper, recent technology development and commercialization trend of many leading companies with coal gasification expertise have been reviewed with significant portion of literature cited from the recently held '2014 Gasification Technology Conference'.