• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.503-510
• /
• 2016

Incinerators generally emit pollutants such as NOx and CO during the combustion process. In this paper, pollutant emissions and temperature distributions were studied in a simulated incinerator with a reversed (relative to the flue gas flow) secondary air injection system. The experiments were performed by using a lab-scale furnace in order to evaluate the effects of the injection location, direction and flow rate of secondary air jets. The emission of NOx was lower in the case of reversed secondary air injection than in the case of cross injection, due to the recirculation and mixing of the exhaust gas. In the reversed air injection cases, thermal NOx emissions decreased as secondary air ratio increased from 30 to 60 and slightly increased at secondary air ratios higher than 60. In most cases, CO emissions were not detected except for a few reversed secondary air injection cases, in which cases CO concentrations below 2ppm were observed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.204.2-204.2
• /
• 2015

산화물 반도체는 비정질임에도 불구하고 높은 이동도를 나타내며, 적은 누설 전류, 낮은 소비전력, 저온 공정 가능, 가시광선 영역에서 투명한 성질을 가지고 있다. 이와 같은 다양한 장점들로 인해 산화물 반도체를 이용한 트랜지스터는 차세대 플랫 패널 디스플레이 적용에 있어서 핵심 기술로 각광받고 있다. 한편, 소자의 크기가 점점 더 작아짐에 따라 고집적화에 따른 scaling down은 항상 언급되는 이슈이다. 이와 관련하여 소자의 높은 on current는 트랜지스터를 더 작게 구현할 수 있다는 가능성을 보여준다. 따라서 현재 소자의 on current를 높이기 위해서 소자의 구조를 변형하는 연구가 활발히 진행되고 있다. 본 연구에서는 소자의 on current를 높이기 위한 방법으로 ITO buried layer를 이용한 산화물 반도체 pseudo 트랜지스터를 제작하였다. 먼저 채널을 형성하기 전에 ITO buried layer를 형성시켜준 후, 채널 영역으로서 InGaZnO (2:1:1)를 용액 공정을 이용하여 형성시켰다. 이어서 소자의 전기적 특성 향상을 위해 마이크로웨이브 열처리를 1800 W에서 2분간 실시하였다. 또한 대조군으로 ITO buried layer를 갖지 않는 소자를 같은 방법으로 제작하여 평가하였다. 그 결과 ITO buried later를 갖는 소자에서 대조군과 비교하여 높은 on current를 나타냄을 확인하였다. 이와 같은 결과는 낮은 저항의 ITO buried layer가 current path를 제공함과 동시에 더 두꺼운 채널 층을 형성시켜 높은 on current에 기여하기 때문이다. 결과적으로 ITO buried layer를 갖는 소자 구조를 이용함으로써 고성능 트랜지스터를 제작하여 소자를 집적화 함에 있어서 유망한 소자가 될 것으로 예상된다.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.85-92
• /
• 1999

The complete catalytic oxidation of vinyl chloride was investigated over chromium oxide supported ${\gamma}$-alumina using a fixed bed micro-reactor at temperature between 240 and $300^{\circ}C$ and concentration between 600 and 3500 ppm. The oxidation of vinyl chloride was nonlinear in the concentration of vinyl chloride and zeroth order in the concentration of oxygen. The addition of HCl and $H_2O$ as products to the feed stream didn't influence the conversion of vinyl chloride. Several kinetic rate model were tested to describe the data over the range of condition investigated, and developed a model which provide the best correlation of experimental data. The resulting model of kinetic rate was derived by assuming that the reacting occurred via adsorption and subsequent decomposition of the vinyl chloride onto the oxygen covered chromium oxide surface, with the reaction being inhibited by the adsorption of vinyl chloride. The percent standard deviation between the predicted and experimental was about 5.2%, and the activation energy was 18.9 kcal/mol.

