• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.114-119
• /
• 1998

Intensity and stability of the blue color of phospho-molybdate complex in P analysis are known to be influenced by the matrix, reducing regent and acidity of the extractants. Objective of this research was to compare the efficiency of the color-developing reagents for P concentrations in distilled water and extracts of Lancaster, Mehlich II, and Mehlich III methods. Efficiencies on which to base this study were evaluated by the optimum ranges of P, reproducibility of calibration curve and stability of the developed color. Color-developing reagents employed were ammonium molybdate-1,2,4- aminonaphtholsulfonic acid (ANS), ammonium molybdate-ascorbic acid-bismuth subcarbonate (AB), and ammonium molybdate-ascorbic acid-antimony potassium tartarate (AA). The ANS revealed the lowest sensitivity but the widest ranges for P concentrations in color development. On the other hand, the AA bore the narrowest color-developing ranges and its sensitivity was similar to AB. However, at P concentrations lower than $0.5mg\;L^{-1}$, AA was more sensitive than AB. Based on the data on the ranges of calibration curve, stability of color and reproducibility of analytical data. AA reagent was considered to be suitable for the determination of P in distilled water and AB reagent was practically recommendable for soil P analysis in extracts by Lancaster, Mehlich II, and Mehlich III procedures.

• Journal of dental hygiene science
• /
• v.17 no.1
• /
• pp.1-11
• /
• 2017

There are 82 dental hygiene departments and clinical training institutes across the country with a very wide range of clinical practice content and evaluation methods, making standardization difficult. Therefore, there is a need to establish a standard protocol outlining clinical practice content and evaluation methods for systematic and efficient operation of clinical practice. Thus, this study attempted to propose such a protocol for standardization of dental hygiene clinical practice in dental clinics and hospitals to examine the contents of clinical practice by reviewing relevant literature, and relating it to professional practice within the dental hygienic curriculum to facilitate enhancement of expertise. Clinical practice content was extracted from 74 cases, and was consisted of classifying mandatory and optional clinical practice, training time, and activity methods for each component. To standardize effective clinical practice, it is necessary to organize the components acquired in the course of clinical dentistry training in line with their arrangement on each university's curriculum, in order to learn all components step by step. To do this, it is necessary to present a standardized clinical practice protocol and a organic cooperation between educational institutions and clinical training institutions.

• Composites Research
• /
• v.30 no.2
• /
• pp.138-144
• /
• 2017

Damage sensing of polymer composite films consisting of poly(dicyclopentadiene) p-DCPD and carbon nanotube (CNT) was studied experimentally. Only up to 1st ring-opening polymerization occurred with the addition of CNT, which made the modified film electrically conductive, while interfering with polymerization. The interfacial adhesion of composite films with varying CNT concentration was evaluated by measuring the wettability using the static contact angle method. 0.5 wt% CNT/p-DCPD was determined to be the optimal condition via electrical dispersion method and tensile test. Dynamic fatigue test was conducted to evaluate the durability of the films by measuring the change in electrical resistance. For the initial three cycles, the change in electrical resistance pattern was similar to the tensile stress-strain curve. The CNT/p-DCPD film was attached to an epoxy matrix to demonstrate its utilization as a sensor for fracture behavior. At the onset of epoxy fracture, electrical resistance showed a drastic increase, which indicated adhesive fracture between sensor and matrix. It leads to prediction of crack and fracture of matrix.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.575-587
• /
• 1999

This study was designed to evaluate the correlations between tongue with skeletal pattern and intermaxillary space in Class II malocclusion adult patients. Craniofacial skeletal pattern was analyzed on the lateral cephalometric radiograph and the subjects were devided two groups by facial ratio, the 30 subjects of hyperdivergent group and the 30 subjects of hypodivergent group. The size and posture of tongue and intermaxillary space were measured on the lateral cephalometric radiograph. These data were statistically analyzed to examine significant differences between both groups and compared the correlation between tongue with skeletal measurements and intermaxillary space in each group. The results of this study were as follows. 1. In comparison of the tongue and intermaxillary space, the measurement of TS/IS showed significantly larger in hyperdivergent group and PIH and IS showed significantly larger in hypodivergent group. There were no statistically significant differences in the measurements of the height and posture of tongue. 2. In correlation between tongue with craniofacial skeletal measurements, the length and height of tongue showed the highest correlation with AFH(anterior facial height) in both groups(p<0.01). And that measurements showed high correlation with PFH(posterior facial height) in hypodivergent group. 3. In both groups, most measurements of tongue showed high correlation with intermaxillary space and the height and space of tongue showed high correlation with AIH and PIH(p<0.01).

