• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.742-749
• /
• 2009

The use of cone-beam computed tomography(CBCT) has been proposed for guiding the delivery of radiation therapy. A kilovoltage imaging system capable of radiography, fluoroscopy, and cone-beam computed tomography(CT) has been integrated with a medical linear accelerator. A standard clinical linear accelerator, operating in arc therapy mode, and an amorphous-silicon (a-Si) with an on-board electronic portal imager can be used to treat palliative patient and verify the patient's position prior to treatment. On-board CBCT images are used to generate patient geometric models to assist patient setup. The image data can also, potentially, be used for dose reconstruction in combination with the fluence maps from treatment plan. In this study, the accuracy of Hounsfield Units of CBCT images as well as the accuracy of dose calculations based on CBCT images of a phantom and compared the results with those of using CT simulator images. Phantom and patient studies were carried out to evaluate the achievable accuracy in using CBCT and CT stimulator for dose calculation. Relative electron density as a function of HU was obtained for both planning CT stimulator and CBCT using a Catphan-600 (The Phantom Laboratory, USA) calibration phantom. A clinical treatment planning system was employed for CT stimulator and CBCT based dose calculations and subsequent comparisons. The dosimetric consequence as the result of HU variation in CBCT was evaluated by comparing MU/cCy. The differences were about 2.7% (3-4MU/100cGy) in phantom and 2.5% (1-3MU/100cGy) in patients. The difference in HU values in Catphan was small. However, the magnitude of scatter and artifacts in CBCT images are affected by limitation of detector's FOV and patient's involuntary motions. CBCT images included scatters and artifacts due to In addition to guide the patient setup process, CBCT data acquired prior to the treatment be used to recalculate or verify the treatment plan based on the patient anatomy of the treatment area. And the CBCT has potential to become a very useful tool for on-line ART.)

• Childhood Kidney Diseases
• /
• v.4 no.1
• /
• pp.33-39
• /
• 2000

Purpose: Our study was designed to investigate the association of MHC Class II (DR, DQ) allele with IgA nephropathy and its significance as a prognostic factor for progression to ESRD Material and Methods: 69 children with IgA nephropathy with normal renal function(serum creatinine $\leq$ 1.5mg/dL) was classified as group A and 70 patients who received renal transplantation due to IgA nephropathy were selected as group B. The HLA-DQB1 and HLA-DRB1 alleles were studied by polymerase chain reaction using sequence specific primers. We have compared the difference in alleles between these two groups and with normal control and also examined any possible effect of the MHC class II genes on the histopathological severity and prognosis of IgAN. Results: Mean age was $8.8{\pm}2.9$ years in group A and $35.0{\pm}15.5$ years in group B. Male to female ratio was 2.8:1 in group A and 2.5:1 in group B. There was a significantly higher frequency of HLA-$DQB1^*03\;and\;DQB1^*05$ in Group B. The frequency of HLA-$DQB1^*0302\;and\;^*05031$ allele had increasing tendency in Group B(P<0.05). HLA-$DRB1^*03\;and\;^*05$ were more common in Group B(P<0.05). HLA-$DRB1^*04$ allele was the most common DR alleles in both group, but there was no statistical significance. There were no significant correlation with MHC class 13 genes on the hjstopathological severity in Group A. Conclusion: In conclusion, $HLA-DQB1^*0302\;and\;HLA-DQB1^*05031 $ allele seemed to be more common in transplanted patients compared to group with normal renal function suggesting that this allele is associated with poor prognosis in IgAN. However larger studies and follow up are required to confirm this due to uncharacterized heterogeneity in etiopathogenesis of IgA nephropathy and possibly one or more than one gene may exert influence in determining susceptibility to the diseases.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1159-1166
• /
• 2009

