• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.159-163
• /
• 2005

The propriety between suppliers and demanders in geometric design is very important. Although the final purpose of constructing roads is to concern about the driver s comfort, unfortunately, it has not been considered so far. We've considered the regularity and quickness in considering driver's comfort but there should be considered the safety for the accident as well. If drivers are appeared to be more speeding than designer's intention, there will be needed some supplements to increase the safety rate for the roads. Even if both an upward and downward section are supposed to exist at the same time for solid geometry of the roads like this, it is true that the recent design for the 3-D solid geometry section has been done as flat 2-D and the minimum plane curve radius and the maximum cant have been decided just by calculating without considering operating speed between an upward and downward section at the same point. In this investigation, thus, I'd like to calculate the safety of the cant by considering the speed features of the solid geometry for the first lane of four lane rural roads. To begin with, we investigated the driving speed of the car, which is not been influenced by a preceding car to analyze the influence of the geometrical structure by using Nc-97. Secondly, we statistically analyzed the driving features of the solid geometry after comparing the 6 sections, that is, measuring the driving speed feature at 12 points and combining the influence of the vertical geometry and plane geometry to the driving speed of the plane curve which was researched before. Finally, we estimated the value of cant which considers the driving speed not by using it which has applied uniformly without considering it properly, though there were some differences between a designed speed and driving speed through the result of the basic statistical analysis but by introducing the new safety rate rule, a notion of ${\alpha}$. As a result of the research, we could see the driving features of the car and suggest the safety rate which considers these. For considering the maximum cant, if we apply the safety rate, the result of this experiment, which considers 3-D solid geometry, there'll be the improvement of the driver's safety for designing roads. In addition, after collecting and analyzing the data for the road sections which have various geometrical structures by expanding this experiment it is considered that there should be developed the models which considers 3-D solid geometry.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.6
• /
• pp.423-446
• /
• 2023

Shield TBM tunnel linings are segmented into segments and rings. This study investigates the response characteristics of the stress and displacement of the segment lining under seismic waves through modeling that considers the interface behavior between segments by applying a shell interface element to the contact surface between segments and rings. And there is no management criteria for ovaling deformation of segment linings in Korea. So, this study the ovality criteria and meaning of segment lining. The results of study showed that the distribution patterns of stress and displacement under seismic waves were similar between continuous linings and segment linings. However, the maximum values of stress and displacement showed differences from segment linings. The stress distribution of the continuous lining modeled as a shell type has a stress distribution that has continuity in the 3D cylindrical shape, but the segment lining is concentrated outside the segment, and the largest stress occurs at the location where the contact surface between the segment and the ring is concentrated. This intermittent and localized stress distribution shows an increasing as the ovality of the lining increases at seismic waves. The ovality at which the increase in stress distribution begins to show irregularity and localization is about 150‰. Ovality of 150‰ is an unrealistic value that cannot represent actual lining deformation. Therefore, the ovality of the segment lining increase with depth, but it does not have a significant impact on the stability caused by seismic load.

• Journal of Environmental Science International
• /
• v.16 no.4
• /
• pp.523-532
• /
• 2007

This study utilized the 1/25,000 topographic map of the upper area from the Geum-ho watermark located at the middle of Geum-ho river from the National Geographic Information Institute. For the analysis, first, the influence of the size of critical area to the hydro topographic factors was examined changing grid size to $10m{\times}10m,\;30m{\times}30m\;and\;50m{\times}50m$, and the critical area for the formation of a river to $0.01km^2{\sim}0.50km^2$. It is known from the examination result of watershed morphology according to the grid size that the smaller grid size, the better resolution and accuracy. And it is found, from the analysis result of the degree of the river according to the minimum critical area for each grid size, that the grid size does not affect on the degree of the river, and the number of rivers with 2nd and higher degree does not show remarkable difference while there is big difference in the number of 1st degree rivers. From the results above, it is thought that the critical area of $0.15km^2{\sim}0.20km^2$ is appropriate for formation of a river being irrelevant to the grid size in extraction of hydro topographic parameters that are used in the runoff analysis model using topographic maps. Therefore, the GIUH model applied analysis results by use of the river level difference law proposed in this study for the explanation on the outflow response-changing characters according to the decision of a critical value of a minimum level difference river, showed that, since an ogival occurrence time and an ogival flow volume are very significant in a flood occurrence in case of not undertow facilities, the researcher could obtain a good result for the forecast of river outflow when considering a convenient application of the model and an easy acquisition of data, so it's judged that this model is proper as an algorism for the decision of a critical value of a river basin.

