• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.11-23
• /
• 1997

This paper contains a new approach to blade section design method for marine propellers. The hydrodynamic characteristics of 2-D section are highly influenced by its geometrical parameters i.e., thickness and camber distributions and leading edge radius etc. To consider fully turbulent flow field near 2-D section. the finite volume method with k-${\varepsilon}$ turbulent model which solve Reynolds time averaged Navier-Stokes(RANS) equation is applied. In this study, O-type grid system that can provide many calculation points on blade surface is used. The results were compared with those of the experiment of NACA0012 to confirm the accuracy of the developed codes. The goal of this study is the development of a blade section with high efficiency and low drag. To achieve this, we carried out the tests of lift, drag and cavitation characteristics in cavitation tunnel. The results of experiment were compared with numerical results in order to validate the proposed blades design method. By comparing the numerical results with the experiments, we found that the new blade section, KH28 allows superior performance in efficiency and cavitation avoidance characteristics. We further investigated the blade section design method and an application study of this section, KH28 to apply to the marine propeller. In order to improve the accuracy of numerical results on prediction of lift and drag, we conclude here that the 2-layer boundary model must be used.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.69-76
• /
• 1991

A design method based on the surface vorticity distribution is developed to generate a two-dimensional blade section for prescribed velocity distribution in potential flow. The boundary condition used to determine the strength of vorticity distribution requires that the surface of blade section should be a streamline of the resulting flow. In order to obtain the required final geometry of a two-dimensional blade section, an iterative procedure is used. A computer program is developed and several numerical results are presented.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.146-158
• /
• 1991

The flow around a two-dimensional foil section Is measured by a LDV(Laser Doppler Velocimetry) system which is capable of measuring the datailed flow field without interfering the original flow field. A 2-color 3-beam LDV system, which is capable of mea,;tiring 2 velocity components simultaneously and uses 2W Ar-Ion laser source, is used to measure the flow field around an NACA0012 foil section. The measured flow velocities are analysed iii order to study the boundary layer characteristics, flow separation and the detail structure of the flow near the trailing edge of the foil. The boundary layer characteristics are compared with the results by the head's momentum integral method. For the case of small angle of attack at relatively higher Reynolds number, both results show good agreements. The measured data of the velocity field around an NACA0012 foil section would be valuable data to validate the CFD(Computational Fluid Dynamic) calculation results. The developed experimental technique to evaluate the characteristics of two-dimensional foil sections is essential tool to develope new blade sections which have good lift characteristics and better cavitation performances.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.10
• /
• pp.1-6
• /
• 2006

This paper predicts the stall characteristics of three-dimensional wings. An iterative decambering approach is introduced into the nonplanar lifting surface method to take into consideration the stall characteristics of wings. An iterative decambering approach uses known airfoil lift curve and moment curve to predict the stall characteristics of wings. The multi-dimensional Newton iteration is used to take into consideration the coupling between the different sections of wings. Present results are compared with experiments and other numerical results. Computed results are in good agreement with other data. This scheme can be used for any wing with the twist or control surface and for wing-wing configurations such as wing-tail configuration or canard-wing configuration.

• Transactions of the KSME C: Technology and Education
• /
• v.2 no.1
• /
• pp.39-46
• /
• 2014

This study presents computational analysis of aerodynamic characteristics of two-dimensional airfoil sections with elastic flap attached at the trailing edge. EDISON_CFD was utilized to simulate the incompressible turbulent flow around the foil and MIDAS_IT was employed to estimate the deflection of the flap under the pressure loading. Using iterative procedure, the terminal deflection was estimated and the resulting lift-drag ratio indicates that the favorable effect of the flap is expected within certain amount of angle of attack.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.41-50
• /
• 1989

A basic formulation of the panel method, which is based on the potential field formulation, is reviewed for the case of two-dimensional hydrofoil problems. Numerical procedures to improve the computational efficiency of the panel method are suggested. By investigating local behavior of the flow around the trailing edge, a wedge type Kutta condition is formulated. By subdividing the trailing edge panels, where dipole strengths of the subdivided panels follow the local behavior of the potential values of the flow outside a wedge, the circulation around a hydrofoil is calculated accurately with a relatively small number of panels. The subdividing technique to improve the accuracy of the numerical Kutta condition is proved to be efficient. A local behavior of the flow around the leading edge is also investigated. By matching the flow around the leading edge with that around a parabola, a very accurate velocity distribution is obtained with relatively small number of panels. An accurate prediction of the stagnation point and the pressure distribution near the leading edge may contribute to improve the accuracy of cavity predictions and boundary layer calculations around hydrofoils.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3A
• /
• pp.145-152
• /
• 2011

Current Bridge Specification for Highway Bridges adopts a simplified method to determine sectional forces of abutment wing by dividing its area into four sections. This simplified method was developed in Japan when numerical analysis was not mature and computer resources were expensive. This simplified method has been with us without modification. This study evaluates the problem of current design practice to improve the design guideline for abutment wing. In this study, a finite element model of abutment wing based on shell elements was developed to obtain accurate sectional force. In addition, foreign design specifications regarding abutment wing were thoroughly examined. It has been observed that sectional forces obtained from the simplified method produce inaccurate results under various geometric shapes. Thus, it is recommended that two dimensional plate analyses should be adopted for future design of abutment wing wall.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.29-40
• /
• 1989

A new blade section of propeller is developed to obtain higher propeller efficiency and better cavitation performance. Eleven foil sections are carefully designed and manufactured to compare the lift-drag characteristics and cavitation performances. It is expected that the developed section behaves better in the vicinity of the ship's wake, where the angle of attack variation is large, because of its wider width in lift-drag and cavitation-free bucket diagrams. A propeller design method using the selected foil section is presented. Three chordwise loading shapes are selected to investigate the influence of the lift-drag ratios on the propeller efficiencies and cavitation performances. Three propellers are designed, which correspond to the selected chordwise loading shapes. Two more propellers which use existing foil sections are designed to compare the section performance.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.60-66
• /
• 2000

In order to improve cavitation characteristics for a high-speed propeller, leading edge shape of a 2-D hydrofoil is investigated numerically and experimentally. For flowfield analysis around the leading edge, the incompressible Reynolds Averaged Navier-Stokes(RANS) equation is solved using the standard $k-\varepsilon$ turbulence model and a finite volume method(FVM). The cavitation thickness, which is occurred on hydrofoil surface, is predicted using the panel code. It is shown that the calculation codes predict the experimental trend fairly well. From these results, new hydrofoils are designed

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.14-21
• /
• 2000

The cavitation noise of 2-D hydrofoils is measured a cavitation tunnel. A new experimental method was developed for the noise measurement of 2-D hydrofoil. Three hydrofoils with the span of 600mm are designed and manufactured to investigate cavitation behavior and noise characteristics. The experimental results show the noise characteristics of various cavitation patterns and the noise performance of the three foils very well. This suggests that low-noise propeller blade section can be developed using the present experimental method.