The use of cone-beam computed tomography(CBCT) has been proposed for guiding the delivery of radiation therapy. A kilovoltage imaging system capable of radiography, fluoroscopy, and cone-beam computed tomography(CT) has been integrated with a medical linear accelerator. A standard clinical linear accelerator, operating in arc therapy mode, and an amorphous-silicon (a-Si) with an on-board electronic portal imager can be used to treat palliative patient and verify the patient's position prior to treatment. On-board CBCT images are used to generate patient geometric models to assist patient setup. The image data can also, potentially, be used for dose reconstruction in combination with the fluence maps from treatment plan. In this study, the accuracy of Hounsfield Units of CBCT images as well as the accuracy of dose calculations based on CBCT images of a phantom and compared the results with those of using CT simulator images. Phantom and patient studies were carried out to evaluate the achievable accuracy in using CBCT and CT stimulator for dose calculation. Relative electron density as a function of HU was obtained for both planning CT stimulator and CBCT using a Catphan-600 (The Phantom Laboratory, USA) calibration phantom. A clinical treatment planning system was employed for CT stimulator and CBCT based dose calculations and subsequent comparisons. The dosimetric consequence as the result of HU variation in CBCT was evaluated by comparing MU/cCy. The differences were about 2.7% (3-4MU/100cGy) in phantom and 2.5% (1-3MU/100cGy) in patients. The difference in HU values in Catphan was small. However, the magnitude of scatter and artifacts in CBCT images are affected by limitation of detector's FOV and patient's involuntary motions. CBCT images included scatters and artifacts due to In addition to guide the patient setup process, CBCT data acquired prior to the treatment be used to recalculate or verify the treatment plan based on the patient anatomy of the treatment area. And the CBCT has potential to become a very useful tool for on-line ART.)

• Korean Journal of Remote Sensing
• /
• v.29 no.4
• /
• pp.375-387
• /
• 2013

Accuracy assessment of tide models in polar ocean has to be performed to accurately analyze tidal response of glaciers by using Double-Differential Interferometric SAR (DDInSAR) technique. In this study, we used 120 DDInSAR images generated from 16 one-day tandem COSMO-SkyMed DInSAR pairs obtained for 2 years and in situ tide height for 11 days measured by a pressure type wave recorder to assess the accuracy of tide models such as TPXO7.1, FES2004, CATS2008a and Ross_Inv in Terra Nova Bay, East Antarctica. Firstly, we compared the double-differential tide height (${\Delta}\dot{T}$) for Campbell Glacier Tongue extracted from the DDInSAR images with that predicted by the tide models. Tide height (T) from in situ measurement was compared to that of the tide models. We also compared 24-hours difference of tide height ($\dot{T}$) from in situ tide height with that from the tide models. The root mean square error (RMSE) of ${\Delta}\dot{T}$, T and $\dot{T}$ decreased after the inverse barometer effect (IBE)-correction of the tide models, from which we confirmed that the IBE of tide models should be corrected requisitely. The RMSE of $\dot{T}$ and ${\Delta}\dot{T}$ were smaller than that of T. This was because $\dot{T}$ is the difference of tide height during temporal baseline of the DInSAR pairs (24 hours), in which the errors from mean sea level of the tide models and in situ tide, and the tide constituents of $S_2$, $K_2$, $K_1$ and $P_1$ used in the tide models were canceled. This confirmed that $\dot{T}$ and ${\Delta}\dot{T}$ predicted by the IBE-corrected tide models can be used in DDInSAR technique. It was difficult to select an optimum tide model for DDInSAR in Terra Nova Bay by using in situ tide height measured in a short period. However, we could confirm that Ross_Inv is the optimum tide model as it showed the smallest RMSE of 4.1 cm by accuracy assessment using the DDInSAR images.

• Journal of fish pathology
• /
• v.11 no.2
• /
• pp.113-117
• /
• 1998

The influence of temperature on the rate of egg production and embryonic development of Microcotyle sebastis was investigated to determine the precise time of a second treatment. The survival time of the adults of M. sebastis was inversely proportional to temperature. The number of laid eggs per each replicate during the first 24 h was $39.3{\pm}4.0$ at $10^{\circ}C$, $62.7{\pm}14.2$ at $15^{\circ}C$, $101.0{\pm}5.6$ at $20^{\circ}C$ and $89.0{\pm}11.0$ at $25^{\circ}C$. The time required for egg hatching of M. sebastis was $31.30{\pm}4.88$, $17.52{\pm}3.24$, $11.59{\pm}3.02$ and $10.76{\pm}3.10$ days at 10, 15, 20 and $25^{\circ}C$, respectively. The regression models of the time required for the beginning and 50% point of hatching according to the different temperatures were as follows; Beginning of hatch: D=58.2000-$4.2067{\times}Temp+0.0867{\times}(Temp)^2$ ($P\leq0.01$), 50% of hatch: D=91.3833-$7.5767{\times}Temp+0.1767{\times}(Temp)^2$ ($P\leq0.01$).