• Journal of Intelligence and Information Systems
• /
• v.24 no.1
• /
• pp.205-225
• /
• 2018

Convolutional Neural Network (ConvNet) is one class of the powerful Deep Neural Network that can analyze and learn hierarchies of visual features. Originally, first neural network (Neocognitron) was introduced in the 80s. At that time, the neural network was not broadly used in both industry and academic field by cause of large-scale dataset shortage and low computational power. However, after a few decades later in 2012, Krizhevsky made a breakthrough on ILSVRC-12 visual recognition competition using Convolutional Neural Network. That breakthrough revived people interest in the neural network. The success of Convolutional Neural Network is achieved with two main factors. First of them is the emergence of advanced hardware (GPUs) for sufficient parallel computation. Second is the availability of large-scale datasets such as ImageNet (ILSVRC) dataset for training. Unfortunately, many new domains are bottlenecked by these factors. For most domains, it is difficult and requires lots of effort to gather large-scale dataset to train a ConvNet. Moreover, even if we have a large-scale dataset, training ConvNet from scratch is required expensive resource and time-consuming. These two obstacles can be solved by using transfer learning. Transfer learning is a method for transferring the knowledge from a source domain to new domain. There are two major Transfer learning cases. First one is ConvNet as fixed feature extractor, and the second one is Fine-tune the ConvNet on a new dataset. In the first case, using pre-trained ConvNet (such as on ImageNet) to compute feed-forward activations of the image into the ConvNet and extract activation features from specific layers. In the second case, replacing and retraining the ConvNet classifier on the new dataset, then fine-tune the weights of the pre-trained network with the backpropagation. In this paper, we focus on using multiple ConvNet layers as a fixed feature extractor only. However, applying features with high dimensional complexity that is directly extracted from multiple ConvNet layers is still a challenging problem. We observe that features extracted from multiple ConvNet layers address the different characteristics of the image which means better representation could be obtained by finding the optimal combination of multiple ConvNet layers. Based on that observation, we propose to employ multiple ConvNet layer representations for transfer learning instead of a single ConvNet layer representation. Overall, our primary pipeline has three steps. Firstly, images from target task are given as input to ConvNet, then that image will be feed-forwarded into pre-trained AlexNet, and the activation features from three fully connected convolutional layers are extracted. Secondly, activation features of three ConvNet layers are concatenated to obtain multiple ConvNet layers representation because it will gain more information about an image. When three fully connected layer features concatenated, the occurring image representation would have 9192 (4096+4096+1000) dimension features. However, features extracted from multiple ConvNet layers are redundant and noisy since they are extracted from the same ConvNet. Thus, a third step, we will use Principal Component Analysis (PCA) to select salient features before the training phase. When salient features are obtained, the classifier can classify image more accurately, and the performance of transfer learning can be improved. To evaluate proposed method, experiments are conducted in three standard datasets (Caltech-256, VOC07, and SUN397) to compare multiple ConvNet layer representations against single ConvNet layer representation by using PCA for feature selection and dimension reduction. Our experiments demonstrated the importance of feature selection for multiple ConvNet layer representation. Moreover, our proposed approach achieved 75.6% accuracy compared to 73.9% accuracy achieved by FC7 layer on the Caltech-256 dataset, 73.1% accuracy compared to 69.2% accuracy achieved by FC8 layer on the VOC07 dataset, 52.2% accuracy compared to 48.7% accuracy achieved by FC7 layer on the SUN397 dataset. We also showed that our proposed approach achieved superior performance, 2.8%, 2.1% and 3.1% accuracy improvement on Caltech-256, VOC07, and SUN397 dataset respectively compare to existing work.

• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.339-350
• /
• 2003

The purpose of this study was to investigate the micro-implant height and anterior hook height to prevent maxillary six anterior teeth from lingual tipping and extruding during space closure. We manufactured maxillary dental arch form, bracket and wire, using the computer aided three-dimensional finite element method. Bracket was $.022'{\times}.028'$ slot size and attached to tooth surface. Wire was $.019'{\times}.025'$ stainless steel and $.032'{\times}.032'$ stainless steel hook was attached to wire between lateral incisor and canine. Length of hook was 8mm and force application points were marked at intervals of In. Four micro-implants were implanted on alveolar bone between second premolar and first molar. The heights of them were 4, 6, 8, 10mm starting from wire. We analyzed initial displacement of teeth by various force application point applying force of 150gm to each micro-implant and anterior hook. The conclusions of 4his study are as the following : 1. When the micro-implant height was 4m and the anterior hook height was 5mm and below, anterior teeth were tipped lingually. When the anterior hook height was 6mm and above, anterior teeth were tipped labially. 2. When the micro-implant height was 6mm and the anterior hook height was 6mm and below, the anterior teeth were tipped lingually. When the anterior hook height was 6m and above, the anterior teeth were tipped labially. But lingual tipping of anterior teeth decreased and labial tipping Increased when the micro-implant height was 6mm, compared with 4mm micro-implant height. 3. When the micro-implant height was 8mm and the anterior hook height was 2mm, the anterior teeth were tipped lingually. When the anterior hook height was 3mm and above, labial tipping movement of the anterior teeth increased proportionally. 4. When the micro-implant height was 10mm and the anterior hook height was 2mm and above, labial tipping of the anterior teeth increased proportionally. 5. As the anterior hook height increased, aterior teeth were tipped more labially. But extrusion occurred on canine and premolar area because of the increase of wire distortion. 6. Movement of the posterior teeth was tipped distally during maxillary six anterior teeth retraction using micro-im plant because of the friction between bracket and were Based on the results of this study, we could predict the pattern of the tooth movement according to position of micro-implant and height of anterior hook. It seems that we can find the force application point for proper tooth movement in consideration of inclination of anterior anterior teeth, periodontal condition, overjet and overbite

• The Korean Journal of Nuclear Medicine
• /
• v.32 no.3
• /
• pp.225-237
• /
• 1998

Purpose: We investigated the statistical methods to compose the functional brain map of human working memory and the principal factors that have an effect on the methods for localization. Materials and Methods: Repeated PET scans with successive four tasks, which consist of one control and three different activation tasks, were performed on six right-handed normal volunteers for 2 minutes after bolus injections of 925 MBq $H_2^{15}O$ at the intervals of 30 minutes. Image data were analyzed using SPM96 (Statistical Parametric Mapping) implemented with Matlab (Mathworks Inc., U.S.A.). Images from the same subject were spatially registered and were normalized using linear and nonlinear transformation methods. Significant difference between control and each activation state was estimated at every voxel based on the general linear model. Differences of global counts were removed using analysis of covariance (ANCOVA) with global activity as covariate. Using the mean and variance for each condition which was adjusted using ANCOVA, t-statistics was performed on every voxel To interpret the results more easily, t-values were transformed to the standard Gaussian distribution (Z-score). Results: All the subjects carried out the activation and control tests successfully. Average rate of correct answers was 95%. The numbers of activated blobs were 4 for verbal memory I, 9 for verbal memory II, 9 for visual memory, and 6 for conjunctive activation of these three tasks. The verbal working memory activates predominantly left-sided structures, and the visual memory activates the right hemisphere. Conclusion: We conclude that rCBF PET imaging and statistical parametric mapping method were useful in the localization of the brain regions for verbal and visual working memory.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.167.2-168
• /
• 2003

