• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.622-629
• /
• 2009

Modern figurative work is designed to have more creativity and characteristic traits by pure thought of the formative ceramic arts. In compliance with the demand which is various the design development could be satisfied an individuality and a taste is become accomplished. In this view, this study looks over expressive aspect of Cubism to present partition as a independent formative ceramic arts is able to contribute emotionally to our whole lives. In this procedure, this work is produced to express a three-dimensional effect and a spatial effect, approaching a figurative side. This is to overcome the limitation of Cubism art expressed in a two-dimensional surface in spite of its multi-dimensional observation of a given object. Accordingly, this study tries approaching pre-understanding of expressive aspect of Cubism which was the important turning-point in 20c art and expansion of the modern ceramic art field before producing the work. This study shows the possibility to become a creative and practical ceramic art work, approaching the new point of view breaking from the established conception. Consequently, the field of ceramic art could be expanded to a part of modern ceramic art as an object of study in art of life.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.9
• /
• pp.29-38
• /
• 2015

In this study, track dynamic interaction characteristics caused by the vehicle running through transitional section such as bridge abutments were studied using the finite element analysis program. The geometric condition of track was generated by trigonometric function and allowable maximum track irregularity is determined by KORAIL track maintenance criteria. The sub-infrastructure under rail fastener system was modelled by 3D solid elements. To reduce computational cost only half track line is numerically considered and the roller boundary condition was applied to each side of model. In this study, the vehicle-track dynamic interaction analysis was carried out for standard Korean transition section of concrete track and the dynamic behaviors were investigated. The dynamic characteristics considered are wheel load variation, vertical acceleration at body, and maximum Mises stress at each part of transitional section.

• Journal of the Korean earth science society
• /
• v.37 no.3
• /
• pp.143-161
• /
• 2016

This study is concerned with new excavation methods and techniques for fossil tracks/trackways and its application. Unlike the body fossils such as dinosaur skeletons and isolated bones, the Mesozoic vertebrate tracks and trackways including dinosaurs, pterosaurs, and birds are usually discovered in long-distance trackways. The trackways are also found in a large area of the bedding plane and preserved as two-dimensional and flat characteristic. New excavation methods for fossil footprints reflecting these characteristics have been designed to excavate fossil footprints preserved on wide bedding plane and applied to five excavation fossil tracksites. As a result of its application, the tracks and trackways of dinosaur, pterosaur, and bird were successfully excavated. And based on various excavation cases, the step-by-step process and details of the fossil footprints excavation was proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.653-663
• /
• 2012

The study considers the high maneuverability flight and path optimization is conducted to investigate the appropriate generation of the lift and thrust considering the angle of the stroke plane. The path optimization problem is defined according to the various purposes of the high maneuverability flight. The flying purposes are to maximize thrust force, lift force and both lift and thrust forces. The flapping motion of the airfoil is made by a combined sinusoidal plunging and pitching motion in each problem. The optimization process is carried out by using well-defined surrogate models. The surrogate model is determined by the results of two-dimensional computational fluid dynamics analysis. The Kriging method is used to make the surrogate model and a genetic algorithm is utilized to optimize the surrogate model. The optimization results show the flapping motions for the high maneuverable flight. The effects on the generation of lift and thrust forces are confirmed by analyzing the vortex.

• Archives of design research
• /
• v.15 no.4
• /
• pp.77-86
• /
• 2002

3D computer applications provide various functions such as modeling, rendering, animation, lighting and so on. Lighting is the core element in that light visualizes shape and develops characteristics of surface. In spatial design, light is the most important factor in deciding color, texture and illumination level which are the basic factors of spatial design. The purpose of this study is to define the characteristics of lighting in digital space provided by the computer, based on the fact that physical space cannot be separated from digital space, and to show how light in the physical realm relates to computer graphics technologies. This study shows there are following characteristics of light in digital space; iconic light, modifiable surface, shadowless light, 2-dimensional perception, and the particulate aspect of light but not the wave aspect of light. Light in physical or digital space is capable of producing a visual sensation. The experimental space can be realized due to the lack of physics. Further study in new illumination procedures are required as computer media expands.

