• The Korean Journal of Quaternary Research
• /
• v.20 no.2
• /
• pp.1-10
• /
• 2006

Flooding hazard caused by natural and artificial environmental changes is closely associated with change in river bed configuration. This study is aimed at explaining a river-bed change related to soil erosion in the Keum river basin using GIS and RS. The USLE was used to compute soil erosion rate on the basis of GIS. River-bed profiles stretching from Kongju to Ippo were measured to construct a 3D-geomorphological map. The river-bed change was also detected by remote sensing images using Landsat TM during the period of 1982 to 2000 for the Keum river. The result shows that USLE indicates a mean soil erosion rate of $1.8\;kg/m^2/year$, and a net increase of a river-bed change at a rate of $+5\;cm/m^2$/year in the Kangkyeong area. The change in river-bed is interpreted to have been caused by soil erosion in the downstream of the Keum river basin. In addition river-bed change mainly occurred on the downstream of the confluence where tributaries and the main channel meet. Other possible river-bed change is caused by a removal of fluvial sand aggregates, which might have resulted in a net decrease of exposed area of sediment distribution between 1991 and 1995, while a construction of underwater structures, including a bridge, a reclamation of sand bars for rice fields and dikes, resulted in an increase of the exposed area of river-bed due to sediment accumulation.

• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.93-109
• /
• 2020

Purpose: The radiochromic film (Gafchromic EBT3, Ashland Advanced Materials, USA) and 3-dimensional analysis system dosimetry checkTM (DC, MathResolutions, USA) were evaluated for patient-specific quality assurance (QA) of helical tomotherapy. Materials and Methods: Depending on the tumors' positions, three types of targets, which are the abdominal tumor (130.6㎤), retroperitoneal tumor (849.0㎤), and the whole abdominal metastasis tumor (3131.0㎤) applied to the humanoid phantom (Anderson Rando Phantom, USA). We established a total of 12 comparative treatment plans by the four geometric conditions of the beam irradiation, which are the different field widths (FW) of 2.5-cm, 5.0-cm, and pitches of 0.287, 0.43. Ionization measurements (1D) with EBT3 by inserting the cheese phantom (2D) were compared to DC measurements of the 3D dose reconstruction on CT images from beam fluence log information. For the clinical feasibility evaluation of the DC, dose reconstruction has been performed using the same cheese phantom with the EBT3 method. Recalculated dose distributions revealed the dose error information during the actual irradiation on the same CT images quantitatively compared to the treatment plan. The Thread effect, which might appear in the Helical Tomotherapy, was analyzed by ripple amplitude (%). We also performed gamma index analysis (DD: 3mm/ DTA: 3%, pass threshold limit: 95%) for pattern check of the dose distribution. Results: Ripple amplitude measurement resulted in the highest average of 23.1% in the peritoneum tumor. In the radiochromic film analysis, the absolute dose was on average 0.9±0.4%, and gamma index analysis was on average 96.4±2.2% (Passing rate: >95%), which could be limited to the large target sizes such as the whole abdominal metastasis tumor. In the DC analysis with the humanoid phantom for FW of 5.0-cm, the three regions' average was 91.8±6.4% in the 2D and 3D plan. The three planes (axial, coronal, and sagittal) and dose profile could be analyzed with the entire peritoneum tumor and the whole abdominal metastasis target, with planned dose distributions. The dose errors based on the dose-volume histogram in the DC evaluations increased depending on FW and pitch. Conclusion: The DC method could implement a dose error analysis on the 3D patient image data by the measured beam fluence log information only without any dosimetry tools for patient-specific quality assurance. Also, there may be no limit to apply for the tumor location and size; therefore, the DC could be useful in patient-specific QAl during the treatment of Helical Tomotherapy of large and irregular tumors.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.6
• /
• pp.938-948
• /
• 2009