현대 사회는 서구적인 식생활의 변화로 인해 조리가 간편하고 조리 시간이 짧은 즉석식품과 영양 기호식품을 동시에 충족시켜주는 음식에 대한 소비가 늘고 있는 실정이다. 또한 최근 미곡의 공급량에 비해서 소비량이 해마다 감소하여 재고미의 증가를 볼 때, 쌀의 새로운 이용방법 모색이 절실히 요망된다. 따라서 쌀의 소비촉진과 현대사회의 소비형태를 접목시켜서 쇠고기와 야채를 이용한 즉석쌀죽을 개발하고자 하였다. 쇠고기, 야채 및 쌀가루를 이용한 soup mix의 최적 배합비를 설정하기 위하여 제조조건에 따라 다르게 제조한 쇠고기 야채 쌀죽의 이화학적 및 관능적 특성에 미치는 변화를 조사하였다. 이때 야채의 배합비에 따른 이화학적 및 관능적 특성을 모니터링 하고자 반응표면분석법 (response surface methodology, RSM)을 이용하였다. 요인변수(Xn)를 쌀의 양에 대한 버섯의 비율 (X$_1$), 당근의 비율 (X$_2$), 대파의 비율 (X$_3$)로 하여 중심합성계획에 따라 17실험구로 구분하여 조리실험을 실시하였고, 반응변수(Yn)는 soup mix를 이용하여 제조한 쇠고기 야채 쌀죽의 이화학적 특성인 색도의 L＊값 (Y$_1$), a＊값 (Y$_2$), b＊값 (Y$_3$), 점도(Y$_4$), 퍼짐성 (Y$_{5}$), 고형분 함량(Y$_{6}$), PH (Y$_{7}$)으로 하였으며 관능적 특성인 색 (Y$_{8}$), 향 (Y$_{9}$), 점성 (Y$_{10}$), 맛 (Y$_{11}$), 전체적인 기호도 (Y$_{12}$)를 종속변수로 하여 회귀분석에 이용하였다. 회귀분석에 의한 모델식의 예측에는 SAS (statistical analysis system)program을 사용하였으며, 3차원 반응표면 분석법으로 해석하였다. 야채의 배합비에 따라 제조한 쇠고기 야채 쌀죽의 물리적 특성인 색도의 L＊, a＊, b＊ 값에 대한 반응표면 회귀식의 $R^2$은 각각 0.6098(p＞ 0.05), 0.8803 (p ＜0.05), 0.6781(p＞ 0.05)로서 b값에 있어서 그 유의성이 5%수준에서 인정되어 b값에 미치는 영향이 크다는 것을 알 수 있었다. L＊값은 63-68사이로, a＊값은 0.13에서 -0.89사이를 b＊값은 2-5값 사이에서 변화하여 제조한 죽의 색이 옅은 황색임을 알 수 있었다. 고형분 함량, 퍼짐성과 pH에 대한 $R^2$은 각각 0.4280, 0.5433과 0.2406임을 볼 때 버섯, 당근, 대파의 비율에 따라 제조한 쇠고기 야채 쌀죽의 고형분 함량, 퍼짐성과 pH는 설정된 범위내에서 그 유의성이 인정되지 않아 큰 영향을 미치지 않음을 알 수 있었다. 관능검사 결과, 색과 향에 대한 반응표면 회귀식의 $R^2$은 각각0.6000과 0.7825이고 P-value는 각각 0.4290과 0.0942로서 5% 수준에서 유의한 상관성이 없음을 확인할 수 있었다. 맛과 점성에 대한 $R^2$은 0.8717과 0.8068이고 P-value는 각각 0.0195 (p ＜0.05)와 0.0612로서 야채의 배합비에 따라 맛에 있어서 유의확률 5%수준에서 그 유의성이 인정되었으며, 전체적인 기호도에 대한 유의성은 $R^2$이 0.8463이고 P-value는 0.0344 (p ＜0.05)임을 볼 때, 설정된 범위내에서 야채의 배합비에 따라 제조한 쇠고기 야채 쌀죽의 맛과 기호도에 큰 영향을 미치는 것을 알 수 있었다. 그리고 최대 임계점이 버섯의 첨가량은 0.99%, 당근의 첨가량은 0.97%, 대파의 첨가량은 0.59%에서 최적 반응표면을 나타내었다. 이상의 결과로 볼 때, 야채의 배합비에 따른 맛과 전체적인 기호도에 있어서 그 유의성이 5%수준에서 모두 유의한 상관관계를 보였으며, soup mix 제조시 쌀가루 양에 대한 야채의 최적 배합비는 버섯, 당근, 대파에 있어서 각각 0.99, 0.97과 0.59%임을 알 수 있었다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.4
• /
• pp.305-311
• /
• 2014