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.457-471
• /
• 1997

The Purpose of this study was to estimate relative importance among the causative factors o( arch length discrepancy(ALD) and Possibility of prediction of the ALD in the mixed dentition. The sample consisted of the casts of the 142 young adults who had no abnormal muscle function, no skeletal abnormalities and Class I molar relationship. We classified the sample by gender and the extent of ALD, and measured mesiodistal diameters of each tooth and the dimensions of the dental arch. The computerized statistical analyses was carried out with SPSS win program. The results were as follows ; 1. Most of the variables of spacing group and some variables of dental arch dimension of crowding group were significantly different between genders. But in normal group, there were few differences. 2. In male crowding and female spacing group, mainly measurements of tooth dimension were significantly different from those of normal group. 3. In male spacing and female crowding group, measurements of dental arch dimension were significantly different from those of normal group. 4. The measurements of dimension of dental arch were highly correlated with ALD in correlation analysis and factor analysis. 5. Prediction equations for adult's ALDs by means of what can be measured in the mixed dentition(mesiodistal dimensions of incisors and first molar, intermolar width and arch length) showed R square from $63\%$ to $80\%$.

• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.323-337
• /
• 2003

This study was performed to establish Korean soft tissue cephalometric norms, to compare the norms between sexes and between races, and then to suggest a guideline to execute orthodontic diagnosis and treatment planning for dentofacial deformities in Korean. Young Korean adults were selected. They were 27 males $(23.8{\pm}2.6-year-old)$ and 20 females $(22.5{\pm}1.7-year-old)$ who had harmonious facial balance. After taking lateral cephalograms under the natural head position which is widely known as a highly reliable and reproducible reference position, films were traced and analysing factors were measured as introduced by Arnett et at. Comparisons were done between male and female groups and between Korean and Caucasian groups using unpaired t-test. From the results it was concluded that Korean male had generally thicker lower facial soft tissue and smaller nasolabial angle, longer facial height, deeper facial depth, and more protrusive lower face than Korean female. From the comparison with Caucasian norms adopted from the research of Arnett et al., both Korean male and female showed longer facial lengths generally except less exposed maxillary incisor, and shorter facial depth than Caucasian counterparts. Also, both races showed similar horizontal position of maxillary structures from TVL (true vertical line), but there were more significant anteroposterior differences of marilla-mandible in Korean groups. These results mean Korean had relatively more retruded mandibular structures from the reference line, TVL. Individuals who had harmonious facial balance showed similar facial angle, more or less 170 degree, regardless of sexes or races.

• Restorative Dentistry and Endodontics
• /
• v.31 no.2
• /
• pp.96-102
• /
• 2006

There are various factors affecting the fracture of NiTi rotary files. This study was performed to evaluate the effect of cross sectional area, pecking motion and pecking distance on the cyclic fatigue fracture of different NiTi files. Five different NiTi $files-Profile^{(R)}$ (Maillefer, Ballaigue, Switzerland), $ProTaper^{TM}$(Maillefer, Ballaigue, Switzerland), $K3^{(R)}$ (SybronEndo. Orange, CA) , Hero $642^{(R)}$ (Micro-mega, Besancon, France), Hero $Shaper^{(R)}$ (Micro-mega, Besancon, France)-were used. Each file was embedded in temporary resin, sectioned horizontally and observed with scanning electron microscope. The ratio of cross-sectional area to the circumscribed circle was calculated. Special device was fabricated to simulate the cyclic fatigue fracture of NiTi file in the curved canal,. On this device, NiTi files were rotated (300rpm) with different pecking distances (3 mm or 6 mm) and with different motions (static motion or dynamic pecking motion) . Time until fracture occurs was measured. The results demonstrated that cross-sectional area didn't have any effect on the time of file fracture. Among the files, $Profile^{(R)}$ took the longest time to be fractured. Between the pecking motions, dynamic motion took the longer time to be fractured than static motion. There was no significant difference between the pecking distances with dynamic motion, however with static motion, the longer time was taken at 3mm distance. In this study, we could suggest that dynamic pecking motion would lengthen the time for NiTi file to be fractured from cyclic fatigue.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.60-66
• /
• 2006