The purpose of this study was to offer typical facial shapes Korean women in their 20's to 50's. We used facial photographs of 600 Korean women obtained from $2003\sim2004$ Size Korea Project and we measured these photographs indirectly in this study by utilizing the Venus face2D program. Total 62 measurements on the face were measured and analyzed by statistical methods. The results were as follows. First of all, the mean of face length was 196mm, top face length was 62.3mm, middle face length was 68.9mm, bottom face length was 66.5mm, mean of forehead width was 125.1mm. As based on those average sizes, we proposed a average facial size and shape of Korean women and a average facial size and shape of 20's, 30's, 40's and 50's in this study. When examined characteristic of 20's facial shape, it was recognized that the width of forehead was wider and the width of gnathion was smaller than other age groups. In the characteristic of 30's facial shape, the ratios of facial length, top of face, middle of face and bottom of face were balanced well, as comparing with other age groups. Overall, the values of facial measurement of 30's were similar to the averages of total women. In the facial shape of 40's, mean length and width of face each were the smallest among each age group. The eye shape of 40's was more drooped than the average eye shape and the protrusion of the zygomatic bone was significantly different. In case of the facial shape of 50's, it was similar to the facial shape of 40's, but mean lengths and widths of 50's face were slightly larger than the values of 40's. The eye shape of 50's was more drooped than average group and the eye length was the smallest among all age groups.

• Explosives and Blasting
• /
• v.28 no.1
• /
• pp.27-39
• /
• 2010

Blast design equations based on the concept of scaled distances can be obtained from the statistical analysis on measured peak particle velocity data of ground vibrations. These equations represents the minimum scale distance of various recommendations for safe blasting. Two types of scaled distance widely used in Korea are the square root scaled distance (SRSD) and cube root scaled distance (CRSD). Thus, the design equations have the forms of $D/\sqrt{W}{\geq}30m/kg^{1/2}$ and $D/\sqrt[3]{W}{\geq}60m/kg^{1/3}$ in the cases of SRSD and CRSD, respectively. With these equations and known distance, we can calculate the maximum charge weight per delay that can assure the safety of nearby structures against ground vibrations. The maximum charge weights per delay, however, are in the orders of $W=O(D^2)$ and $W=O(D^3)$ for SRSD and CRSD, respectively. So, compared with SRSD, the maximum charge for CRSD increases without bound especially after the intersection point of these two charge functions despite of the similar goodness of fits. To prevent structural damage that may be caused by the excessive charge in the case of CRSD, we suggest that CRSD be used within a specified distance slightly beyond the intersection point. The exact limit is up to the point, beyond which the charge difference of SRSD and CRSD begins to exceed the maximum difference between the two within the intersection point.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.1
• /
• pp.18-23
• /
• 2001

In this paper, the several indexes represented by swimming characteristics of aquarcultured red seabream, Dchrysophrys majors in a farming water raft(10L×10W×5H) were measured by ultrasonic telemetry. The fishes tagged by pingers were tracked by the LBL method(Shin etc., 1994). The location of fishes were calculated by the hyperbolic method and the indexes were estimated by the least square method. The similarity was confirmed by the comparision between experiment and simulation on the swimming trajectory of fishes, the mean distance of individual from wall, the mean swimming speed and the mean distance between the nearest individuals. The obtained results are summerized as follows ; 1. The swimming trajectory of fishes tagged by the pingers and the swimming trajectory by the simulation for 120 minutes showed a simularity. 2. The mean swimming speed by the experiment and the simulation showed 39.2 ㎝/sec (1.4BL ㎝/sec) and 44.4 ㎝/sec (1.6BL ㎝/sec), respectively. 3. The mean swimming depth by the experiment and the simulation showed 238㎝ and 248 ㎝, respectively. 4. The mean distance of individuals from wall of the farming water raft by the experiment and the simulation showed 132 cm and 129 cm, respectively. 5. The mean distance between the nearest individuals by the experiment and the simulation showed 83 ㎝ and 61 ㎝, respectively.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_4
• /
• pp.1209-1220
• /
• 2020

In the case of forest areas, the installation of ground control points (GCPs) and the selection of terrain features, which are one of the unmanned aerial photogrammetry work process, are limited compared to urban areas, and safety problems arise due to non-visible flight due to high forest. To compensate for this problem, the drone equipped with a real time kinematic (RTK) sensor that corrects the position of the drone in real time, and a 3D flight method that fly based on terrain information are being developed. This study suggests to present a method for investigating damage using drones in forest areas. Position accuracy evaluation was performed for three methods: 1) drone mapping through GCP measurement (normal mapping), 2) drone mapping based on topographic data (3D flight mapping), 3) drone mapping using RTK drone (RTK mapping), and all showed an accuracy within 2 cm in the horizontal and within 13 cm in the vertical position. After evaluating the position accuracy, the volume of the landslide area was calculated and the volume values were compared, and all showed similar values. Through this study, the possibility of utilizing 3D flight mapping and RTK mapping in forest areas was confirmed. In the future, it is expected that more effective damage investigations can be conducted if the three methods are appropriately used according to the conditions of area of the disaster.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.281-286
• /
• 2012