Purpose: When the full veneer crown was treated in the tooth with abfraction lesion due to various causes, the prognosis of it may be compromised according to the location of the finish line, but there is few study about the location of its buccal finish line. The purpose of this study was to investigate the effect of location of the finish line of the full veneer crown on stress distribution of the tooth with abfraction lesion. Materials and methods: The two dimensional finite element model was developed to express tooth, surrounding tissue and full veneer crown. The stress distribution under eccentric 144 N occlusal load was analyzed using finite element analysis. The location of finish line was set just at the lower border of the lesion (Group 0), 1 mm (Group 1) and 2 mm (Group 2) below the lower border of the lesion. Results: In the Group 0, von Mises stress was concentrated at the finish line and the apex of the lesion. Also, the stress at the bucal finish line propagated to the lingual side. In the Group 1 and Group 2, stress distribution was similar each other. Stress was concentrated at the apex of lesion, but the stress at the buccal finish line did not propagate to the lingual side. That implied decrease of the possibility of horizontal crown fracture. Conclusion: Full veneer crown alleviated the stress concentrated at the apex of the abfraction lesion, when the finish line of full veneer crown was set below the lower border of abfraction lesion.

• Journal of Korean Academy of Nursing
• /
• v.23 no.3
• /
• pp.417-430
• /
• 1993

이 연구는 환경적 요소(간호사의 자율성, 조직의 표준화)와 개인의 특성(통제위, 나이, 경험. 간호역할개념, 도덕성), 직무 스트레스, 윤리적 의사결정 사이의 관계를 이론적 틀을 구성하여 테스트함으로써 그 인과관계를 탐구하였다. 본 연구를 위해 개발된 모형은 1) Katz와 Kahn의 조직에 대한 개방체계 이론(open systems theory of organization) ; 2) Kahn. Wolfe, Quinn, Snoek의 스트레스 이론 (theory of stress) : 3) Kohlberg의 도덕발달 이론(theory of moral develop-ment): 그리고 4) 여러 문헌고찰을 기초로 하였다. 본 연구의 모형은 2가지의 주요 종속변수(직무 스트레스, 윤리적 간호행위), 2가지 매개변수(간호 역할개념, 도덕성 발달정도) 그리고 여러 독립변수들(조직의 표준화, 자율성, 통제위, 교육, 나이, 경험 등)로 구성되었다. 간단히 말해, 간호사의 스트레스와 윤리적 간호행위 를 개인 자신과 환경이라는 두 요소의 결과로 간주한 것이다. 미국(2개주)의 여러 건강관리기관에 근무하는 224명의 정규 간호사를 대상으로 하였고. 가설 검증을 위하여 1) 변수간의 인과관계를 조사하기 위한 Linear Structural Relationships(LISREL)기법과 2) 나이, 경험, 교육이 변수간의 관계에 미치는 중간역할을 알아보기 위해 상관분석을 이용하였다. LISREL결과를 보면 제시된 모델이 각 내재 변수에 상당한 설명력을 가지면서 자료에 잘 맞는 것으로 나타났다. 이 연구에서 가장 뚜렷한 점으로 나타난 것은 개인의 특성보다 환경적 요소로서의 자율성이 직무스트레스와 윤리적 의사결정을 예견하는데 훨씬 중요한 변수로 부각되었다는 점이다. 또한 간호사의 전문적 역할개념과 봉사적 역할개념이 간호사의 윤리적 의사결정을 예견하는 가장 중요한 요소로 나타났다. 중간영향(moderation effect)을 보면, 젊고 경험이 적은 간호사일수록 나이가 많고 경험있는 간호사보다 환경적 요소(자율성)에 더 큰 영향을 받는다는 것을 암시하고 있다. 또한 4년제 대학 이상을 졸업한 간호사의 윤리 적 간호행 위 는 2, 3년제 를 졸업 한 간호사 보다 환경적 요소에 의해 덜 영향을 받는 것으로 나타났다. 한편 자율성의 부족은 2, 3년제 졸업 간호사보다 4년제 졸업 간호사에게 더 심한 스트레스가 되고 있음을 시사하였다. 이 연구의 결과로부터 적어도 다음과 같은 두 가지 실제적인 제언을 도출할 수 있다. 첫째, 이 연구는 환경적요소로서의 자율성이 다른 어떤 개인적인 요소보다 직무 스트레스를 예견하는 데 중요한 요소라는 것을 제시하였다. 이것은 간호행정가들에게, 간호사의 직무 스트레스를 감소시키기 위해선 “자율성”이 아주 중요히 다루어져야 한다는 것을 의미한다. 만일 간호사들의 직무스트레스가 그 개인의 복지에 큰 해가 되고 환자를 간호하는 데 직접적으로 관계된다면, 간호행정가는 그 조직의 직무체계를 다시 평가해서 일에 대한 새로운 설계가 필요한지를 파악해야 한다. 또한 이 연구는 직무를 다시 설계할 경우, 누구에게 먼저 촛점을 두고 시작해야 하는지를 밝혀주고 있다. 즉, 젊고 경험이 미숙한 간호사들에게 촛점을 두고 시작해야 하며, 작업환경의 가장 중요한 차원중의 하나인 사회적 지원(social support)을 조심스럽게 고려해 보아야 한다. 둘째, 간호사의 윤리적 간호행위를 높히기 위해 전문적 역할개념과 봉사적 역할개념이 재강조될 필요가 있다. 이 두 역할개념 들을 교육을 통하여 효과적으로 가르칠 필요가 있다고 본다. 이 두 개념들이 간호사의 바람직한 간호행 위에 영향을 미치는 가장 중요한 요소로 나타났기 때문이다. 또한, 본 연구결과에 따르면, 경험이 많을수록 일에 싫증을 느껴 바람직한 윤리적 간호행위가 감소되는 경향이 있었다. 따라서, 건강관리체제 (health care system) 안에서의 간호사의 역할이-전문직으로서의, 그리고 환자를 위한 옹호자로서의-학교와 임상에서 효과적으로 교육되어져야 한다고 본다. 간호사들의 역할에 대한 계속적인 교육이 학생은 물론 임상 간호사들에게도 실시되어져야 할 것이다. 미래연구의 방향을 제시해 보면 첫째로 연구의 일반화를 높히기 위해 더 많은 대상자를 포함시켜야 한다. 이는 여러 종류의 표본을 반드시 한번에 전부 포함시켜야 한다는 것을 의미하는 것이 아니고, 특정한 여러 표본들을 연속적으로 연구함으로서 이 목표를 성취할 수 있다고 생각한다. 둘째는 여러 construct들(윤리적 간호행위, 직무 스트레스, 간호 역할개념 등)에 대한 적절한 측정도구를 개발해야 한다. 측정도구를 개발하기 위해서는 풍부하고 세세한 통찰력을 제공하는 질적인 정보를 얻는 것이 선행되어야 한다. 셋째, 윤리적 간호행위와 직무 스트레스에 관한 연구를 증진시키기 위해 실험설계 및 종단적 연구(expel-imental, longitudinal design)가 시도될 필요가 있다. 마지막으로, 윤리적 간호행위와 직무 스트레스를 예견할 수 있는 이론적 탐구(theoretical exploration), 즉 이론정립을 위하여, 환경적 요소와 개인의 특성에 대한 자세한 정보를 제공해 줄 수 있는 질적 연구들이 요구된다.

