• Convergence Security Journal
• /
• v.12 no.4
• /
• pp.3-8
• /
• 2012

Smartphones have all the recent technology integration and NFC (Near Field Communication) Technology is one of them and become an essential these days. Despite using smartphones with NFC technology widely, not many security vulnerabilities have been discovered. This paper attempts to identify characteristics and various services in NFC technology, and to present a wide range of security vulnerabilities, prevention, and policies especially in NFC Contactless technology. We describe a security vulnerability and an possible threat based on human vulnerability and traditional malware distribution technic using Peer-to-Peer network on NFC-Enabled smartphones. The vulnerability is as follows: An attacker creates a NFC tag for distributing his or her malicious code to unspecified individuals and apply to hidden spot near by NFC reader in public transport like subway system. The tag will direct smartphone users to a certain website and automatically downloads malicious codes into their smartphones. The infected devices actually help to spread malicious code using P2P mode and finally as traditional DDoS attack, a certain target will be attacked by them at scheduled time.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.82-92
• /
• 2012

This study proposed a new non-destructive evaluation method for concrete bridge deck deterioration using ground penetrating radar (GPR). To calculate dielectric constant of the concrete bridge deck, an extended common mid-point (XCMP) method was developed for a two-layered structure using an air-coupled GPR antenna setup. The deterioration conditions of the concrete bridge deck such as deterioration depth was evaluated based on the dielectric constant and surface-to-average dielectric constant ratio of the concrete bridge deck. A GPR field test was conducted on an old concrete bridge with asphalt concrete surfacing to validate the new evaluation method. The test results showed that the newly proposed method estimated pavement thickness and deterioration depth of the concrete deck in a reasonable level.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.2
• /
• pp.97-103
• /
• 2018

Purpose: The aim of this study was to evaluate the Bonwill triangle of Korean using the cone beam computerized tomography (Cone-beam CT). Materials and Methods: 120 Koreans (60 males and 60 females) who visited Daejeon Dental College Hospital of Wonkwang University and who underwent the Cone-beam CT were selected. The Cone-beam CT images were analysed with Invivo 5.1 (Anatomage, San Jose, USA). After reorientation of axis, the intercondylar distance was measured by clicking both middle points of condyle. And the condyle-incisor distance was measured by clicking the middle point of condyle and contact point of the mandibular central incisor's incisal edge. The collected data were analysed using the SPSS Version 23.0 (IBM Inc., Armonk, USA) and statistical significance was verified by gender using independent t-test. Results: The mean intercondylar distance of Korean was 105.9 mm, and the male (108.3 mm) was statistically significantly larger than the female (103.4 mm). The mean condyle-incisor distance of Korean was 105.2 mm, and the male (108.1 mm) was statistically significantly larger than the female (102.3 mm). Conclusion: The mean intercondylar distance of Korean in this study was 105.9 mm that was smaller than well-known 110 mm of Caucasian and the male was statistically significantly larger than the female. Within the limitations of this study, it would be necessary to use the articulator which can adjust the intercondylar distance according to the individual for prosthodontic treatment of Korean.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1109-1113
• /
• 1999

sothemal reduction at $50^{\circ}C$ using $Pt/MoO_3$ or $Pt/MoO_3/SiO_2$ made by dry impregnation or physical mixture of $Pt^{\circ}$ and $MoO_3$ demonstrated that the $H_2$ uptake vis $H_2$ spillover from Pt into $MoO_3$ was enhanced as calcination temperature was increased. Surface area of exposed Pt crystallites measured by CO chemisorption was decreased with higher calcination temperature. In addition, TEM showed that $MoO_x$ overlayers were formed on Pt crystallites after calcination at $400^{\circ}C$. Consequentially, it was found that this increased active contact sites between Pt and $MoO_3$ due to surface morphological change was one of the dominant factors for this increased $H_2$uptake via $H_2$ spillover from Pt crystallites into $MoO_3$.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.4
• /
• pp.256-263
• /
• 2010

A Crofer 22 APU mesh coated with a conductive ceramic material was developed as an alternative cathode current collector to Ag-based materials for solid oxide fuel cells. $(La_{0.80}Sr_{0.20})_{0.98}MnO_3$ (LSM) layer was deposited onto the Crofer mesh using a spray-coating technique, in an attempt to mitigate the degradation of electrical properties due to surface oxidation at high temperatures. The oxidation experiments at $800^{\circ}C$ in air indicated that the areaspecific resistance (ASR) of the LSM-coated Crofer mesh was strongly dependent on the wire diameter and the contact morphology between mesh and cell. In addition, the post-heat-treatment in $H_2/N_2$ resulted in a reduced thickness of Cr-containing oxide scales at the interface between Crofer mesh and LSM layer, leading to a decreased ASR.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.128-133
• /
• 2009