• Food Engineering Progress
• /
• v.15 no.1
• /
• pp.48-55
• /
• 2011

In this research, the near-infrared absorption from 1,100-2,300 nm was used to measure the content of capsaicinoids in the red-pepper powder by using the Acousto-optic tunable filters (AOTF) spectrometer with sample plate and sample rotating unit. Non-spicy red-pepper samples from one location (Younggwang-gun. Korea) were mixed with spicy one (var. Chungyang) to make samples separated by particle size (below 0.425 mm, 0.425-0.71 mm, and 0.71- 1.4 mm). The Partial Least Squares Regression (PLSR) model to predict the capsaicinoid content on particle sizes was developed with measured spectra by AOTF spectrometer and used to analyze the amount of capsaicinoids by HPLC. The PLSR Model of red-pepper powder of below 0.425 mm, 0.425-0.71 mm, and 0.71-1.4 mm with cross validation had ${R_V}^2$ = 0.948-0.979 and Standard Error of Prediction (SEP) = 6.56-7.94 mg%. The prediction error of smaller particle size of red-pepper powder was low. The best PLSR model was found in pretreatment of Range Normalization, Standard Normal Variate, and 1st Derivatives of red-pepper powder of below 1.4 mm with cross validation, having ${R_V}^2$ = 0.959 and SEP = 8.82 mg%.

• Journal of the Korean Society of Radiology
• /
• v.17 no.2
• /
• pp.257-265
• /
• 2023

The purpose of this study was to vaccinate every year according to the general characteristics of COVID-19, whether to vaccinate every year according to the vaccination experience, whether to vaccinate every year according to knowledge/attitude about vaccination, and negative responses to the vaccinate every year In order to understand the factors affecting the vaccination physician every year by identifying the factors of Statistical analysis is based on general characteristics, variables based on vaccination experience, and knowledge/attitudes related to vaccination. The doctor calculates the frequency and percentage, A square test (-test) was performed, and if the chi-square test was significant but the expected frequency was less than 5 for 25% or more, a ratio difference test was performed with Fisher's exact test. Through multiple logistic regression analysis using variables that were significant in simple analysis, a predictive model for future vaccination and the effect size of each independent variable were estimated. As statistical analysis software, SAS 9.4 (SAS Institute Inc., Cary, NC, USA) was used, and because the sample size was not large, the significance level was set at 10%, and when the p-value was less than 0.10, it was interpreted as statistically significant. In the simple logistic regression analysis, the reason why they answered that they would not be vaccinated every year was that they answered 'to prevent infection of family and hospital guests' rather than 'to prevent my infection' as the reason for the vaccination. It was 11.0 times higher and 3.67 times higher in the case of 'for the formation of collective immunity of the local community and the country'. The adverse reactions experienced after the 1st and 2nd vaccination were 8.42 times higher in those who did not experience pain at the injection site than those who did not, 4.00 times higher in those who experienced swelling or redness, and 5.69 times higher in those who experienced joint pain. There was a 5.57 times higher rate of absenteeism annually than those who did not. In addition, the more anxious they felt about vaccination, the more likely they were to not get the vaccine every year by 2.94 times.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.1
• /
• pp.13-19
• /
• 2016

Purpose In order to calculate the left ventricular ejection fraction (LVEF) accurately, it is important to acquire the best septal view of left ventricle in the multi-gated cardiac blood pool scan (GBP). This study aims to acquire the best septal view by measuring angle of ventricular septal wall (${\theta}$) using enhanced CT scan and compare with conventional method using left anterior oblique (LAO) 45 view. Materials and Methods From March to July in 2015, we analyzed the 253 patients who underwent both enhanced chest CT and GBP scan in the department of nuclear medicine at National Cancer Center. Angle (${\theta}$) between ventricular septum and imaginary midline was measured in transverse image of enhanced chest CT scan, and the patients whose difference between the angle of ${\theta}$ and 45 degree was more than 10 degrees were included. GBP scan was acquired using both LAO 45 and LAO ${\theta}$ views, and LVEFs measured by automated and manual region of interest (Auto-ROI and Manual-ROI) modes respectively were analyzed. Results $Mean{\pm}SD$ of ${\theta}$ on total 253 patients was $37.0{\pm}8.5^{\circ}$. Among them, the patients whose difference between 45 and ${\theta}$ degrees were more than ${\pm}10$ degrees were 88 patients ($29.3{\pm}6.1^{\circ}$). In Auto-ROI mode, there was statistically significant difference between LAO 45 and LAO ${\theta}$ (LVEF $45=62.0{\pm}6.6%$ vs. LVEF ${\theta}=64.0{\pm}5.6%$; P = 0.001). In Manual-ROI mode, there was also statistically significant difference between LAO 45 and LAO ${\theta}$ (LVEF $45=66.7{\pm}7.2%$ vs. LVEF ${\theta}=69.0{\pm}6.4%$; P < 0.001). Intraclass correlation coefficients of both methods were more than 95%. In case of comparison between Auto-ROI and Manual ROI of each LAO 45 and LAO ${\theta}$, there was no significant difference statistically. Conclusion We could measure the angle of ventricular septal wall accurately by using transverse image of enhanced chest CT and applied to LAO acquisition in the GBP scan. It might be the alternative method to acquire the best septal view of LAO effectively. We could notify significant difference between conventional LAO 45 and LAO ${\theta}$ view.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.2
• /
• pp.391-400
• /
• 1997