• Journal of the Korean Society of School Health
• /
• v.22 no.1
• /
• pp.1-16
• /
• 2009

Purposes: The objective of this study was to develop a management program for Korean elementary school students suffering from asthma, which would be based on the Australian Asthma-Friendly Schools (AFS) program. Methods: On the basis of the AFS program, we designed a 6-month pilot project for asthmatic students in two elementary schools in a rural area and one elementary school in an urban area of Korea. The pilot project consisted of the following processes: identifying students with asthma in a school, educating school staffs and the parents of an asthmatic child, registering those with asthma, and installing emergency kits for asthma attacks in school health rooms. In order to evaluate these processes, group discussions were held between project team members and school staffs in each area. In addition, we conducted a postal survey of 144 households having an asthmatic child. Results: The screening process adopted in this program resulted in the early diagnosis in asthma; however, it needs to be evaluated economically due to expensive diagnostic test for asthma. For the school nurses, asthma lessons were evaluated as being very helpful for their tasks, while teachers tended to take less interest in the program with only 45% of all teachers attending these lessons. Almost all participating parents reported that such lessons would be beneficial for the care of their child, even though only 24.2% of the survey respondents (122 households) attended the lessons. Installing emergency kits in school health rooms was regarded as a key feature of this project. The introduction of a register card containing more specific health records of asthmatic students was considered necessary to replace the existing list of students with asthma. Conclusion: This study has merit in that a Korean asthma-friendly schools program was developed for the first time, despite the many obstacles to such programs becoming more common.