In this paper, an optical touch panel device is newly proposed, with operating principle based on the optical coupling between a pointing pen having a built-in light source and perpendicularly crossed optical waveguide arrays. In order to enable an external light to couple into a waveguide core, the auxiliary pyramidal structures are introduced into all intersecting points located periodically along optical waveguides. The shape is optimized for minimizing the unwanted propagation loss due to the same structure by a ray tracing method. For the optical waveguide with the size of $50{\times}50{\mu}m^2$, the bottom width, height, and slope angle of the optimized pyramidal structure are $50{\mu}m$, $22.5{\mu}m$, and $42^{\circ}$, respectively. The optical coupling efficiency of about 97.8% and the average propagation loss of 0.3 dB/mm were achieved for the optimized touch panel. Finally, it is found from the tolerance analysis that tilting of the pen up to ${\pm}12^{\circ}$ can be allowed.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.413-419
• /
• 2016

Ryanodine receptors (RyRs) regulate the contractions of insect muscles by altering intracellular $Ca^{2+}$ concentration and are the targets of chlorantraniliprole. Recently, a chlorantraniliprole-resistant strain was reported in the diamondback moth Plutella xylostella by obtaining point mutations on the RyRs. In the present study, we established two resistant strains from Drosophila melanogaster, which were treated with low or high concentrations of chlorantraniliprole, and their resistance levels were determined on the basis of contact and ingestion toxicities. Compared with the control strain, the two resistant strains did not show any significant differences in contact toxicity. However, they showed significantly increased resistance ratios in ingestion toxicity than that by the control strain. The low and high concentration resistant strains exhibited 2.1- and 8.1-fold increased resistance ratios, respectively, compared with that by the control strain. Moreover, we found that the resistant strains had altered expression levels of RyRs and more enhanced Acetylcholinesterase and Glutathione-S-transferase activities than that by the non-selected strain. These results suggested that the resistance development of chlorantraniliprole in the two strains might be mediated by the activation of detoxification pathways in D. melanogaster.

• Polymer(Korea)
• /
• v.25 no.3
• /
• pp.435-440
• /
• 2001

The objective of this study was to examine the effect of oxidation inhibitor contents on the work of adhesion, fracture toughness, and impact strength of the unidirectional carbon-carbon composites (C/C composites). The molybdenum disilicide ($MoSi_2$) used as an oxidation inhibitor was impregnated with phenolic resins to improve the anti-oxidation properties of the composites in different concentrations of 4, 12 and 20 wt%. Based on Wilhelmy equation, the work of adhesion of C/C composites was calculated by contact angle methods. Fracture toughness and impact strength were pressured by three-point bending test for the critical intensity factor ($K_IC$) and Izod test method, respectively. As a result, the composites made with $MoSi_2$ resulted in an increasing of both fracture toughness and impact strength. Especially, the composites made with 12 wt% $MoSi_2$ content showed the highest value of London dispersive component, $W_A\;^L$, in work of adhesion, resulting from improving the interfacial adhesion force among fibers, filler, and matrix in this system.

• Composites Research
• /
• v.19 no.2
• /
• pp.28-34
• /
• 2006

[ $Cu-TiB_2$ ] metal matrix composites with various weight fractions of $TiB_2$ were fabricated by combination of manufacturing process, SPS (self-propagating high-temperature synthesis) and SPS (spark plasma sintering). The feasibility of $Cu-TiB_2$ composites for welding electrodes and sliding contact material was investigated through experiments on the tensile properties, hardness and wear resistance. To obtain desired properties of composites, composites are designed according to reinforcement's shape, size and volume fraction. Thus proper modeling is essential to predict the effective material properties. The elastic moduli of composites obtained by FEM and tensile test were compared with effective properties from the original Eshelby model, Eshelby model with Mori-Tanaka theory and rule-of-mixture. FEM result showed almost the same value as the experimental modulus and it was found that Eshelby model with Mori-Tanaka theory predicted effective modulus the best among the models.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.4-4
• /
• 2000