• Journal of the Korean Society of Food Culture
• /
• v.1 no.3
• /
• pp.211-218
• /
• 1986

The doma (cutting board) is an essential kitchen utensil. The general doma used at present is not sultable for cutting kimchi-like juicy foods, because It is a nat flat structure. Kimchi juice contains vitamins, organle acids, and lactic acid bacteria, and inhibits Oxidation of flavor of kimchi. In addition, if the juice flows down on the doma during cutting the doma work-table and kimchi bottom is contaminated. In this studies a new type of doma for kimchi. was made in order to minimize the Juice Iou during cutting. This new one baa a two-dimensional function of low due to length slope face and slanted gutter of width. No this new type has been developed worldwide, as far as the present writer is aware. The new one has various effectivenesses: minimixing loss of kimchi juice and contamination of doma work-table and kitchen bottom by kimchi juice, saving water and time to water contaminated cutting board, work-table and diahtowel (hangju). preventing round from falling down frorr doma duing cutting, decreasing damage of cutting the user's finger, cutting by the fixed size and shape. Draining and drying is easy and it is convenient to cut all juicy food.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.838-845
• /
• 2009

The inelastic response characteristics of the standard school buildings depending on selection of hysteresis models are reviewed. Three earthquake records of El-centre, Santa-Monica, Taft and three artificial earthquake records in accordance with Korea standard are used and the inelastic response characteristics such as story shear force, story drift ratio, story displacement, hinge distribution state are reviewed with various hysteresis models. As results, story shear force is increased by maximum 60% according to hysteresis model. And Story drift ratio is increased by maximum 42% according to hysteresis model. And The result with clough model shows the maximum hinge distribution state.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.219-226
• /
• 2012

We investigated the performance of a visible light communication (VLC) transceiver applicable to both of illumination and wireless communication. we considered the visibility of VLC, the easy connection for wireless communication and high-speed transmission and implemented VLC transceiver based on edge-emitting laser diode and silicon photodiode. The proposed VLC transceiver is designated to operate in a full duplex mode at high speed of 120 Mbit/s. The shielding method that is employed as a means to reduce the light cross coupling effect inside the VLC transceiver is proposed and its performance is experimentally measured. We also applied optical antenna to have the larger angle of field of view (FOV) to novel structure of VLC transceiver and examined and analyzed their bit error rate performance, photometric result with respect to the transmission distance, the coverage range and the tilt degree as transmission link characteristic between two transceivers without optical antenna and with optical antenna.

• Journal of Korea Water Resources Association
• /
• v.43 no.10
• /
• pp.921-932
• /
• 2010

In this study, the adjustment processes of the disturbed channels by sand or gravel mining were investigated by a two dimensional numerical model in the generalized coordinate system. As a numerical scheme, the CIP (cubic interpolated pseudoparticle method) method was used to calculate the advection term in the flow field and central difference method was used to the diffusion term in it. The pit of the channel was partially filled with sediment at the toe of the pit upstream. As time increased, the headcut erosion upstream in the pit was decreased due to the sediment inflow. The almost inflow sediment upstream was trapped into the pit and the sediment deposit wedge migrated downstream in the pit with the steep submerged angle of repose. The numerical model was reproduced well the evolution processes of the channel. The mining pit migrated with speed as the channel was steep, and the numerical results were in overall agreement with the experimental results.

• Journal of the Korean Magnetics Society
• /
• v.21 no.1
• /
• pp.15-22
• /
• 2011

It is necessary to describe the hysteresis characteristics of magnetic material precisely for the analysis or design of system with ferromagnetic materials. Although Preisach model is regarded as the most accurate method to describe the hysteresis characteristics, it is not widely applied to the real systems because of some difficulties. The conventional Preisach model shows the numerical instabilities during the iterative computations because the density distribution obtained from the sets of M-H curves are strongly localized. To remove such numerical instabilities, M-B instead of M-H is adopted as an implementation variable in normal Preisach modeling. The two dimensional computations with hysteresis characteristics by using normal Preisach modeling are tested and the result showed that the modeling by using M-B variables showed better stabilities than M-H variables.