Experimental study was performed regarding the effects of disc-like filler orientation and contents on the coefficient of thermal expansion (CTE) of polypropylene composites using the three dimensional ellipsoids ($a_1$ > $a_2$ > $a_3$) analyzed by two aspect ratios(${\rho}_{\alpha}=a_1/a_3$and ${\rho}_{\beta}=a_1/a_2$). Measured data were compared with the theoretical approaches proposed by Lee et al. Mica and talc were useed as disk-like fillers in the composites. As experimental results, ${\alpha}_{11}/{\alpha}_m$ decreased down to ca. 0.56 with mica content of 20 wt% and the aspect ratios, ${\rho}_{\alpha}=13.5$, ${\rho}_{\beta}=1.8$. However, ${\alpha}_{33}/{\alpha}_m$ increased to more than 1. In the case of talc, ${\alpha}_{11}/{\alpha}_m$ decreased to ca. 0.63 with 20 wt% and ${\rho}_{\alpha}=3.7$, ${\rho}_{\beta}=1.4$. Finally, the longitudinal CTEs (${\alpha}_{11}$) of polypropylene composites decreased as filler contents increased, but normal CTE (${\alpha}_{33}$) increased in the low filler contents like the theory.

• Journal of Technology Innovation
• /
• v.23 no.2
• /
• pp.33-54
• /
• 2015

Supercomputing performance demand forecasting at the national level is an important information to the researchers in fields of the computational science field, the specialized agencies which establish and operate R&D infrastructure, and the government agencies which establish science and technology infrastructure. This study derived the factors affecting the scientific and technological capability through the analysis of supercomputing performance prediction research, and it proposed a hybrid forecasting model of applying the super-computer technology trends. In the cross-sectional analysis, multiple regression analysis was performed using factors with GDP, GERD, the number of researchers, and the number of SCI papers that could affect the supercomputing performance. In addition, the supercomputing performance was predicted by multiplying in the cross-section analysis with technical progress rate of time period which was calculated by time series analysis using performance(Rmax) of Top500 data. Korea's performance scale of supercomputing in 2016 was predicted using the proposed forecasting model based on data of the top500 supercomputer and supercomputing performance demand in Korea was predicted using a cross-sectional analysis and technical progress rate. The results of this study showed that the supercomputing performance is expected to require 15~30PF when it uses the current trend, and is expected to require 20~40PF when it uses the trend of the targeting national-level. These two results showed significant differences between the forecasting value(9.6PF) of regression analysis and the forecasting value(2.5PF) of cross-sectional analysis.

• Proceedings of the Korean Society of Applied Entomolohy Conference
• /
• 2006.09a
• /
• pp.45-60
• /
• 2006