The purpose of this study was to suggest a new detection method for early diagnosing diabetic neuropathic foot by obtaining a ratio of toe to finger blood flow using photoplethysmography(PPG) and Laser Doppler(LD). Nerve conduction velocity (NCV) has been routinely used for diagnosing neuropathic foot, but it applies strong electric stimulus to peripheries resulting in stress and pain. The blood flow ratio of 50 neuropathic diabetes($0.96{\pm}0.20$) was significantly higher than that of 64 normal person($0.46{\pm}0.15$)(p<0.000). It also showed that toe temperature of neuropathic diabetes($30.5{\pm}1.4^{\circ}C$) was significantly higher than that of normal group($29.3{\pm}2.0^{\circ}C$)(p<0.000). The optimal boundary value of the blood flow ratio was found to be 0.678 and the sensitivity and specificity of this proposed method resulted in 95.3% and 95.3% respectively. Lastly, there were no neuropathic diabetes whose temperature difference between finger and toe was higher than $4.5\;^{\circ}C$.

• Composites Research
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2000

During the compression molding process of the continuous fiber-reinforced polymeric composites, two main problems such as fiber-matrix separation and fiber orientation are produced by the difference of flow velocity. Molded parts are lead to be nonhomogeneous and anisotropic. As the mechanical property of the products are dependent on the separation and orientation, it is important to research the fiber mat structure and molding condition. If the fiber mat structure is changed by the increment of needling, the separation decreases and after compression molding the orientation is easily aligned. As it were, the compression moldability is good. But the defects as tears, thin thickness are produced in the products. Therefore, it is important to clarify the moldability in relation to the usage of products and the expenses of produce on the actual process. Therefore we must make the measurement methods that can define the moldability of products. In this research, the effects of the fiber mat structure(NP = 0, 5, 10, 25, 50 punches/$cm^2$) and the mold geometry($r_p$ = 1, 25, 50 mm) on the moldability of products were discussed. We investigated the case of one-dimensional flow in order to obtain the degree of nonhomogeneity and the fiber orientation function. In result, we could gain the correlation coefficient of the continuous fiber-reinforced polymeric composites. Also we experimented on the cup-type compression molding which was appeared the wrinkle on the flange part by the complex stress condition in order to gain the degree of nonhomogeneity and area ratio. In result, the moldability of products was expressed as the correlation coefficient and area ratio.

• Journal of the Korean Geographical Society
• /
• v.30 no.3
• /
• pp.207-229
• /
• 1995

The characteristics of weather and climate in South Korea has great influences on the annual variation pattern and the appearance of the prevailing weather. The purpose of this paper is to induce the quantity of the weather entropy and annual variation pattern using the information theory and the principal component analysis. And author tried to classify the region according to the variation of its space scale, The raw materials used for this study are the daily cloudiness and precipitation during the years 1990-1994 at 69 stations in South Korea. It is divided into four classes of fine, clear, cloudy and rainy. The rcsults of this study can be summarized as follows: 1. Thc characteristics of annual variation pattern of weather entropy can be chiefly divided into five categories and the accumulated contributory rate of these is 73.1%. 2. Annual variation pattern of the first principal component reaches smaller in May, April and September than national average, and becomes greater when the winter comes. This weather entropy's quantity(Rs1) is positive in most area to the western sife of Soback Mountains and negative in most seaside area to the eastern side of Soback Mountains. 3. The characteristics of annual variation pattern of the second principal component shows that the entropy is more smaller in summer than national average and the rest of seasons shows larger, especially in January, May and September. This weather entropy's quantity(Rs2) is positive in most Honam Inland area to the western side of Soback Mountains and negative in most Youngnam Inland area to the eastern side of Soback Mountains. 4. Eight type regions (S1-S11) are classified based on the occurrences of minimum weather entropy in South Korea, and annual variation pattern of weather entropy by principal component analysis may be classified into sixteen type regions (Rs1-Rs9). Putting these things together, South Korea can be classifieed into thirty one type regions (Rs1S7-Rs9S10).