• Journal of the Korean Magnetics Society
• /
• v.23 no.4
• /
• pp.126-129
• /
• 2013

We have fabricated an ordered Ni nanodot structure using an alumina mask prepared via 2-step anodization technique under phosphoric acid. We have formed a porous structure with average pore size of 279 nm on $2{\mu}m$ thick alumina film and the thermal deposition of thin Ni film though the mask led to the formation of ordered Ni nanodot structure with an average dot size of 293 nm, following the pore structure on the mask. We further investigated the magnetic properties of the nanodot structure by measuring the hysteresis curve at room temperature. When compared to the magnetic properties of a continuous Ni film, we observed the decrease in the squareness and the increase in coercivity along the magnetization easy axis, due to the isolated nanodot structure. Our study suggests that the ordered nanodot structure can be easiy fabricated with thin film deposition technique using anodized alumina mask as a mask.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.381-381
• /
• 2009

염료감응형 태양전지의 효율 향상을 위한 다양한 방법들 중 $TiO_2$ 나노 파우더의 표면 개질 및 페이스트의 분산성 향상을 위한 연구가 활발하게 진행되고 있다. 기존 나노 파우더의 표면 개질법으로는 액상 공정인 졸겔법이 있으나 표면 처리 공정에서의 응집현상은 아직 해결해야 할 과제 중 하나이다. 이에 본 연구에서는 진공증착방법인 ALD법을 이용하여 염료감응형 태양전지용 $TiO_2$ 나노 파우더의 $SiO_2$ 산화물 표면처리를 통한 분산특성을 파악하였다. 기존 ALD법의 경우 reactor의 온도가 $300{\sim}500^{\circ}C$ 정도의 고온에서 공정이 이루어졌지만 본 실험에서는 2차 아민계촉매(pyridine)을 사용하여 reactor의 온도를 $30^{\circ}C$정도의 저온공정에서 $SiO_2$ 산화물을 코팅을 하였다. MO source로는 액체상태의 TEOS$(Si(OC_2H_5)_4)$를, 반응가스로는 $H_2O$를 사용하였고, 불활성 기체인 Ar 가스는 purge 가스로 각각 사용 하였다. ALD 공정에 의해 표면처리 된 $TiO_2$ 나노 파우더의 분산특성은 각 공정 cycle에 따라 FESEM을 통하여 입자의 형상 및 분산성을 확인하였으며 입도 분석기를 통하여 부피의 변화 및 분산 특성을 확인하였다. 공정 cycle 이 증가함에 따라 입자간의 응집현상이 개선되는 것을 확인 할 수 있었으며, 100cycles에서 응집현상이 가장 많이 감소하는 것을 확인할 수 있었다. 또한 표면 처리된 $SiO_2$ 산화막은 XRD를 통한 결정 분석 및 EDX를 통한 정성 분석을 통하여 확인하였다.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.588-596
• /
• 1996

The optimum conditions of the 1st and 2nd distillation had been investigated to obtaine a high quality monomeric MDI and fire reactive polymeric MDI by purification of crude MDI. Effect of additives on the monomeric MDI's color change, dimerization and the reactivity of polymeric MDI with standard polyol system has been tested. When the monomeric MDI yield is approximately 32%, 4,4'-MDI content is above 98% in the monomeric MDI at the 1st distillation. When the separation ratio of initial portion and residue percentage, reflux ratio are set at respectively, approximately 20wt%, 9wt%, above 2 in order to minimize the content of 2,4'-MDI in monomeric MDI, the freezing point of final distilled monomeric MDI is above $38.4^{\circ}C$. Since the monomeric MDI is inherently unstable in the room condition, monomeric MDI easily changes it's color and conducts self-polymerization reaction. To increase the stability of monomeric MDI, the composition of antioxidant, which is composed of phenolic 1st antioxidant, phosphorus 2nd antioxidant, UV absorbent and Hindered amine light stabilizer are used, and benzoyl chloride as antipolymerization agent test are that APHA color is less than 20, dimer content is remained less than 0.36wt% after 45 days storage of monomeric MDI.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.1
• /
• pp.78-83
• /
• 2011