최근 국제적으로 생물자원의 중요성이 재인식됨에 따라 이들에 대한 체계적이고 안정적인 정보의 구축 및 활용이 국가경쟁력의 척도로 간주할 정도로 중요성이 커지고 있는 실정이다. 또한, 우리나라는 국토의 64%가 산림으로 되어 있어서 다양한 생물종이 서식하는데 매우 적합한 조건을 갖추고 있다. 이에 따라 산림청과 국립수목원은 국가식물자원정보시스템에 이어 곤충정보에 대한 정보화 사업을 2001년부터 추진해오고 있으며 이 결과로 현재 33만여 점에 곤충표본정보가 구축되기에 이르렀다. 현재까지 국내 유수 곤충표본보유기관 22개 기관이 본 사업에 참여하여 다양하고 내실 있는 정보구축이 이루어져 왔으며 이를 통해 명실 공히 국가적인 곤충자원정보망을 갖추게 되었다. 곤충DB의 국가적인 사업이 추진된 지 6년차에 이르는 2006년도에는 정보통신부의 지원을 받아 14개 표본보유기관이 참여하여 곤충표본DB구축을 중점 추진할 계획이다. 2006년도의 목표량은 곤충표본정보 17,000점으로 기존구축자료 이외에 추가가 필요한 표본정보위주로 구축될 예정이다. 또한, 이미 구축된 곤충표본자원의 활용도와 가치를 높이기 위해서는 더욱 다양하고 많은 자료의 표본을 추가하여 DB화를 추진함은 물론 이들 각각의 정보들을 식물정보와 연계하여 분석 가능토록 하고 GIS시스템을 도입하여 명실공히 국가적인 곤충자원정보의 종합관리가 될 수 있도록 추진하고 있다. 본 사업이 충실히 수행될 경우 국가 주요 생물자원 중 하나인 곤충정보의 DB확대 구축을 통한 전체적인 현황파악 및 체계적인 관리가 가능해 질 것이며, 이와 관련하여 정보화적인 측면, 경제적 측면, 사화 문화적 측면에서 다양한 효과가 기대되며 앞으로도 이에 대한 내실 있는 운영을 위해서는 정부차원의 종합적인 지원 및 관리가 요구되는 시점으로 판단된다.pm3.42$, 저층수 $23.43\pm3.38$이었으며, 전반적으로 해역별 수질기준 I등급 내지는 II등급을 유지하고 있었고, 공간적으로는 외해측으로 갈수록 외해수와 혼합 확산되어 양호한 수질을 나타내었다. 장기적인 변동특성은 세그룹으로 구분되어진다.기 실험결과 용출용매로 증류수와 해수를 이용했을 때, 제강 슬래그에서 용출되는 납, 구리, 카드뮴, 수은의 용출 경향의 차이를 확인할 수 있었고 이에 따라서, 납, 구리, 카드뮴의 용출 유해성은 낮기 때문에 해양구조물로의 제강슬래그 유효이용은 적합할 것으로 판단되었다.im80%$로 계산되었다. 열형광선량계로 측정된 방사선량은 각각 1.8, 1.2, 0.8, 1.2, 0.8 (70 cm 거리) cGy로 측정되었으며, 환자의 복부 표면에서의 서베이메터를 이용한 측정량은 10.9 mR/h였다. 차폐구조물의 사용 시 전체 치료 동안에 태아선량은 약 1 cGy 정도로 평가되었다. 결론 : AAPM Report No.50의 자료에 따르면, 임산부의 방사선 치료 시 태아의 방사선 피폭선량은 5 cGy 이하일 경우에 방사선 피폭에 따른 태아의 위험이 거의 없는 것으로 제시되고 있다. 본원에서 차폐 구조물을 설치하였을 경우에 측정된 태아선량은 약 1 cGy로 측정되었고, 고안된 차폐구조물은 태아에 도달하는 방사선량을 감소시키기에 적합한 설계임이 입증되었다. 아니라 일반종합병원에서도 CTX-M형 ESBL 생성 E. coli와 K. pneumoniae가 존재하며 확산 중임을 시사한다. 앞으로 CTX-M형 ESBL의 만연과 변종 CTX-M형 ESBL의 출연을 감시하기 위한 정기적인 연구와 조사가 필요한 것으로 생각한다., A2-1, B1-1, B2-1의 경우, 강우 일수 감소 이전과 연 유출량 변화는 거의

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.335-344
• /
• 2014

To understand the drift-diffusion of HAB(Harmful Algal Bloom) in this paper, we used three-dimensional hydrodynamic model POM(Pringceton Ocean Model) and Lagrangian particle track module. First, the results of residual flow that considered tide, wind, temperature, salinity, and TWC(Tsushima Warm Current) effect was tend to northeast in the coastal area and the flow in the offshore region showed results similar to TWC. To understand of HAB's movement, released each area that southern Kamak bay(Case 1), Mijo coast(Case 2), and southern Mireukdo coast(Case 3) assumption that red tide occurred. The areas where the HAB occurs frequently. As a result of HAB occurred in southern Kamak Bay(Case 1), mainly drifts to Narodo coast and Yeoja bay that located on the west side. Case 2 was mainly drifts to Yokjido coast and Saryangdo coast Especially, HAB occurred in Mireukdo coast(Case 3) relatively many particles drift to eastward as the influence of the TWC.