일반적인 액체추진제 로켓엔진의 연소는 분사제트의 미립화, 액적의 증발, 기상 추진제의 혼합, 화학반응 등, 일련의 물리적 과정들로 이루어지고, 여기서 특성속도 효율은 크게 분사특성 및 연소의 두 단계에서 결정되게 된다. 액체추진제 로켓엔진에 사용되는 여러 분무형태 중, 동축형 분사기에서는 액상과 기상 제트의 운동량 차에 의해 미립화가 이루어지며, 분무 액적들의 전개와 더불어 분사기 출구를 포함한 전 영역에서 연소가 발생되므로 매우 복잡한 물리적 특성들을 포함하게 된다. 본 연구에서는 기상 연료-액상 산화제의 동축형 분무연소를 JANNAF의 방법을 사용하여 수식화 하였으며, 이를 바탕으로 분무특성과 연소성능 예측을 위한 프로그램을 작성, 분사조건에 의한 분무특성과 그에 따른 연소성능을 계산하였다. 연속, 운동량, 에너지 및 혼합비 방정식의 지배방정식들을 바탕으로 기상 유동을 수식화 하였으며, 별도로 액적의 소산 및 연소과정을 모사하기 위한 별도의 수식들이 추가되었고, 이 식들을 결합하여 액적의 크기, 분포를 포함하는 액체 제트의 미립화 정도를 공간적으로 계산하였다. 미립화 모델의 검증을 위하여 계산 결과를 Reitz의 실험과 Giridharan의 모델 등과 비교하였으며 잘 일치하는 경향을 나타내었다. 또한 동축형 분사기에서의 분무 특성을 예측하기 위해 액체 산소, 기체 수소를 추진제 조합으로 하는 동축형 분무 연소장에서의 제트 길이, 액적의 크기, 액체 제트의 속도를 계산하였다. 계산 결과 액체 제트의 접촉길이는 분사공의 지름이 증가할수록 웨버수가 증가되므로 짧아지는 것으로 관찰되었으며 액적의 크기도 분사공의 지름이 증가할수록 작아지는 경향을 나타내었다. 액체 제트의 속도는 처음에는 일정하게 유지되다가 운동량을 보존하기 위해 가스로부터 운동량을 받아 점차 가속되어지는 것으로 나타났다.본 규격은 키, 총장, 어깨길이, 등길이, 머리길이, 머리둘레, 진동둘레, 목둘레, 가슴둘레, 허리둘레, 배둘레, 엉덩이둘레, 앞품, 뒤품, drop치를 포함하고 있고, 각 규격에서 호칭간 치수 간격도 함께 제시하고 있다. 본 연구 결과에서 보듯, 현행 8규격의 무진복의 각 호칭간 적정 허용범위를 고려해 합리적인 치수체계를 정립한다면 치수에 대한 적합도가 상당히 증가할 뿐 아니라 생산비용도 상당히 감축할 것으로 생각된다.나타났다. 4) 호감적 서비스능력 차원에서 세 독립변수간에 유의한 3원 상호작용이 존재하는 것으로 나타나( $F_{2,228}$=15.62, P<.001) 20대에 적합한 의복 착용시( $F_{2,228}$=3.98, P<.05)와 60대에 적합한 의복 착용시( $F_{2,228}$=16.55, P<.001) 점포유형과 격식차림간에는 유의한 상호작용이 존재하는 것으로 나타났다. 5) 호감을 구성하는 세 요인들이 구매의도에 미치는 영향을 조사한 결과 호감적 인상차원은 29%(P<.001), 호감적 서비스능력차원은 6%(P<.001)의 구매의도를 설명해 주는 것으로 나타났다. 본 연구결과 노년 소비자에게 호감을 주는 판매원의 외모는 구매의도에 영향을 주어 실버의류산업의 이익증대와 밀접한 연관을 갖는 서비스품질의 중요한 요인으로 밝혀졌다.중요한 요인으로 밝혀졌다.로운 단백질 EPSPS가 다른 여러 식물에 이미 존재하고 있는 단백질로서 우리가 이미 이러한 식품을 섭취할 때 이 단백질도 같이 섭취해오고 있었다는 점, 둘째. 이 단백질이 소화액 분해 실험에서 짧은 시간내에 분해가 되었다는 점, 셋째. 재조합 된 콩과 자연 콩이 성분 분석에서 차이를 나타내지 않았다는 점, 네 번째. 쥐를 통한 다양섭취 실험에서 아무런 이상 반응이 없었