The flower of Chrysanthemum morifolium Ramat. with antioxidant, anticancer, and anti-inflammatory functions has been a widely used traditional herb as a healthy beverage and medicine. The aim of the present study was to investigate a herb tea consisting of C. morifolium Ramat., Corni fructus and Schizandra chinensis Baillon for its hepatoprotective activity against $CCl_4$-induced toxicity in freshly isolated rat hepatocytes and antigenotoxic effect against oxidative stress induced DNA damage in human leukocytes. Three different compositions of the herb tea (Mix I, II, and III) were prepared by extracting with water at $90^{\circ}C$. Freshly isolated rat hepatocytes were exposed to $CCl_4$ along with/without various concentrations of each tea. Protection of rat primary cells against $CCl_4$-induced damage was determined by the MTT assay. The significant antihepatotoxic effect of the tea was shown in Mix I and II. The increased transaminase (AST and/or ALT) release in media of $CCl_4$ treated hepatocytes was significantly lowered by all the teas tested. The effect of the tea on DNA damage in human leukocytes was evaluated by Comet assay. All teas showed a protective effect against $H_2O_2$-induced DNA damage. From these results, it is assumed that herb tea based on C. morifolium Ramat., Corni fructus and Schizandra chinensis Baillon exerted antihepatotoxic and antigenotoxic effects.

• Clean Technology
• /
• v.23 no.2
• /
• pp.133-139
• /
• 2017

Bio-based plastics containing the biomass content higher than 25 wt% have been considered as environment-friendly materials due to their effects on the reduction in the $CO_2$ emission and petroleum consumption as well as biodegradability after use. In this study, poly vinyl chloride, plant-derived plasticizers, by adding a biodegradable catalyst was observed a change in the biodegradability and physical properties. To produce the oxidative decomposition transparent bio film, which is broken down in the initial percent elongation and physical properties such as tensile strength, it was to test the safety of the product as a food packaging material. Poly vinyl chloride, primary plasticizer, secondary plasticizer, anti fogging agent, the combined stabilizer were mixed in a high speed mixer, then extruded using an extrusion molding machine, after cooling, winding, to produce a oxidative decomposition transparent bio film and the control film, with a thickness of $12{\mu}m$ through winder role. Mechanical properties tensile strength, elongation, and the maximum load elongation and biodegradation test. Transparent bio film produced by biodegradation catalyst is compared with the control film. Tensile strength and elongation of films were found to be no significant difference. Further, as a result of the biodegradation test for 45 days based on the ASTM D6954-04 method, biodegrability of film is 61.4%.

• 한국전기화학회:학술대회논문집
• /
• 2002.07a
• /
• pp.271-276
• /
• 2002

고체산화물 연료전지의 구성요소인 전해질의 $(La_{1-x}Sr_x)(Ga_{1-y}Mg_y)O_{3-\delta}$계의 결정상 및 미세구조특성을 연구하였다. Mg의 첨가량이 증가할수록 Sr의 고용량도 증가하였으며 Sr의 함량이 많으면 2차상인 $LaSrGa_3O_7$상이 생성되었으며 Mg의 첨가량이 증가함에 따라서는 $LaSrGaO_4$상이 생성되었다. $LaSrGaO_4$상이 생성된 경우에는 낮은 전도도를 나타내었으며 $LaSrGa_3O_7$상의 경우에는 전기전도도에 큰 영향을 미치지 않았다. 또한 Sr과 Mg 첨가량의 증가는 grain 성장을 억제하였으며 $(La_{0.8}Sr_{0.2})(Ga_{0.8}Mg_{0.2})O_{3-\delta}$는 $1000^{\circ}C$에서 0.1S/cm 정도의 전기전도도를 나타내었다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.307-308
• /
• 2002

최근 들어 지구환경의 보전 필요성이 그 어느 때보다도 강하게 제기되면서 대류권 내에서 진행되는 광화학적 대기오염 현상과 그에 따른 오존농도의 증가에 대해 많은 관심이 집중되고 있다 광화학적 대기오염현상이란 대기중의 휘발성 유기화합물(Volatile Organic Compounds VOCs)과 질소산화물(NOx)이 햇빛 내의 자외선에 의해 반응하면 오존, 알데히드, peroxyacetyl nitrate 등과 같은 2차 오염물질인 광화학 산화물을 생성하는 것을 의미하는데 이 광화학 산화물은 생물체에 악영향을 주고 아울러 성층권의 오존층을 파괴하여 궁극적으로는 지구 온난화 현상의 원인이 되고 있다. (중략)