Background : Bronchoscopy is an essential procedure for identifying the bleeding site and evaluating cause of hemoptysis. However, it is controversial regarding to the timing of bronchoscopy in patients with hemoptysis. Early bronchoscopy, which was performed during hemoptysis or with 48hour after cessation of bleeding, was better for identifying the site of bleeding compared with delayed bronchoscopy, which was performed 48 hours after cessation of bleeding. The diagnostic yield of identifying the bleeding site by bronchoscopy was variable in reported literature and the safety of early bronchoscopy was not mentioned in previous literature. Therefore, we evaluated the efficacy and safety of early bronchoscopy in patients with hemoptysis. Method : From October 1994 to August 1996 in Samsung Medical Center, bronchoscopy was performed in patients with hemoptysis. Early bronchoscopy was performed prospectively during hemoptysis or within 48 hours after cessation of bleeding from May 1995 to August 1996. Delayed bronchoscopy group included patients who did not received early bronchoscopy at the same period or in whom bronchoscopy was performed 48 hour after cessation of bleeding from October 1994 to May 1995. Results : Early bronchoscopy group was performed 73 times in 71 patients. Delayed bronchoscopy was performed in 57 times in 55 patients. There was no difference as to amount and underlying cause of hemoptysis between both groups. Indentification of bleeding site by visualizing active bleeding was significantly higher in early bronchoscopy (38.3%) than delayed bronchoscopy group (8.7%)(p < 0.05). Indentification of bleeding site by bleeding after clot removal was 8 in early and 10 in delayed bronchoscopy. Indentification of bleeding site by visualizing active bleeding and bleeding after clot removal was 36 in early and 15 patients in delayed bronchoscopy(p > 0.05). Causes of hemoptysis was found in 18 patients in early and 16 patients in delayed bronchoscopy group. patients who had early bronchoscopy underwent surgery. We diagnosed the site of bleeding in 4 patients preoperatively. In 3 patients we made a treatment plan promptly right after bronchoscopy. Among early bronchoscopy group, bleeding over 100cc during bronchoscopy occurred in 2 patients. In early bronchoscopy group there was no other major complication during bronchoscopy. Conclusion : In patients with hemoptysis, early bronchoscopy which performed within 48 hours after cessation of bleeding was more effective procedure for identifying the bleeding site than delayed bronchoscopy which was performed after 48 hour cessation of bleeding.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.101-108
• /
• 2012

This study was conducted to confirm the mass production of male pupae and sex-limited larval marking variety as a host for synnemata production of Isaria tenupes in RDA(Rural Development Administration). Silkworm pupation, infection rate and synnemate formation of I.tenuipes were examined. Among the silkworm varieties tested, male Hansaengjam showed the highest pupation rate at 98.7%. I. tenuipes infection rate of larvae of newly-exuviated 5th instar silkworm was 83.7 ~ 90.4% in the spring rearing season and 91.7 ~ 96.6% in the autumn rearing season. Synnemata production of I. tenuipes was execellent in female Yangwonjam with an incidence rate of 99.5% followed by male Yangwonjam(99.5%) and Baegokjam(99.4%) in the spring and autumn rearing season. Synnemata living weight ranged from 0.93 ~ 1.25 g in the spring rearing season. The female Hansaengjam had the heaviest synnemata weight(1.25 g). Synnemata dry weight ranged from 0.27 ~ 0.35 g in the spring rearing season. The female Yangwonjam had the heaviest synnemata weight(0.35 g).